Cel-Fi SOLO RED 0.5W ERCES Public Safety BDA Instructions

: June 3, 2024
: CEL-FI

Table of Contents

Cel-Fi SOLO RED 0.5W ERCES Public Safety BDA
PRODUCT INFORMATION
Safety Precautions
Warranty
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cel-Fi SOLO RED 0.5W ERCES Public Safety BDA

PRODUCT INFORMATION

Do not call your service provider until you have read the User Manual. If you need help, visit:www.cel-fi.com/support/

Safety Precautions

When installing the equipment, all the requirements of the manufacturer and the referenced standards must be met.
There are no user-serviceable parts inside.

Caution

This device may be operated ONLY in a fixed location for in-building use. Home/personal use is prohibited.
External Antenna: Only the antennas listed in the Antenna Kitting section of the user manual are allowed to be used with this device. Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP and/or indoor-only restrictions is prohibited.

Warranty

Nextivity Inc provides a limited warranty for its products. For details, please refer to http://cel-fi.com/war-ranty

Limitation of Liability
In no event shall Nextivity, nor its directors, employees, agents, suppliers or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement (i) for any lost profit, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or (ii) for any direct damages in excess of (in the aggregate) the fees actually received by Nextivity from End User with respect to the Products actually purchased and paid for. See www.cel-fi.com for list of patents covering this product.

FCC
Part 90 Signal Boosters. THIS IS A 90.219 CLASS A DEVICE

WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC License to operate this device. You MUST register Part 90 Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.

WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Statement

NOTE: For a Class A digital device or peripheral, the instructions furnished to the user shall include the following or similar statement, placed in a prominent location in the text of the manual: NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In order to comply with FCC RF Exposure requirements:

The donor antenna must be installed to provide at least 65 cm separation from the human body at all times.
The server antenna must be installed to provide at least 20 cm separation from the human body at all times.

ISED STATEMENT
WARNING: This is NOT a CONSUMER device. It is designed for installation by an installer approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED licensee to operate this device. This device may operate in a fixed location only, for in-building use. In order to comply with ISED RF Exposure requirements:

The donor antenna must be installed to provide at least 65 cm separation from the human body at all times.
The server antenna must be installed to provide at least 20 cm separation from the human body at all times.

The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (A)/NMB-3(A)
Compliance Contact
In the event of a regulatory compliance issues, please contact Nextivity Inc. directly. Contact information is available at www.nextivityinc.com.

Patents
This product is covered by Nextivity, Inc., US patents and patents pending. Please refer to cel-fi.com for details.

Copyright
Copyright © 2022 by Nextivity, Inc. All rights reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with prior written permission of Nextivity. Designed by Nextivity in California.

Trademark
Cel-Fi and the Nextivity logo are trademarks of Nextivity, Inc. If you need help, visit:www.cel-fi.com/support.

U.S. Headquarters: Nextivity Inc.