NAOMI HOME nohx1078_3 Black Futon Sofa Bed Installation Guide
- May 15, 2024
- NAOMI HOME
Table of Contents
Futon Sofa Bed with Cup Holders
Installation Guide
USE AND MAINTENANCE
- Use on level surfaces only
- Because this product needs assembly, it is prone to working itself loose from time to time depending on the use. Please take the time t check that all connections are still tight and working properly for safet
- Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.
PART LIST
HARDWARE
Assembly Instructions
-
Select and lay flat 1 assembly and turn over upside down.
Select 4 x2 and insert leg post into back hole in futon.
Turn clockwise to hand tighten.
-
Select 3, A Bolts x4, B Washer x 4. Insert
A Bolt into B Washer and through hole in 3 then mount 3 to part 1
Assembly. Ensure the leg orients to point outward for proper support. -
Select 2, and insert arm pads into position.
Pull down center console with cup holders.
Note: To sleep – pull backrest forward until it clicks to release and then push backward to lay flat.
To Recline: Lay flat to sleep, then pull up into desired recline position.
Congratulations! Setup of
your new
Futon is Complete!
If you need help or have damaged or missing parts, contact customer service
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>