CubeLogic io DR0010 Pluggable Terminal Block LED Light Instruction Manual
- June 15, 2024
- CubeLogic io
Table of Contents
DR0010 Pluggable Terminal Block LED Light
Instruction Manual
DR0010 Pluggable Terminal Block LED Light
Features
- Bright Long-life LED in 5 Color Options
- Fits Automation Direct KN-T12 Terminal Block
- 5 – 27 V AC/DC (Class 2 Circuits Only)
- Low current demand ~10 mA
- Quick Installation (No Tools Required)
- Large Quantities Available
- Manufactured and sold in Missouri, USA
Ordering Information
Part Numbering
DR0010 – X (i.e. DR0010 -R)
X = LED color
Common part numbers listed below:
(Other configuration may be available on our website link located at bottom on
each page)
| Part Number | LED Channels | LED Pattern |
|---|---|---|
| Channel Color (+, -) | # /States | |
| DR0010-R | Red | |
| DR0010-6 | Green | |
| DR0010-B | Blue | |
| DR0010-A | Amber (Yellow) | |
| DR0010-A | White |
Wiring / Connections
Mechanical/Dimensions
Warranty / Legal Information
Cube logic Controls, LLC
These terms for product warranty governs Cube Logic Controls, LLC product
series (“Products”)
ordered by customers (“Customer”)
from Cube Logic Controls, LLC (“Manufacturer”)
Article 1 WARRANTIES AND DISCLAIMER
Manufacturer warrants that under normal use, the Products shall conform
substantially to the Specifications for a period of six (6) months from the
date of delivery from Manufacturer to Customer (the Warranty Period).
Manufacturer shall have no obligations for breach of warranty if the alleged
defect is found to have occurred as a result of a misuse (including static
discharge, improper installation, improper repair, accident, or use not in
accordance with instructions provided by Manufacturer), neglected, improper
transportation, improper storage, improper handling or has been modified,
after the risk of loss in the Products has passed to Customer, or which
Manufacturer is not capable of testing under normal test conditions.
Manufacturer’s sole obligation towards Customer for a Product failing to meet
this warranty is, at Manufacturer’s option, to replace or repair the Product
or to issue Customer a credit for the purchase price of the Product, but only
if (i) Manufacturer has received written notice of the warranty claim within
the Warranty Period, (ii) Customer has returned the Product to Manufacturer as
approved by the Manufacturer in a return material authorization form, and
(iii) Manufacturer has verified that the Product is defective. Manufacturer
warrants a replacement or repaired Product only for the unexpired term of the
warranty for the defective Product. Notwithstanding this Article 1,
Manufacturer provides all prototypes, reference designs and software “as-is”
without warranty of any kind. The express warranty granted above shall extend
directly to Customer and not Customer’s customers, agents or representatives.
Manufacturer disclaims all other warranties, whether express or implied,
including without limitation the implied warranties of merchantability,
fitness for a particular purpose, non-infringement of intellectual property
rights and Customer’s use of the Product or use of any application or circuits
described in the Specifications. Neither Customer nor any other person or
business organization is authorized to give any warranty or assume any
obligation or liability on Manufacturer’s behalf, including any of
Manufacturer’s Manufacturers, in connection with the sale, installation and/or
use of the Products. An Epidemic Failure shall be deemed to have occurred in
Manufacturer’s reasonable opinion, if: (i) more than 5 % of the aggregate of
any Products delivered to Customer during the last 3 months fails to meet any
of the Product’ warranties given in Article 1 due to a single cause (i.e.
defects due to a similar or substantially similar cause, as measured in
accordance with Manufacturer’s testing and evaluation processes); and/or (ii)
overall monthly return rate exceeds 10 % for any consecutive 6 months due to
multiple causes, which includes all reported defects of Products. In the event
of an Epidemic Failure, Manufacturer and Customer shall as soon as possible
cooperate to find root cause and appropriate countermeasures, and Manufacturer
may (i) cancel, reschedule, modify or suspend any outstanding Purchase
Order(s) to Manufacturer for the affected Products without any penalty; and
(ii) Customer may return all affected Products, and to the extent that
Customer has paid the Manufacturer for the returned Products, the Manufacturer
shall refund the price paid within thirty (30) days after the receipt of the
returned Products. This Product Warranty is intended to benefit only Customer;
no third-party beneficiaries are intended or created unless specifically
agreed otherwise in writing.
Article 2 LIMITATION OF LIABILITY
Manufacturer is not liable to Customer for any indirect, incidental,
consequential or punitive damages, for property damage, equipment re-work,
equipment damage, downtime cost, or claims from Customer’s customers such as
but not limited to roaming and/or network charges, loss of profits, revenue or
data, whether in an action in contract, tort, strict liability, or otherwise,
even if advised of the possibility of those damages. In no event shall
Manufacturer be liable for any damage, costs or expenses associated with
warranty or intellectual property infringement claims, whether for the
replacement or repair of products, including labor, installation or other
costs incurred by Customer related to the removal or replacement of any
products , excess procurement costs, or rework charges. Manufacturer shall not
be liable for any third party’s claims to Customer, even if connected with
Products delivered subject to this Product Warranty. Customer’s remedies as
specifically set forth in these terms constitute Customer’s exclusive remedies
for any breaches by Manufacturer to which they relate.
Article 3 RESTRICTED USE
Manufacturer’s Products are not certified by the Food and Drug Association
(FDA), hence shall not be used in the essential part of life support
appliances.
Manufacturer’s Products are not certified for use in essential, critical
performance parts for the automotive industry, hence shall not be used for
such purpose.
Manufacturer’s Products shall not be used in devices that may be used by any
person with intent to create a risk of loss of human life or considerable harm
to body, property or the environment unlawfully, in violation with any local
or national codes and other applicable law. Manufacturer reserves the right to
stop Manufacturer from selling to any Customers who use Products in violation
of the restricted use as described above. This Product Warranty applies to all
Products bought by Customer from Manufacturer, whether the Sale of Goods
Contract is effective or not.
Cube Logic Controls, LLC Missouri, U.S.A.
CubeLogic.io
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>