CEL-FI QUATRA 4000/4000i Enterprise Cellular Coverage User Manual
- June 9, 2024
- CEL-FI
Table of Contents
CEL-FI QUATRA 4000/4000i Enterprise Cellular Coverage
Multi-Carrier Hybrid Active DAS for 5G/4G/3G Voice and Data
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones
continue to plague employees and visitors in enterprise and middle prise
buildings. To solve that problem, Cel-Fi QUATRA 4000 is an affordable, all-
digital active DAS hybrid solution that provides uniform, high-quality
cellular signal throughout any building. This industry-leading system is also
carrier approved and guaranteed network safe. The system utilizes Cat5e
cabling for RF and Power over Ethernet, with no signal attenuation to the
Coverage Unit (CU) embedded service antennas. In addition to being the most
powerful solution on the market, QUATRA is cost-effective and designed to be
installed within days (compared to months typical of other solutions). Perfect
for creating the ideal system, Cel-Fi QUATRA 4000 is scalable to fit buildings
of all sizes. Depending on the environment, size, and space, the system
utilizes one or multiple Network Units (NUs), with each one providing power
and distributing signal to up to six CUs. Together, the NUs and CUs support
four operators.
IntelliBoost® Chipset
The Nextivity IntelliBoost® baseband processor is the first six-core processor
designed specifically to optimize the indoor transmission and reception of
5G/4G/3G wireless signals. With advanced filtering, equalization and echo-
cancellation techniques, Nextivity has developed an architecture that delivers
unprecedented in-building data rates and pervasive 5G/4G/3G connectivity. The
IntelliBoost® processor ensures Cel-Fi products never negatively impact the
macro network and provide maximum coverage.
Highest Coverage Gain:
Up to 100 dB Max Gain for 5G/4G/3G Voice and Data
All Digital:
Cat5e PoE/RFoE Solution
Scalable:
Up to 125,000 ft2 Coverage per Network Unit
Multi Mode:
Off-Air or Supercell Mode with Fiber Expansion
Network Safe:
Carrier Approved with No Noise Guarantee
Cel-Fi WAVE Platform:
Set Up, Remote Monitoring, and Management
CEL-FI WAVE COMPATIBILITY
Providing control and optimization insight, the Cel-Fi WAVE Portal is a web- based platform that enables an operator or integra-tor to remotely monitor equipment and system KPI’s, such as channel configurations, RSRP, RSRQ, SINR, and system gains.
NETWORK SAFE
All Cel-Fi systems employ self-organizing edge intelligence to constantly
monitor power levels and donor-to-server antenna RF feedback with active echo
cancella-tion. This automatically ensures maxi-mum coverage power without
interfering with operator networks and other local radio systems.
OFF-AIR CONFIGURATION
Cel-Fi QUATRA systems are capable of retransmitting donor signals from outdoor directional antennas to indoor locations. Unlike typical BDA amplifiers, each operator channel is individually processed and power controlled to achieve full coverage power. This eliminates channel-to-channel coverage power variations due to differences in power of donor signals.
MODEL NUMBERS:
QUATRA 4000 (Part 20)
NU: Q44-1234CNU CU:Q41-5ECU
Bands: 2/4/5/12/13/25| QUATRA 4000i (Part 90)
NU: I44-1234CNU CU: I41-5ECU
Bands: 2/4/5/12/13/25/26/30/41/71| QUATRA 4000/4000i Fiber Hub Unit:
Q40-1234FNU
SUPERCELL® CONFIGURATION
A Supercell is comprised of a Cel-Fi QUATRA system connected to a small cell. Multiple QUATRA systems can be connected to a single small cell, or multiple small cells, to form a Supercell. A Supercell with QUATRA is more efficient than multiple small cells, and the CUs of a Cel-Fi QUATRA system connected to a Supercell do not interfere with one another.
FIBER EXTENSION
Expanding the capabilities of Cel-Fi QUATRA systems, the Cel-Fi QUATRA Fiber
Range Extender (QFRE) increases the distance between the Network Unit and
Coverage Unit up to 1.24 miles (2.0 km). This solution is ideal for high-rise
structures, long distances, or multi-building facilities. QUATRA 4000 is also
compatible with the Cel-Fi QUATRA 4000 Fiber Hub, which offers the same
distance flexibility as the QFRE and allows a single NU to support up to 12
CUs.
Nextivity Inc.
16550 West Bernardo Drive, Bldg. 5, Suite 550, San Diego, CA 92127
www.cel-fi.com