Tenda i9 wireless access point User Guide
- June 7, 2024
- Tenda
Table of Contents
All for better networking
i9
wireless access point
www.tendacn.com
i9
wireless access point
What It Does
I9 is a wireless access point specially designed by tenda for office, bar, coffee shop, and other indoor environments.It works in the 2.4GHz band, and the wireless rate can reach 300Mbps. Built-in 2 high gain Omni-directional MIMO antennas which give powerful WIFI signal penetration and coverage.At the same time, the device’s built-in power adjustment mode, the user can adjust the transmitted power according to the actual environment.The device adopts a standard 802.3af PoE power supply, which can guarantee the users to realize a long-distance network power supply without changing the original power network. With a simple design,it can be installed directly on the wall or the ceiling,it do not affect the original building structure. And it supports TENDA whole series wireless controller to management and deployment.
Main Features
- support 300Mbps 2*2MIMO technology,it has an internally strong and stable signal extender
- Support 12V 1A DC power supply directly,and support standard POE (802.3af) switch 100-meter cable power supply
- Support wireless controler, enterpriser wireless management
Multiple anti-interference technologies make the wireless network more
stable.
Through the built-in multiple anti-interference technologies, which can
automatically choose the optimal channel, greatly reduced the same frequency
interference and other electromagnetic interference, which improve the quality
of the wireless signal, make the wireless network is more stable.
Dual power supply mode,flexible and convenient
Compared with the single power supply mode of other products, i9 supports POE
power supply and DC power supply. You can choose according to the actual
situation, the deployment is simpler and the construction is more convenient.
Reasonable allocation of wireless resources to ensure the quality of
wireless
I9 supports hollow scheduling and limited weakness signal terminal access. It
can allocate the resources of wireless reasonably. Avoid low rate users to
preempt empty resources, increasing the overall rate of wireless networks.It
can adjust the threshold of low signal terminal access, reject the terminal
access of low signal strength, which make sure the wireless network is more
high-speed.
Support multi-ssid and VLAN binding to protect data security
It adopted a multi-ssid design to support VLAN and SSID binding. According to the connection to different SSID, it can distinguish the Internet access and data access rights which protect network data security.
Support AC unified management, easy management, and maintenance.
I9 supports centralized management of wireless controllers, automatically
detect and recognize AP without manually adding. In a wireless network, only
one wireless controller can be used to manage all AP and can monitor the
operation of the whole network in real-time.
Hardware Features
| Frequency Band | 2.400 – 2.4835 GHz |
|---|---|
| Wi-Fi Standards | 802.11b/g/n |
| PHY Data Rates | 1-300Mbps |
| Ethernet Ports | 1 10/100Base TX |
| DC Power Interface | 1 DC Power Interface |
Reset Button (login/Reset instructions)| 1
LED Indicator| 1 Sys
Power Consumption| <8W
Power Supply| 802.3af & 12V1A DC
Dimensions| 18418438mm
Software Features
| Operating Mode | AP.Client+AP |
|---|---|
| SSID Hiding | Support |
| SSID Numbers | 4 |
| WEP | 64/128 |
| WPA-PSK | AES/TKIP |
| WPA2-PSK | AES/TKIP |
| WPA | Support |
| WPA2 | Support |
| Wireless Access Control | MAC address filtering |
| Adjustable Transmission Power | Support |
| AP Isolation | Support |
| User Access Limit | Supports wireless client number constraints |
| Client Access Restrictions | Support wireless client RSSI threshold Settings |
| WMM | Support |
| VLAN and SSID Bindings | Support |
| EIRP Power(Max.) | 802.11b:18.35dBm;802.11g:19.75dBm; |
802.11n(20MHz):19.81dBm;802.11n(40MHz):19.78dBm
Switch LED| Support
Network Diagnoses| Support ping
Timing Reboot| Support
Cycle Restart| Support
Equipment Management| Web Management
Logging| System log view
Firmware Upgrade| Support from Web UI or AP Controller
Equipment Restart| Support from Web UI or AP Controller
Restore Factory Settings| Support from Web UI or AP Controller
Backup Configuration| Support
Restore Configuration| Support
Centralized Management| M3
Specifications
Working Environment
| Default Login IP | 192.168.0.254 |
|---|---|
| Default User Name | admin |
| Default Password | admin |
| Operating Temperature | -10℃~ 40℃ |
| Operating Humidity | 10%~90% non-condensing |
| Storage Temperature | -30 ℃ ~ 70 ℃ |
| Storage Humidity | 10%~90% non-condensing |
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District, Shenzhen,
Guangdong, China. 518052
Phone: (+86-755) 2765 7180
Fax: (+86-755) 2765 7178
Email: sales@tenda.com.cn
support@tenda.cn
Website: http://www.tendacn.com
Specifications are subject to change without notice.
Copyright ©2015 SHENZHEN TENDA TECHNOLOGY CO.,LTD.
All rights reserved. Tenda is the trademark of SHENZHEN TENDA TECHNOLOGY CO., LTD. All other brand names mentioned herein are the trademark or registered trademarks of their respective holders.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>