CEL-FI GO G31 Cellular Smart Signal Booster User Guide
- June 5, 2024
- CEL-FI
Table of Contents
CEL-FI GO G31 Cellular Smart Signal Booster
Cel-FI GO is an evolved cellular smart signal booster design that can amplify cellular signals upto 70dB. Connect a single High Gain Antenna to receive the macro-network signals, and then a single indoor Adhslve Mount Antenna where you need service, and Cel-FI GO will do the rest automatically.
Install High Gain Antenm (HGA)
Mountyour HG Antenna on the exterior of the vehicle, towards the rear, according to its design, and the type of vehicle it’s being used with. Make sure you consider the cable connection to the Cel-Fi GO unit with your location choice.
| For best peformance make there is 50cm oi metal around the base of the
antenna
---|---
Install Adhesive Mount Antenna
Install Adhestve Mount Antenna. towaras me tront. where coverage is needed. Ideally, there should be substantial material, like the metal of the roof, between the HG Antenna and the Adhesive Mount Antenna to Improve isolation.
Mount Cel-Fi Go
Find a good mounting location in your vehicie. Location should have airflow
and be secure from contact with external objects.
Make sure the unit is within cable range of the 12V power supply on your
vehicle.
Best to make sure an cable lengths support the intended mounting location BEFORE permanent mounting.
| DO NOT plug in at this time.
---|---
Connect HGA and Adhesive Mount Antenna’s to Cel-Fi Go
Plug in Cel-Fi Go and Select: Mode
Press the MODE button on the unit to select desired scanning mode. Status Indicator will blink during the setup process, and may take a few setup process, and may take a few
| (OPTIONAL: use your smartphone to select mode. Download the Cel-Fi WAVE
app, and follow the on-screen instructions)
---|---
(*Note: If Error, go to troubleshooting at cel-fi.com/support)
Tips & Tricks
- Keep Donor and Service Antennas separated/ isolated from each other for best performance
- For best performance, the cable between the Outdoor Antenna and GO unit should be as sholt as possible
- Use sealant if any connections are exposed to elements
Cel-Fi WAVE
For more Cel-Fi GO features, go to App Store or Google play and
download the mobile Cel-Fi WAVE app.
(NOTE: If you do not have a oomporible Smarrphotle. go to cel-
fi.com/wave to download the Destop app.)
Documents / Resources
| CEL-
FI GO G31 Cellular Smart Signal
Booster
[pdf] User Guide
GO G31, Cellular Smart Signal Booster, Smart Signal Booster, Signal Booster,
GO G31, Booster
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>