vtech Glitter Me Kitty User Guide

: June 7, 2024
: vtech

**vtech Glitter Me Kitty User Guide

**

INTRODUCTION

Add some sparkle to your day with your new bestfriend Glitter Me Kitty by VTech®! When this super cute, super cuddly meow-gical kitty is happy or when you stroke her head, she will move her paw and place a glitter stamp on your hand to show you she loves you. Is she hungry, sleepy or itchy? Colour- changing stripes on her head will show you how she’s feeling. Discover what she’s saying by pressing her tummy to translate her meows into words! Respond to her needs by scratching her head or stroking her on the back until she falls asleep. You can even feed her with her very own bottle.

PRODUCT OVERVIEW

INCLUDED IN THE PACKAGE

Glitter Me Kitty
1 Bottle
1 Ink pad
1 Parent’s Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE
Please save this Parent’s Guide as it contains important information

GETTING STARTED

Battery Removal and Installation

Make sure the unit is turned Off.
Find the battery cover located on the bottom of the kitten, use a screwdriver to loosen the screw and open the batter cover.
Remove old batteries by pulling up on one end of each battery.
Install 3 new AA batteries following the diagram inside the battery box.
Replace the battery cover and tighten the screw to secure

WARNING:

Adult assembly required for battery installation.
Keep batteries out of reach of children.

BATTERY INFORMATION

IMPORTANT

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeabl batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES

Remove rechargeable batteries from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

Removing the Packaging Locks:

Rotate the packaging locks anticlockwise 90 degrees.
Pull out the packaging locks and discard.

To Begin Playing With Glitter Me Kitty
When you play with Glitter Me Kitty for the first time, slide the switch from the High Volume position to the Low Volume position and wait for a few seconds to exit Try-Me mode. You will hear three beeping sounds when you have exited Try-Me mode. You can then press any button to activate the unit and start playing.

WARNING

NOT for children under 4 years old. KEEP OUT OF REACH of very young children.
Follow all instructions and use under adult supervision.
Not to be eaten. Use only as directed.FOR EXTERNAL USE ONLY. DO NOT USE on face. KEEP AWAY from eyes or lips. Rinse eyes with water immediately if product comes into contact with them.
DISCONTINUE USE if rash develops.
DO NOT USE if the packaging is already opened or tampered with.

Glitter ink is NON-TOXIC. Conforms to ASTM D4236 and all FDA cosmetic safety regulations. It is laboratory tested and safe for use as recommended. As with all cosmetics, some individual skin types may experience minor skin irritation. If this occurs, discontinue use, and consult a doctor if necessary.

IMPORTANT: The glitter ink is ONLY for printing on hands. DO NOT USE on clothing and other articles of daily use. AVOID contact with fabrics, carpets, and upholstery. In case of contact with clothing, rinse with soap and water immediately.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.

The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the market after 13th August, 2005.

Help protect the environment by disposing of your product or batteries responsibly.

VTech® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a small electricals collection point so all its materials can be recycled.

In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.

How to Install the Ink Pad

With the Glitter Me Kitty, adult assembly is required.

Please note that Glitter Me Kitty comes with a pink decorative cover on her paw. This cover will need to be removed and the ink pad installed so that the Glitter Me Kitty can stamp hands.

Pull the decorative cover off the kitten’s paw.
Remove the ink pad from the aluminum packaging and remove the plastic ink cover from the ink pad.
Put the ink pad on the kitten’s paw, with the tip of the heart pointed toward the paw.
Press down firmly on both sides of the ink pad. You will hear it click into place when inserted properly. The ink pad is now ready to use.
Put the decorative cover and plastic ink cover together by aligning their latches, and store them on the bottom of the kitten, with the cover’s latch facing the Off/Low/ High Volume Switch and decorative cover facing in.
When not using the ink pad for an extended period, we suggest taking it out, putting the ink cover back on and storing it in a cool, dry location.
Clean the stamp and the inside of the kitten’s paw with a damp cloth, then place the decorative cover back on the top of the kitten’s paw for protection.
The ink washes off with soap and water.

WARNING

The ink pad is ONLY for stamping paw prints onto your hand. It is not intended for any other use.

Please read all of the safety warnings in this Parent’s Guide before use.

NOTE: Before using the ink pad, please test a small amount of ink on the inside of your wrist to ensure there is no reaction or skin sensitivity.

PRODUCT FEATURES

Off/Low/High Volume Switch
This switch is located on the bottom of the unit. To turn the unit On, slide the switch from Off to the Low Volume or High Volume position. To turn the unit Off, slide the switch to Off position.
Light Up Head Button
Press the Head Button for three responses:
- Press and hold for 2 seconds and the kitten will move her paw to give you a stamp.
- Press once to hear cute kitten sounds or listen for hints on how to respond to what the kitten needs.
- Press twice to hear the kitten sing songs. Also, keep an eye on the colours of the lights on the kitten’s head, as they indicate the kitten’s mood.
Tummy Button
- After pressing the Back Button, Head Button or Mouth Button, press the Tummy Button to hear what the kitten said.
- When the kitten meows, press the Tummy Button to translate current purrs or meows into human voice.
- If you want to hear different voice lines, you can press the Back Button, Head Button or Mouth Button again and then press the Tummy Button.
Back Button
- Press to hear different kitten sounds.
- Quickly press two times to hear the kitten sing playful songs.
- When the kitten is itchy, this and the Head Button are great spots to scratch!
Mouth Button and Bottle
- Press to hear different kitten sounds.
- Press three times or long press for several seconds to feed your kitten when she feels hungry.
- Use the Bottle to feed your kitten anytime or when your kitten feels hungry. Be careful not to feed her too much, or she will get the hiccups or need to burp.
Automatic Shut-Off
To preserve battery life, the Glitter Me Kitty will shut off automatically after several minutes without input. The unit can be turned on again by sliding the Off/Low/High Volume Switch or by pressing any button. The unit will also automatically turn off when the batteries are very low.

ACTIVITIES

Glitter Me Kitty has five different modes of play. When you play with her for a while or after she is left alone for a short period of time, she will change her mode of play. The lights on the kitten’s head represent different feelings:

Head Light Colour	What It Means	What To Do
Yellow	Happy.	Continue to play with your kitten.
Red	Loving.	Continue to take care of your kitten.
Purple	Questioning. The kitten wonders if your action is correct.	Try

another action to make the kitten happy.
Orange| Excited. The kitten is excited and ready to give you a stamp.| Put your hand under the kitten’s paw to get a glitter stamp.
Pink| Ecstatic. The kitten feels ecstatic when she stamps your hand.| Enjoy the stamp that the kitten gave you.
Green, Slow Flashes| Sleepy.| Pat the kitten’s back or head 3 times to make her sleep.
Green & Blue| Hungry.| Use the bottle to feed your kitten.
Orange & Blue| Has the hiccups.| Pat the kitten’s back 3 times or press her back for 3 seconds.
Blue, Slow Flashes| Bored.| Play with the kitten by patting her head or back, or feed her with the bottle.
Purple & Blue| Itchy.| Find out if the kitten’s back or head is itchy and pat that spot 3 times to make the kitten comfortable.
Rainbow| Show time. The kitten wants to sing.| Your kitten will sing a song. Press the Tummy Button to alternate between meows and real words.

Stamp Feature

Put your hand under the kitten’s stamping paw as shown in the picture. Try to keep your hand flat while the kitten stamps it.
Press and hold the button on the kitten’s head for a few seconds. A magical light will show on the kitten’s head as it stamps.
When the kitten starts to stamp, you can use your hand to hold the kitten’s head to prevent the kitten from moving or shifting. This will help the stamp transfer more thoroughly.
If the stamp does not seem to be transferring, an adult can remove the stamp pad and use a spoon or other smooth object to spread the ink around the ink pad.

Ink Pad For Hand Ingredients

Glycerin, Aqua(Water), Synthetic Fluorphlogopite, Sorbitol, Titanium Dioxide, Polysorbate 20, Caprylyl Glycol, Phenoxyethanol, Hydroxyacetophenone, Acacia Senegal Gum, Xanthan Gum, Tin Oxide, Triethanolamine, Benzoic Acid, Dehydroacetic Acid.
May Contain: CI 42090, CI 73360, CI 17200, CI 45410, CI 15850

SONG LYRICS

Best Day Ever

We spend the best day running,
We got the best day coming,
Best friends to the end, can’t you see I love you.
Won’t you play with me?
Oh, won’t you stay with me?
We are the best, we are the best friends ever!

Hanging With My Friends

Hangin’ with my friends and dancin’ all the day away,
Hangin’ with my friends, it’s all glitter and lights!
Hear us singin’, dancin’ all the day away,
We’ll be laughin’ all through the night!

Glitter and Sunshine

Pounce and sneak and run away,
Kitties can play all through the day.
We’ve got a lot of fun things we can do,
Glitter and sunshine are waiting for you.

The Soft Kitten Purrs

Fast asleep, the soft kitten purrs,
Dream of people stroking your fur.
Your leg twitches here, your lip curls up so,
You’ve caught that dream mouse on your own.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries and the ink pad if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

PRODUCT WARRANTY/ CONSUMER GUARANTEES

UK Customers:

Read our complete warranty policy online at vtech.co.uk/warranty.

Australian Customers:

VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.