NAOMI HOME Elsy 3 Drawer File Cabinet Two Tone Desk with Keyboard Tray Instruction Manual
- June 2, 2024
- NAOMI HOME
Table of Contents
NAOMI HOME Elsy 3 Drawer File Cabinet Two Tone Desk with Keyboard Tray
Product Information
Specifications
- Product Name: Elsy Contemporary Two-Tone Desk
- Manufacturer: Naomi Home
- Assembly Required: Yes
- Recommended Age: Adults
- Material: Wood
- Color: Two-tone
Product Usage Instructions
Assembly at a Glance
Before starting assembly, read the instruction booklet thoroughly. Follow the
step-by-step instructions provided in the manual to ensure a smooth assembly
process.
Component Parts
Check that you have all the listed parts before starting assembly to avoid any
issues during the process.
Assembly Hardware
Organize the assembly hardware according to the labeled parts to make it
easier to follow the instructions.
Assembly Instructions
- Follow the numbered steps in sequence to assemble the desk correctly.
- Refer to the diagrams in the manual to get an overall idea of how the assembly will come together.
- Use the provided tools and hardware to securely assemble each component of the desk.
- Take caution while assembling to avoid damaging any parts or causing injury.
FAQ
Q: What should I do if I encounter missing parts during assembly?
A: If you encounter missing parts, please contact customer service at
www.NaomiHome.com for assistance.
Q: Is it safe for children to climb or pull on the desk?
A: No, parental supervision is required to prevent any accidents or
damage caused by children climbing or pulling on the desk.
Q: How do I access the power panel on the desk?
A: Open the top cover of the desk to access the power panel and plug in
your devices as needed.
Assembly Instructions
Product Dimensions:
43.98 ”L×20”D×45”H
Please take a moment to read through the entire instruction booklet before
assembly to familiarize yourself with this product. Once you feel ready to
start, follow the instructions step by step and this should make this process
as easy as we could make it for you.
If you need help or have damaged or missing parts, contact customer service at
www.NaomiHome.com.
© 2022 Naomi Home, Inc. – All Rights Reserved.
WARNING
ADULT ASSEMBLY REQUIRED CHOKING HAZARD
- This product includes small parts, sharp points and sharp edges in its unassembled state. Keep unassembled parts away from children under 3 years of age, and animals.
SAFETY WARNINGS
- Follow the information on the warnings appearing on table and on the carton. Do not remove warning label from cabinet.
- Do not allow children under 3 years of age to use the desk.
- Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
FURNITURE TIP-OVER HAZARD
Children have died from furniture tip-over
To reduce the risk of furniture tip-over:
- ALWAYS install tip-over restraint especially if used by a wall or in the open.
- NEVER put a TV on this product
- NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- ALWAYS place heaviest items in lowest desk.
PARENTAL SUPERVISION IS REQUIRED
- Parents or Guardians should supervise use under the intended age specifically regarding children that may have access to it and climb on the unit.
- Do not allow horseplay on, under, or behind the unit and prohibit jumping on the cabinet.
- If used improperly, your table may be pulled over or fall, creating risk of injury or damage. Children should not be permitted to climb or pull on the desk.
USE, MAINTENANCE & ASSEMBLY
- Periodically check and ensure that the components are in their proper position, free from damage, and that all connectors are tight.
- Use on level surfaces only. Assemble on a soft level surface to avoid damage to unit or floor.
- Do not use this item if any components are missing or damaged.
- Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
- Only clean using damp cloth and mild detergent, do not use bleach or abrasive cleaners.
- Check you have all components and tools listed on page 4
- Do not stand or put weight on this product during assembly, this could cause damage.
- Remove all hardware from the plastic bags and separate them into groups.
- Assemble the item as close to its final position (in the same room) as possible.
- Certain assembly steps may be easier with 2 people.
- Dispose of all packaging carefully and responsibly.
- We do not recommend power screwdrivers.
- Only use hand screwdrivers to prevent damage to unit.
- Keep these instructions for future reference.
Enfants morts suite au basculement d’un meuble.
Afin de limiter le risque de basculement de meuble:
- TOUJOURS utiliser les fixations anti-basculement.
- NE JAMAIS installer de TV sur ce produit.
- NE JAMAIS laisser d’enfants se tenir debout sur les tiroirs,portes ou etageres, y grimper ou s’y suspendre.
- NE JAMAIS ouvrir plus d’un tiroir a la fois.
- TOUJOURS placer les choses les plus lourdes dans les tiroirs du bas.
ASSEMBLY AT A GLANCE
Please take a moment to read through the whole instruction booklet before assembly to familiarize yourself with this product. Once you feel ready to start, follow the instructions step by step and this should make this process as easy as we could make it for you.
This drawing is to give you an overall idea only of how this assembly will go together and does not replace the assembly instructions.
COMPONENT PARTS
Please check that you have all the parts listed below
- Top Panel ×1
- Left Desk Top Panel×1
- Left Desk Left Side Panel×1
- Left Desk Right Side Panel×1
- Left Desk Bottom Panel×1
- Left Desk Door×1
- Left Desk Back Panel×1
- Right Desk Bottom Panel×1
- Right Desk Top Panel×1
- Right Desk Left Side Panel×1
- Right Desk Right Side Panel×1
- Right Desk Back Panel×1
- Right Drawer Bottom Panel×3
- Right Drawer Back Panel×1
- Right Drawer Left Side Panel×1
- Right Drawer Right Side Panel×1
- Right Drawer Front Panel×1
- Right Drawer Back Panel×2
- Right Drawer Left Side Panel×2
- Right Drawer Right Side Panel ×2
- Right Drawer Front Panel×2
- Desk Drawer×1
- Middle Back Panel×1
ASSEMBLY HARDWARE
ASSEMBLY INSTRUCTIONS
STEP 1
Select 22(×1),A(×6),B(×1) and C(×1). Insert B(×1) into the 22 with the
A(×3).Repeat the steps for the C into 22. 
STEP 2
Select the G×4. Insert C into the H×2 with G×2. Repeat for the B.
STEP 3
STEP 4
Select I×8,H×4 and 1×1. Insert the H×2 into one side of 1 with I×4.Repeat for another H×2.
STEP 5
Select the D×8, E×8,F×8. Insert the D×4 and E×4 into the F×4 into the four holes of one side of 1. Repeat for the other side of 1.
STEP 6
Select J(×4), L(×4), E(×4), M(×4), V(×4) and 5(×1). Insert J(×4)and L(×4)
into top side of 5.Install the E(×4), M(×4), and V(×4) into bottom side of 5.
STEP 7
Select 3(×1), 4(×1) and P(×4). Align the holes on the side of 3 adn 4 to
the position of L(×4).Insert 5 into 3 and 4 with P×4.
STEP 8
Slide 7 down the grooves between 3 and 4.
STEP 9
Select 2×1, A×2,K×4,T×1,X×2 and W×1.
Insert K×4, X×2andW×1 into 2.
Put the A×2 and T into the hole of 2.
STEP 10
Select A(×2), L(×4), N(×4), Q(×1), R(×1),S(×2),W(×1),2(×1), 6(×1).
Install 2(×1) into 3 and 4 with L(×4).Insert N(×2) into two holes of 3.Repeat
the steps for 4.Insert the top of 6 into 2 with S(×1) and install the bottom
of 6 into 5 with the other S(×1). Insert the A(×2) into of W(×1) into 6.
Install the Q and R into the hole of 6.
STEP 11
Select A(×18), OCL(×3), OCR(×3), 10(×1), and 11(×1). Insert the OCL×3 into 10
with A×9.
Insert the OCR×3 into 11 with A×9.
STEP 12
Select J(×4), L(×4), E(×4), M(×4), V(×4) and 8(×1). Insert J(×4)and L(×4)
into top side of 8.Install the E(×4), M(×4), and V(×4) into bottom side of 8.
STEP 13
Select 10(×1), 11(×1) and P(×4). Align the holes on the side of 10 adn 11
to the posi-tion of L(×4).Insert 8 into 10 and 11 with P×4.
STEP 14
Slide 12 down the grooves between 10 and 11.
STEP 15
Install 9 into 10 and 11 with K(×4),L(×4) and N(×4).
STEP 16
Install 23 into 4 and 10 with K(×4),N(×4).
STEP 17
Select E(×8),J(×8),U(×1).Insert 1 into 2 and 9 with E(×8) and J(×8). Put U
onto the hole of 1.
STEP 18
Select 14×1, 15×1,16×1,and P×4.Insert 15×1 into one side of 14×1 with P×2.
Repeat for 16 into 14.
STEP 19
Slide 13 along the grooves between 15 and 16.Insert 17 into 15 and 16 with
K×4 and N×4. Install the R and Q into the hole of 17.
STEP 20
Insert the ODR into 16 with A×3.
Insert the ODL into 15 with A×3.
STEP 21
Select 18×1, 18×1,20×1,and P×4.Insert 19×1 into one side of 18×1 with P×2.
Repeat for 20 into 18.
STEP 22
Slide 13 along the grooves between 19 and 20.Insert 21 into 19 and 20 with K×4
and N×4. Install the R and Q into the hole of 21.
STEP 23
Insert the ODR into 20 with A×3.
Insert the ODL into 19 with A×3.
Repeat the same steps for the other drawer.
STEP 24
Put the three drawers in the cabinet of desk.
STEP 25
Access the power panel by opening the top cover in the desk and reaching in to
plug in devices.
ASSEMBLY COMPLETE
CONGRATULATIONS, YOUR NAOMI HOME ELSY CONTEMPORARY TWO-TONE DESK IS COMPLETE!
Product Packaging Information
Model #:
Color:
Shipment Ref. #:
Date:
www.NaomiHome.com MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>