ULINE H-6675 12″ Deluxe Inspection Mirror Installation Guide
- June 7, 2024
- ULINE
Table of Contents
H-6675
12″ DELUXE INSPECTION MIRROR
TOOLS NEEDED
PARTS INCLUDED
ASSEMBLY INSTRUCTIONS
-
Install flashlight mount to handle as shown. (See Figure 1)
NOTE: Flashlight is not included with the inspection mirror. Fig
-
To adjust flashlight angle, loosen assembly’s wing nut, adjust angle and re-tighten wing nut. (See Figure 2)
-
Attach handle to mirror using included hex bolts and 9/16″ wrench. (See Figure 3)
-
Remove protective cover on center bolt of caster assembly. (See Figure 4)
-
With included lock washer placed onto center assembly center bolt, tighten caster assembly to threaded hole in center of mirror back. Use flathead screwdriver as necessary. (See Figure 5)
MAINTENANCE
To clean mirror, use a mild glass cleaner and a soft cloth.
WARNING! Do not use any cleaner containing ammonia, as this could damage the mirror.
1-0621 IH-6675
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>