Cel-Fi GO G41-JE-003 Stationary User Guide

Cel-Fi GO G41-JE-003 Stationary User Guide

Mounting Instructions

NOTE: This package comes equipped with screws and drywall anchors for mounting in standard drywall. Before you install the mounts, make sure there are no wires or other objects, or metal plates, behind the drywall that may interfere with the inserts, screws, mount, or mounted units.

1. Determine Cel-Fi GO G41 location. (Refer to Installation section).
   Determine mounting hole locations.
   

2. In each marked spot, use a 3/16” drill bit to drill guide holes for the anchors. Install anchors (Drywall).
   

Antenna Options

Review the latest authorized antennas at:
www.cel-fi.com/antennas

MODEL NUMBERS

1

| Downlink| 20 (dBm)| 25.1 (dBm)
Uplink| 22 (dBm)| 27.1 (dBm)

3

| Downlink| 20 (dBm)| 25.1 (dBm)
Uplink| 22 (dBm)| 27.1 (dBm)

5

| Downlink| 20 (dBm)| 25.4 (dBm)
Uplink| 20 (dBm)| 25.4 (dBm)

7

| Downlink| 20 (dBm)| 25.4 (dBm)
Uplink| 22 (dBm)| 27.4 (dBm)

8

| Downlink| 20 (dBm)| 25.1 (dBm)
Uplink| 20 (dBm)| 25.1 (dBm)

20

| Downlink| 20 (dBm)| 25.1 (dBm)
Uplink| 20 (dBm)| 25.1 (dBm)

28L

| Downlink| 20 (dBm)| 25.1 (dBm)
Uplink| 20 (dBm)| 25.1 (dBm)

28U

| Downlink| 20 (dBm)| 25.1 (dBm)
Uplink| 20 (dBm)| 25.1 (dBm)

40

| Downlink| 20 (dBm)| 25.4 (dBm)
Uplink| 22 (dBm)| 25.4 (dBm)
Model Number| Bands
---|---
G41–JE| S u 1, p 3 p , 5 o , r 7 t , e 8 d , 28L, 40
G41–9E| 1, 3, 7, 8, 20
G41–QE| 1, 3, 5, 7, 28L
G41–NE| 1, 3, 5, 7, 8, 28U, 40

Quick Installation

The Cel-Fi GO G41 must be kept indoors and in a dry, cool, well ventilated area.

1. Define Coverage Problem
   Determine where coverage is needed. This is where the server antenna should be placed.
   
   

2. Place Main Unit
   Place the main unit as far away from the server antenna as the cable will allow, close to a window where there is coverage.
   
   Ideally it should be placed with at least one wall between the donor and server antennas. If the patch antenna cable is too short, it may be extended.

3. Attach Server and Donor Antennas
   Attach the donor antenna and server antenna to the main unit.
   
   Attach the donor antenna and server antenna to the main unit.
   
   Keep donor and server antenna separated/isolated from each other as far away as possible for best performance.

4. Plug In Cel-Fi GO G41
   
   

5. Cel-Fi WAVE App
   The Cel-Fi WAVE app can be used to optimize the Cel-Fi GO G41 performance.
   The antenna locations can be adjusted or relocated and system performance quickly assessed via the Cel-Fi WAVE app.
   
   
   

Advanced Install

For best results, separate the donor and server antenna(s) as much as possible. Antenna separation (isolation) can be achieved with either physical distance or by having materials (like a wall) between the antennas.
Make sure any cables, splitters, and antennas used in the system are properly matched. (Cel-Fi GO G41 is rated for 50Ω)

Recommend

• > 20dB port-to-port isolation for any splitter
• External directional antenna #A62-V44-200 will provide best overall system performance
• Wideband panel antenna #A52-V32-100 may be used as an effective indoor donor antenna

Downlink power should be:

• > 0dBm to use a two-way splitter
• > 3dBm to use a four-way splitter

External Antenna

Splitting Server Antenna

Multi-Story

copyright © 2021 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity Inc in California.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>