AGPTEK SY-818 LED Christmas Projector Light User Manual
- June 7, 2024
- AGPTEK
Table of Contents
AGPTEK SY-818 LED Christmas Projector Light User Manual
General Introduction
- Ocean Wave + Pattern Light Projector: Equipped with two projection heads, one for RGBW water wave ripple effect and another for patterns image projection. Latest varied different colorful pattern slides with varied different color ocean wave effect for Halloween and Christmas.
- 100% Water Resistant for Outdoor: The projector light is rainproof for outdoor use. 16.4ft Long Power Cable with weather-resistant cap, long enough to connect with power and work great even if rain or snow.
- Effective Remote Controllability: Includes a remote controller to choose lights color, timer setting or flashing choice. Remote range up to 40ft.
- Way of Installation: There is a ground stake for outdoor use by stuck in the ground as well as the flat base for indoor activities. Just find the place you want then plug it into the ground, place on the flat surfaces or secure it into wall by screws and use the remote controller to change to the color and pattern or setting a time for working.
Important Tips
- This product is not a toy. Please keep away from children under 3 years old.
- This product contains small parts which may cause choking hazard if detached.
- Please DO NOT allow children to play with the ground stake since the end point of stake is sharp.
- Keep it away from fire and open flames.
- Place the light projector 16.4 to 26.3ft from projection surface for better results of brightness and visibility (under dark environment).
FAQs
Q: Timing failure.
- Check whether there is any electromagnetic interference in the surrounding area.
- Check whether the controller is working properly.
- Check whether the timing is not set, and then reset once: press timing button once and flash twice means opening timing; Press it again and flash three times means turning off timing.
Q: Too low brightness and visibility.
A: The projection effect is affected by the surrounding light source. Please keep the projection lamp used in a dark environment. The darker the environment, the brighter the projection effect.
Q: The shapes are too vague.
A: The projector effect is affected by the delivery distance, so do not place it too close or too far (Recommended distance is 5-8 meters).
Q: Why is it not the previously set pattern after restarting?
A: Directly disconnecting the adapter will make the product restore the factory settings, so do not turn off the projector by disconnecting the power. It is recommended to turn off the product by the remote control.
Package Contents
1Light Projector 1Base
1Remote Control 4Screws
1Power Adapter 1Instruction
1*Ground Stake
Specifications
– Power Input: 100-240V, AC50/60Hz, 1000mA (Only use with supplied
transformer)
– Total Power: 7W
– Ocean Wave LED Lights: 4 solid colors (Red, Green, Blue, White), 9 mixing
colors
– 2 Patterns Styles: Halloween, Christmas
– Working Temperature : 5℉-113℉（-15℃~45℃）
– Power Supply Waterproof Grade: IP44
– Product Waterproof Grade: IP65
– Power Cord: 16.4ft
– Application: Outdoor/Indoor Decoration
Remote Control Instructions
Set Timing Function: Press timing button once and the projector lamp flashes twice, which means enabling timing; Press it again and the projector lamp flashes three times, which means turning off timing.
Memory Function
After turning off, it will light up again to return to the mode before turning off. (Restore factory settings after power off)
Manufacturer: Shenzhen ShiYu Photoelectric Technology Co., Ltd.
Address: 2/F, NO.2 Building, Shengxuan Industrial Zone, Shilong Avenue
No.9, Shiyan Street, Baoan District, Shenzhen.
E-mail: support@agptek.com.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>