NAOMI HOME IdealBase Platform Bed Instructions
- June 7, 2024
- NAOMI HOME
Table of Contents
IdealBase Platform Bed
Please take a moment to read through the entire instruction booklet before
assembly to familiarize yourself with this product. Once you feel ready to
start, follow the instructions step by step and this should make this process
as easy as we could make it for you.
If you need help or have damaged or missing parts, contact customer service at
www.NaomiHome.com.
© 2017 Naomi Home Inc. – All Rights Reserved.
WARNING CAUTION
ADULT ASSEMBLY REQUIRED
CHOKING HAZARD
- This product includes small parts, sharp points and sharp edges in its unassembled state. Keep unassembled parts away from children under 3 years of age, & animals.
- If used improperly, your child may fall, creating a risk of injury or damage. Children should not be permitted to jump, climb or pull on the bed.
USE AND MAINTENANCE
-
Use on level surfaces only
-
Because this product needs assembly, it is prone to working itself loose from time to time depending on the use. Please take the time to check that all connections are still
tight and working properly for safety. -
Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.
PARENTAL SUPERVISION IS REQUIRED
- This Naomi Home product is intended for use age 3+.
- Parents or Guardians should supervise use under the intended age specifically regarding children that may have access to it and might climb on the unit.
ASSEMBLY RECOMMENDATIONS
- Check you have all the components and tools listed on pages 2 and 3.
- Do not stand or put weight on this product during assembly, this could cause damage.
- Remove all hardware from the plastic bags and separate them into their groups.
- Assemble the item as close to its final position (in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your floor.
- Make sure you have enough space to lay out the parts before starting.
- Parts of the assembly may be easier with 2 people.
- Dispose of all packaging carefully and responsibly.
- Do not use this item if any components are missing or damaged.
- We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only hand tighten.
COMPONENT PARTS
Please check that you have all the parts listed below.
ASSEMBLY HARDWARE
- For Double, Queen, King, and CA King sizes. Twin size is not required.
ASSEMBLY INSTRUCTIONS
-
Remove all components from the carton(s) and position them on the floor.
NOTE : Twin / Twin XL sizes (quantity 1). All other sizes (quantity 2). -
Unfold the unit from the center and lay flat.
-
Raise all six legs to the upright position.
Each of the four end legs has separate support arms. -
Rotate the support arms to hook onto the bolts and tighten with installed wing nuts. Repeat the process for the remaining three end legs
NOTE: The two center legs do require wing nuts. Turn the IdealBase over and upright
For Twin or Twin XL, Your Bed is Complete.
For all other sizes, repeat steps 1 – 4 for the additional IdealBase unit. -
Align both base units side by side where you intend to install the bed. Attach the two sides together by inserting bolt A to base unit 1 hole in the side of the main crossbar and through into base unit 2 and tighten the wing nut. Repeat for another end with 2nd Bolt.
ASSEMBLY COMPLETE
CONGRATULATIONS, YOUR NAOMI HOME IDEAL BASE THE PLATFORM BED IS COMPLETE!
www.NaomiHome.com
MADE IN CHINA
Product Packaging Information
Model #:83311
Color: Black
Shipment Ref. #:
Date:2018.8.10
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>