AGPTEK F19-2 Ice Cleats User Manual

F19-2 Ice Cleats
User Manual

F19-2 Ice Cleats

Please read this [user manual] carefully before use and keep it for future reference.
WARNING:
Please read this manual carefully before using.

1. Adjust the size that is suitable for your boots. The length should be slightly shorter than the shoe by 3-5mm, not too short or exceeding the length of the shoe. Note: Inappropriate size will cause discomfort and danger.
2. Please do not use on concrete floors, wooden floors, cement roads and indoor spaces.

Using Steps

1. Fit the front part of your shoes.

2. Adjust the back sides.

3. Fix the Velcro strap into one side of the ice cleats.

4. Cross the Velcro strap into another side and tighten it. Then stick the Velcro together.

Maintenance

1. Keep ice cleats clean and dry. After using, do not leave the dirty and wet ice cleats in the storage bag. You should clean up the ice and snow in time to avoid corrosion of the metal after turning into snow water and cause rust.
2. Using the ice cleats for a long time, the tips will become blunt. You should grind them slowly with a file in time. Please do not use an electric grinding wheel, because the high temperature generated by the electric grinding wheel will change the steel of the ice cleats.
3. Please do not heat ice cleats, as the strength and durability of ice cleats will be damaged.
4. The ice cleats are sharp, be careful when storing and using, to avoid get injured.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>