MARMITEK Smart Wi-Fi Camera User Manual
- June 7, 2024
- MARMITEK
Table of Contents
MARMITEK Smart Wi-Fi Camera User Manual
Package content
1 x security camera indoor
1 x Micro USB cable white, 95 cm
1 x Adhesive tape, 33mm round
1 x Pin 1 x Switching adapter
1 x Quick install guide
http://www.marmitek.com/media/qr/Smart_me_ug_store_aa_01.html
http://www.marmitek.com/media/qr/vme_ug_ma_aa_01.html
Safety Instructions
Please read these instructions thoroughly before you use the device and keep them for future reference.
- Only for indoor use.
- Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
- This product is not a toy. Keep out of reach of children.
- Connect the adapter to the mains only after you have verified that the line voltage corresponds to the value specified on the type plates.
- Disconnect the AC/DC power adapter from the mains when this device is not in use for prolonged time.
- Never open the product: the device may contain parts with deadly voltage.
- Repairs or service should only be performed by qualified personnel.
Requirements
This product requires a stable working Wi-Fi network (username/ password) connected to the internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from the Apple app store or the Google Play store. Launch the Smart me app after installation is completed. Follow the instructions and register for a new account.
Installation of the View ME
- Power the Smart camera by connecting the adapter into the electrical wall socket.
- The indicator light should start flashing quickly and a tone is heard. If it’s not flashing, hold the button for 5-6 seconds until it begins flashing.
- Launch the Smart me app from your smart phone or tablet.
- Click on the + (upper right corner) to add a new device, confirm if the light bulb flashes quickly and
- Scan the QR code by holding the code 20cm in front of the camera lens and confirm when a beep is heard from the camera.
- Press Help button during installation for more information or when installation fails
Notes for using the product
- After the installation is completed you can control and configure the camera by using the app.
- Check our website www.marmitek.com for more details and how to use the Smart me products.
Technical specifications
Video resolution —1080p
Detection angle — 115 degrees
Compression — H.264
Bandwidth — 32kbps ~ 2Mbps
Night — vision infrared up to 10m
Audio — Two-way
SD card slot — up to 128Gb, not included
Wireless technology — Wi-Fi 2.4GHz
Power — 220-240 VAC 50/60 Hz 5 VDC micro USB adapter
Power consumption max — 2.5 Watt
Stand power — < 0.5 Watt
Dimensions — 60 x 78 mm
Declaration of Conformity
Hereby, Marmitek BV, declares that the View ME is in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of- conformity/
More detailed user guide and instructions are available on our website at www.marmitek.com
20728/20191106 | View ME™
all rights reserved © MARMITEK
stay connected
References
- Marmitek | Specialist for 25 years | Wireless HDMI & audio and Smart Home
- Marmitek | Al 25 jaar specialist in slimme oplossingen
- Declarations of Conformity | Marmitek
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>