Tenda S105 5 Port 10-100Mbps Desktop Switch Installation Guide
- October 30, 2023
- Tenda
Table of Contents
Quick Installation Guide (Th1smanualappl1est0S105/S108)
Product Overview
| LED | Status | Description |
|---|---|---|
| Power | On | Power supply is provided to the device |
properly.
Off| Power supply is not provided to the
device properly.
Port
1 -8| Solid| Indicates the corresponding port is
connected.
Off| Indicates no connection is established.
Blinking| Indicates the corresponding port is
connected and transferring data.
(S105 and S108 are in a same serial. Here S108 is taken as a guide.)
Connect S105/S108 to the Internet
Safety and Emission Statement
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Adapter Information
Model. TEA13-05060 (0=A, B, E, K or D)
Input. 100-240V-50/60Hz, 0.3A
Output: 5V=– 600mA
Dongguan Ponon Technology Co.Ltd
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful.
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
( 1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Support
SHENZHEN TENDA TECHNOLOGY CO., LTD
Address: 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,
Nanshan District, Shenzhen, China. 518052
Technical Support: [email protected]
Telephone: (86 755) 2765 7180
Email: [email protected]
Website: http://www.tendacn.com
Skype: tendasz
YouTube: Tendasz1999