MAXIPACT k2 Cordless Portable Pressure Washer Instruction Manual
- June 15, 2024
- MAXIPACT
Table of Contents
MAXIPACT k2 Cordless Portable Pressure Washer
Product safety operating standard is applicable to our series of products
User security warning!
Use this product must carefully read the safety specification and related warning safety precautions! The following warnings and instructions will lead to electric shock, fire or persona l injury! Be sure to keep warning instructions for unfamiliar operators!
Hand-held lithium cleaning machine using safety warning!
- use the machine, make sure it is the original machine anti accessories (charger and battery pack)
- use shall not direct water now to the crowd and live components.
- Ensure that children are not exposed to the range area when the battery pack is charged.
- battery pack and charger are hit by drop collision or wet visible state should be stopped immediately!
- must charge the battery pack in the presence of someone!
- chargers must choose the original factory (without authorization or the original factory’s proposal to prohibit the use of other charging accessories or charging methods.
- charging environment is prohibited in high temperature or unattended or accessible locations for children.
- Unscheduled product inspection, charger, battery pack, car washing machine mainframe, if abnormal or damaged or malfunction do not modify or disassemble.
Warning
Reading Instructions
Batteries contain lithium, in order to protect the environment, waste
batteries should be classified recycling, not random littering!
Don’t put into the water Don’ t put into the fire source (or near the fire
source)
Safety precautions for battery pack
- do not disassemble, open or shred battery sets.
- It is forbidden to expose battery pack to heat source or high temperature sunlight.
- Do not short circuit the battery pack (positive and negative connection), do not put the battery pack in the box drawer to avoid short circuit between them or by other metal items.
- Do not remove the battery or battery pack from the original package before use
- prohibit battery packs from falling or mechanical impact.
- once the battery leaks, do not touch the leaking liquid directly into the eyes or skin. In case of accidental contact, rinse the contact area immediately with plenty of water and consult a doctor in time.
- shall not use non-original charger and battery pack. (Causes machine malfunction or accidental personal injury)
- Pay attention to the positive and negative signs on the battery pack to ensure proper connection.
- keep the machine and battery pack group away from children.
- If the purchase of a matching battery pack or charger must be directed by the manufacturer
- Ensure clean and dry battery pack. (If dust or residual water should be immediately wiped with clean cloth or natural air drying, do not use hair dryer or hot air gun drying)
- The battery pack must be charged before use, using the correct charger and referring to the manufacturer’s operating instructions or the original equipment in st ructions
- Not using the machine, do not charge the battery pack for a long time, pay attention to the green light is full of electricity, red light is in charge.
- In case of long-term storage of unused machines, battery packs should be subjected to several charge/discharge cycles to achieve optimal performance.
- The use of battery pack groups at room temperature (20°C +5°C) performs best.
- This product is only sui table for home doors and windows, courtyard, vehicles, garden cleaning operations, not for commercial operations or main frequency flow operations, not higher than the battery group use time or high frequency forced use.
- Remove t he battery pack whenever possible when not using the machine, disconnect from the mainframe and place it in a dry place not accessible to children.
- Battery pack group due to other human damage or collision, high temperature damage, reasonable treatment and recovery, do not discard the contaminated environment.
Product Description
Lithium wireless hand-held cleaning machine R & D, design and manufacture, product development: Based on the principle of user experience first, quality first, the pursuit of convenience, fast, portable, energy-saving and other superior characteristics, for the majority of car-loving people and home cleaning and washing and customized development of a product, At the same time, the product is not limited by power supply, with strong and stable battery. Product can be carried with you, multi-scene application, anytime, anywhere for you to save time, save cleaning costs, high efficiency to bring DIV washing fun and quality experience. Product parameters are configured according to user selection.12Vor 21 V according to the machine parameter nameplate.
Annex Options:
- Recommendations for insufficient use or enhancement –2 battery packs
- Wash stubborn stains — recommended round brush 3. Multi-angle Cleaning – Recommended addition of 5 in 1
Installation process and user request
|
---|---
Warning: Do not operate the cleaning machine without reading the
instructions carefully.
Warning: Do not use the spray gun on people.
Direct injection of live equipment
Open the box to check whether the machine is in good condition and whether it is the corresponding model for purchase. Then take out the attachment one by one and place it in the plane. Install and use according to the operation procedure!
Machine type:
12 V Smoke lighter 12 V lithium battery 21 V lithium battery
Step 1:
insert the battery pack correctly into the fuselage as shown. Charge time
about4 hours full or electricity, do filo overcharge).
Step 2
Second: insert the gun head correctly into the fuselage rotation as
shown.(Two -way force inserted into the rotary fastening)
Step 3:
insert the inlet joint (the joint contains a sealing ring to check infits
in good conditional into the fuselage as shown.(lf not installed in place,
them chine will not absorb water, idling, no pressure)
Step 4:
after completing the installation step, put the filter net on the other end
of the inlet pipe into the water source, must completely soak in the water,
can not float on the water surface, otherwise there will be air into the
operation can not use the machine normally.
Step 5 :
how to install the foam pot: insert the foam pot into the barrel and rotate
the clamp as shown (both ends join forces to insert the bayonet and rotate the
clamp)
Step 6:
after cleaning, remove battery pack and other accessories in a cool and dry
place.(Do not store car trunk or other high temperature environment in hot
weather)
Operational considerations
- After assembly, hold the trigger 10 s-15s empty the air in the intake pipe (still not out of the water to check whether the inlet is connected or the intake pipe is filled with water)
- 12V the use of the Smoke lighter (insert the DC tail of the voltmeter into the tail Jack of the machine, and insert the other end into the car voltage Jack to start the car power supply to avoid exhausting the battery power. If the machine can not start normally after the connection, you can try to change the car, there may be individual vehicle lighting hole can not use the cigarette lighter car washing machine.
The above is the installation and operation of each model of car washing machine, if you do not understand or other problems can contact after-sales customer service, provide operational video and intimate services.
How to clean the vehicle quickly
First use a fan nozzle to wet the body (top-down spraying) to wash off the
dust on the surface, then use a high pressure straight nozzle to flush the
dirty parts such as thick soil, then use a foam pot to spray the foam on the
whole body. Then scrub the body with a car wash sponge. Finally, wash the
vehicle with a car
washing machine. Normal car washing time is 10-20 minutes, water 25-40 liters
of water (2-3 barrels of water). If you need to strengthen battery life, you
can choose high configuration high-continuum version car washing machine.
Troubleshooting
| Frequently Asked Questions | Cause analysis | Solutions |
|---|---|---|
| N ormal operation of machine without water suction |
- machine is too high above Water
- filter screen foreign body dosing
- Failure of connection of Intake pipe to machine or rupture of Intake pipe
- Intake pipe bending clamp
- the pump froze because of the cold weather
The head of the water gun was blocked by a foreign body
| Down to below 1.5 m ground
Remove filter and dean
Check and replace water pipes, please contact customer service
Straighten out intake pipes and reconnect
Restart after thawing
Sudden Increase In effluent pressure or abnormal water type| Use a needle to
clear the nozzle or replace the new gun head
Machine does not start|
- battery pack not installed
- battery pack is dead
- battery pack Is broken
| Reinstallation
Charge or replace new battery pack
Replacement of battery pack
Battery peck not charged| Charger mismatch or broken| Replacement of matching
charger
Machine pressure discontinuity|
- Air In pump
- machine In low voltage mode
| Check that Joints and pipes are in good condition
Normal at low pressure, no treatment required
Machine automatic stop|
- battery pack is dead
- gun head blocked, current protection
| Charge or replace battery pack
To dear or replace the head
Leakage Inside machine| Chemical add source or assembly cause| Avoid using
chemical sources
Repair and maintenance
- each time before use, please check if the machine and parts are damaged, if there is damage stop using the machine, contact the supplier or manufacturer to replace the parts.
- intake pipes and filters must be cleaned after each use and bags should be kept to avoid oxidation for easy use in the future.
- After the use of the mainframe, the empty machine should run for a few seconds to drain the residual water from the machine, avoid oxidation dirt and weather ice, and store in a dry cool place.
- waste disposal: for damaged accessories and packaging materials must be classified and recovered, do a good job of marking.
- Do not store in the trunk of the car high temperature weather to avoid fi re caused by high temperature. Warning: do not use chemical acid and muddy water, must use clean, impurity-free clear water.
Manufacturer :888 Jiuzhou West Road, Yongkang Economic Development Zone
If there is any objection, the final power of interpretation is owned by the technical department of the company!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>