NAOMI HOME 78 Inch L x 45 Inch Deer Blind Playhouse Bunk Bed Instruction Manual

: June 9, 2024
: NAOMI HOME

Table of Contents

NAOMI HOME 78 Inch L x 45 Inch Deer Blind Playhouse Bunk Bed
Product Components
Product Usage Instructions
ASSEMBLY AT A GLANCE
COMPONENT PARTS
HARDWARE
ASSEMBLY INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NAOMI HOME-78-Inch-L-x-45-Inch-Deer-Blind-Playhouse-Bunk-
Bed

Deer Blind Playhouse Bunk Bed

The Deer Blind Playhouse Bunk Bed is a unique and fun bunk bed for kids. It measures 78 inches in length, 45 inches in depth, and 88 inches in height. It is manufactured by Naomi Home Inc. and all rights are reserved by them.

Product Components

Leg x4
Bottom bar x2
Top bar x2
Side guard rail x4
Wedge x4
Front crosspiece x1
Top crosspiece x1
Rear crosspiece x1
Guard rail x2
Rear bar x1
Rear bottom bar x1
Bottom front bar x1
Front top bar x1
Guard rail support x2
Front guard rail x2
Platter x1
Frame x4
Leg x2
Step x4
Roof x1
Window x1
Dais x1
Wood Dowel Pin 10×40 x50 (A)
Wood Dowel Pin 8×25 x8 (B)
Wood Dowel Pin 8×50 (C)
Screw 7×50 x4 (D)
Screw 7×70 x18 (E)
Screw 7×100 x20 (F)
Screw 1/4×80 x4 (G)
Plate x2 (I)
Allen Wrench x2 (J)
Angle x3 (K)
Screw 4×35 x26 (L)
Screw 4,0×30 x6 (M)
Screw 3,5×16 x14 (N)

Product Usage Instructions

Start by identifying all the components listed above.
Assemble the legs and bottom bars to create the base of the bunk bed.
Attach the top bars to the base using screws and dowel pins.
Add the side guard rails to the base and secure them with screws.
Insert the wedges on either side of the base to create a slope.
Attach the front crosspiece and top crosspiece to the top bars using screws and dowel pins.
Attach the rear crosspiece to the top bars using screws and dowel pins.
Attach the guard rails to the top bars using screws and dowel pins.
Attach the rear bar, rear bottom bar, bottom front bar, and front top bar to create the ladder using screws and dowel pins.
Attach the guard rail supports to the bottom bars using screws and dowel pins.
Attach the front guard rails to the guard rail supports using screws and dowel pins.
Insert the platter into the base of the bunk bed.
Attach the frames to the base using screws and dowel pins.
Attach the legs to the frames using screws and dowel pins.
Attach the steps to the ladder using screws and dowel pins.
Attach the roof to the top crosspiece using screws and dowel pins.
Insert the window into the front guard rails.
Attach the dais to the bottom bars using screws and dowel pins.
Finish assembling by adding all remaining screws, dowel pins,angles, plates, and nuts as indicated in the instruction manual.

Note: The first slats must be fixed at 3 inches from each headboard end.

Please take a moment to read through the entire instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.

WARNING A CAUTION

ADULT ASSEMBLY REQUIRED CHOKING HAZARD

This product includes small parts, sharp points and sharp edges in its unassembled state.
Keep unassembled parts away from children under 3 years of age, and animals.

STRANGULATION HAZARD

Never attach or hang items to any part of the loft bed that are not designed for use with the bed; for example, but not limited to hooks, belts, and jump ropes.

SIZE OF MATTRESS

A twin size mattress of 75″ Length x 39″ Width x 6 Inch Thickness (190.5 × 96.5 x 15.24 cm) is recommended. Surface of mattress must be at least 5 inches (12.7 cm) below upper edge of guardrails. Maximum mattress and foundation combined thickness of 8 inches (20.3 cm).

SAFETY WARNINGS

Follow the information on the warnings appearing on the cabana bed end structure and on the carton. Do not remove warning label from cabana bed.
Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls.
Surface of mattress must be at least 5 inches (127 mm) below upper edge of guardrails.
Do not allow children under 6 years of age to use the cabana bed.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the cabana bed.
Always use guardrails on both long sides of the cabana bed. If the loft bed will be placed next to the wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.

PARENTAL SUPERVISION IS REQUIRED

This Naomi Home Kids product is intended for child use age 6+.
Parents or Guardians should supervise use under the intended age specifically regarding children that may have access to it and climb on the unit.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
If used improperly, your low loft bed may be pulled over or fall, creating risk of injury or damage. Children should not be permitted to climb or pull on the cabana bed.
Always use the ladder for entering or exiting the cabana bed.

USE, MAINTENANCE & ASSEMBLY
Periodically check and ensure that the guardrail, ladder, and other components are in their proper position, free from damage, and that all connectors are tight.

Use on level surfaces only. Assemble on a soft level surface to avoid damage to unit or floor.
Do not use this item if any components are missing or damaged.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Only clean using damp cloth and mild detergent, do not use bleach or abrasive cleaners.
Check you have all components and tools listed on page 4
Do not stand or put weight on this product during assembly, this could cause damage.
Remove all hardware from the plastic bags and separate them into groups.
Assemble the item as close to its final position (in the same room) as possible.
Certain assembly steps may be easier with 2 people.
Dispose of all packaging carefully and responsibly.
We do not recommend power screwdrivers. Only use hand screwdrivers to prevent damage to unit.

ASSEMBLY AT A GLANCE

Please take a moment to read through the whole instruction booklet before assembly to familiarize yourself withthis product. Once you feel ready to start, follow the instructions step by step and this should make thisprocess as easy as we could make it for you.
Due to the number of parts involved assembly can take a few hours so set aside between 2 and 3 hours to assemble this without rushing.

This drawing is to give you an overall idea only of how this assembly will go together and does not replace the assembly instructions.

COMPONENT PARTS

Please check that you have all the parts listed below
Note: follow the setup of of Option 1 for ladder right configuration or Option 2 for ladder left configuration.

NAOMI HOME-78-Inch-L-x-45-Inch-Deer-Blind-Playhouse-Bunk-
Bed-1