vtech Learn & Grow Farm User Guide

: June 7, 2024
: vtech

Table of Contents

INTRODUCTION
INCLUDED IN THE PACKAGE
INSTRUCTIONS
LABEL APPLICATION
ASSEMBLY INSTRUCTIONS
PRODUCT FEATURES
ACTIVITIES
MELODIES
SONG LYRICS
CARE & MAINTENANCE
TROUBLESHOOTING
CONSUMER SERVICES
Product Warranty/ Consumer Guarantees
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vtech Learn & Grow Farm User Guide

INTRODUCTION

Thank you for purchasing the Learn & Grow Farm! Have fun with farming! Place any of the animals on one of the two Talking Points to hear phrases and sounds. Three light up buttons introduce time concepts and daily routines. Set up your farm with a stable, tractor, animals and more. Let your imagination grow!

INCLUDED IN THE PACKAGE

One silo back

One silo front

One silo base

One stable roof

One stable wall

One stable base

One windmill

One windmill bracket

One windmill base

One field piece

One barn roof

One barn

One weather vane

One butterfly

slider One mouse

One barn base

Two gates

One seesaw seat

One seesaw base

Four fences

One cart

One tractor

One farmer

One electronic panel

One bale of hay

One bundle of wood

Four farm animals (Cow, Donkey, Chicken and Cat)

Label sheet
Parent’s Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety

NOTE
Please save this Parent’s Guide as it contains important information.

INSTRUCTIONS

BATTERY REMOVAL AND INSTALLATION

Make sure the unit is turned OFF.
Locate the battery cover on the back of the unit. Use a screwdriver to loosen the screw. Then remove the cover.
If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery cover and tighten the screw to secure.

WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

Remove rechargeable batteries from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

Disposal of batteries and product

Disposal The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.

The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect the environment by disposing of your product or batteries responsibly
VTech® cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a small electrical collection point so all its aterials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with you local council for kerbside collections.

LABEL APPLICATION

Please securely stick the labels to the play set as indicated on the following pages:

ASSEMBLY INSTRUCTIONS

With the Learn & Grow Farm, safety comes first. To ensure your child’s safety, adult assembly is required.

SMALL COMPONENT ASSEMBLY

Insert into B , then C as shown. You will hear a click sound to indicate the pieces are secure.
Insert E into D , then insert into F . You will hear a click sound to indicate the pieces are secure. Please note that they cannot be detached once connected.
Insert G into H , then insert into I . You will hear a click sound to indicate the pieces are secure. Please note they cannot be detached once connected. Lastly, join J to I as shown.
First, attach K to L . Second, insert M , N and O into L as shown. Then, insert L into P . You will hear a click sound to indicate the base is secure. Please note they cannot be detached once connected. Lastly, attach the two Q pieces to L as shown.
Finally, assemble the play pieces. Insert R into S . Connect the T pieces to each other. Attach the U to V as shown
Join the assembled Silo, Barn, Stable and Windmill together as shown.

Once you’ve completed the above steps, you are ready to play! Refer to the product image on the cover page of the manual for one way to set up the Learn & Grow Farm.

PRODUCT FEATURES

On/Off/Volume Selector
To turn the unit On, slide the On/ Off/ Volume Selector to either volume setting. You will hear a song, a phrase and a sound effect. To turn the unit Off, slide the On/ Off/Volume Selector to the Off position.
Automatic Shut-Off
To preserve battery life, the Learn & Grow Farm will automatically turn Off after approximately 40 seconds without input. The unit can be turned on again by pressing any button.

NOTE
If the unit powers down or if the light fades out during play, please install a new set of batteries.

ACTIVITIES

Electronic Panel
Insert the Electronic Panel into the Barn to enter Play Time mode. Remove the Electronic Panel from the Barn to enter Farm Time mode. To turn the Electronic Panel into a shower, flip it 90 degrees. Pull the Shower Lever to hear fun sound effects and give the Farm Animals a pretend shower.
Light up Button s
Press the Light up Buttons to learn time concept and colours, and hear sing- along songs and melodies. The lights will flash with sounds.
Talking Point Circle
Place one of the Farm Animals or the Farmer on the Talking Point Circle to hear the Farmer say friendly phrases. Place a figure on either Talking Point to hear even more unique phrases. The lights will flash with the sounds.
Talking Point Rectangle
Place one of the Farm Animals or the Farmer on the Talking Point Rectangle. The Talking Point will recognize the animals and teach animals names, sounds, and facts. Place a figure on either Talking Point to hear even more unique phrases. The lights will flash with the sounds.

MELODIES

Bingo
Red River Valley
I Want to Go Back to Michigan, Down on the Farm
Oats, Peas, Beans, and Barley Grow
Old MacDonald Had a Farm
Peas Porridge Hot
Sweet and Low
Hey Diddle, Diddle
Good Morning, Merry Sunshine
Frère Jacques
Twinkle, Twinkle, Little Star
Brahms’ Lullaby

SONG LYRICS

Song 1
On the farm every day is busy There’s always something to do

Song 2
There’s lots of room to work and play, Here on our farm each day

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit sit for a few minutes, then replace the batteries.
Turn the unit On. The unit should now be ready to play with again.
If the unit is not working properly, install a brand new set of batteries.
If the problem persists, please contact our Consumer Services Department, and a service representative will be happy to help you.

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

Product Warranty/ Consumer Guarantees

UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty. Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au