CEL-FI G32-2 GO+ Marine Kit User Guide
- October 30, 2023
- CEL-FI
Table of Contents
Cel-Fi GO+ Marine Kit
Quick Start Guide
Smart Signal Booster™
G32-2 GO+ Marine Kit
Basic Functionality
The Cel-Fi GO+ Smart Signal Booster Smart Signal Booster is designed to
improve cellular coverage in a building, remote area, or vehicle. Cel-Fi GO+
connects to an external Donor Antenna to draw in a cellular signal from the
macro network, and redistribute signal via the Server Antenna.
Cel-Fi WAVE App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems. The app’s
dashboard shows the system “Boost” value that is a numeric representation
mapped to the amount of signal gain the system is providing. Higher is better,
with nine (9) being the highest value. Cel-Fi WAVE functions as the
registration and management application that allows users to setup antenna,
modes, and carriers, and is available through either the Google Play Store or
Apple App Store.
Cel-Fi GO+ is configured to automatically select the best cellular band to boost.
- Configure the system’s preferences using the Cel-Fi WAVE app.
- Change carrier
- Change mode (Stationary or Mobile)
NEMA 4 Rating
The Cel-Fi GO+ is NEMA 4 rated, and can be used both indoors and outdoors. The
NEMA 4 rating provides the following advantages:
- A degree of protection against ingress of solid foreign objects (falling dirt and windblown dust)
- A degree of protection from the ingress of water (rain, sleet, snow, splashing water, and hose directed water)
- Equipment will be undamaged by the external formation of ice on the enclosure
Point & Optimize Antenna
For mobile (non-stationary) applications, Mobile Mode should be selected in the Cel-Fi WAVE App.
Install Tips for Donor Antenna
- Install antenna at least 12 inches from any other antennas for best performance
- Antenna should be free of obstructions
- Antenna should be away from windows (including sunroof or other openings)
- Install 8 inches away from any people
- For best performance make sure there is 50 cm of metal around the base of the antenna
Install Tips for Server Antenna
- For best results, install Donor and Server Antennas such that there is substantial material between the antennas. This will create isolation and allow the system to perform at higher gain without oscillation or feedback
- Keep Donor and Service Antennas separated/isolated from each other for best performance
- Do not use cable splitters for Donor Antennas
- If using directional antennas, do not point them at each other
- Avoid pointing the Donor antenna across the coverage field, if possible
- Follow the installation instructions for your chosen antennas
- The power supply is not NEMA 4 rated
Tips for Mobile Mounting:
- Location should have airflow (for cooling) and be secure from contact with external objects
- Make sure the unit is within cable range of the 12V power supply on your vehicle
Cel-Fi GO+ Smart Signal Booster Installation
Before You Begin
Cel-Fi GO+ Smart Signal Booster has a Donor Antenna Port and a Server Antenna
Port. They are marked on the device with icons (see illustration). It is
critical that the Donor and Server antennas are connected to the correct port.
IMPORTANT: Best to make sure all cable lengths support the intended
mounting location BEFORE permanent mounting.
- Install Donor Antenna
- Install Server Antenna
- Mount Cel-Fi GO+
- Connect Donor & Server Antennas to the Cel-Fi GO+
- An AC or 12V Power Source
- Activate & Setup with Cel-Fi WAVE
Change Between Modes and Carriers
IMPORTANT: Cel-Fi GO+ Smart Signal Booster ships with a mode and operator
selected, but some versions can be changed via Cel-Fi WAVE. It is critical
that the booster’s mode match the application, for both regulatory
andperformance reasons. If the booster is in motion, it should be set to
Mobile mode. If the booster is stationary, it should be set to Stationary
mode.
Change Modes Between Mobile (65/70 dB) or Stationary (100 dB)
- Open Cel-Fi WAVE application
- Go to settings tab
- Select Booster Setting
- Switch between mobile and stationary
Change Carrier /Operator
- Open Cel-Fi WAVE application
- Go to settings tab
- Select Operator
- Switch between mobile network operators
Specifications:
Frequency Support
Multiple variations of the product are available with different frequency
support.
Model: G32-2/4/5/12/13
BAND | NAME | DOWNLINK | UPLINK |
---|---|---|---|
2 | 1900 PCS | 1930 | 1990 |
4 | AWS–1 | 2110 | 2155 |
5 | 850 | 869 | 894 |
12 | 700 a | 729 | 746 |
13 | 700 c | 746 | 756 |
Gain
Up to 100 dB system gain
Model: G32-1/3/5/7/8/20
BAND | NAME | DOWNLINK | UPLINK |
---|---|---|---|
1 | 2100 | 2110 | 2170 |
3 | 1800+ | 1805 | 1880 |
5 | 850 | 869 | 894 |
7 | 2600 | 2620 | 2690 |
8 | 900 | 925 | 960 |
20 | 800 DD | 791 | 821 |
Gain
Up to 100 dB system gain
Dimensions
LENGTH | WIDTH | HEIGHT | WEIGHT |
---|---|---|---|
272.5 mm | 96.5 mm | 43.5 mm | 850 g |
Power (max)
DOWNLINK TX | UPLINK TX |
---|---|
10 dBm/5 MHz (16 dBm per band) | 24 dBm per band |
Bluetooth (LE Ver 4.2)
FREQUENCY | POWER |
---|---|
2042 – 2480 MHz | 0 dBm |
Environmental
Operating Temp: 0 – 65°C
Relative Humidity: 95%
Antenna Connectors
SMA-Female
Certifications
(All variants)
3GPP TS 25.143 Rel.10 | BQB (Bluetooth) |
---|---|
3GPP TS 36.143 Rel.10 | NEMA-4 |
RoHS 2
(G32-2/4/5/12/13 variants only)
FCC | CSA C22.2#62368-1 |
---|---|
ISED | UL 50E, UL 60950-22 |
UL 62368-1:2014 | CSA C22.2#60950-22 |
(G32-1/3/5/7/8/20 variants only)
IEC 62368-1:2014 | EN 301 908-1 v11.1.1 |
---|---|
EN 301 489-1 v2.1.1 | EN 301 908 v11.1.2 |
EN 301 489-17 v3.1.1 | EN 301 908 v11.1.2 |
EN 301 489-50 v2.2.0 | EN 300 328 v2.1.1 |
EN 62311 (2008)
Regulation (EC) 1275/2008 (Standby and Off mode)
Regulation (EC) 278/2009 (External Power Supply)
User Interface
Cel-Fi GO+ Smart Signal Booster features an LED on the top face to indicate the unit’s state:
LED | MEANING |
---|---|
Solid GREEN | The unit is working properly and boosting properly. |
Blinking GREEN | Unit is scanning for networks to boost. |
Blinking RED | The unit is in an error condition. Use the Cel-Fi WAVE app |
to check the error code meaning and remedy.
Solid RED| The unit has a hardware error and is not booting up normally.
NOTE: In mobile usage, it is normal for the Cel-Fi GO+ Smart Signal Booster to fluctuate between scanning and boosting. The Cel-Fi GO+ Smart Signal Booster automatically adjusts its boost behavior based on available signal.
Troubleshooting
ISSUE | MEANING | ACTION |
---|---|---|
Continual Blinking GREEN | Unit is operational, but not attaching to a network | |
to boost. | • Make sure both antennas are connected properly and are |
appropriate for the desired frequencies to boost.
• Make sure the selected operator to relay is available at your location. This
can be checked with the Cel-Fi WAVE application. If the service is not
available, it cannot be boosted.
Solid RED LED| Unit is not operational.| • Unplug and reinsert power.
• If restart has no effect, contact vendor for remedy.
Antenna and Mount Options:
Review the latest authorized antennas at www.cel-
fi.com/antennas
Cel-Fi Marine Antenna
A11-V37-100| Cel-Fi Mobile Server Antenna
A41-V30-100
---|---
|
This guide has been modified from its original form to better align with the
Cel-Fi GO+ Marine Kit.
For more information, visit: www.cel-fi.com
Cel-Fi GO+ Smart Signal Booster
www.cel-fi.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>