SWPEC 1.2M Universial Steel Belts For Electrical Pole Mounting Set Instruction Manual
- June 15, 2024
- SWPEC
Table of Contents
1.2M Universial Steel Belts
For Electrical Pole Mounting Set
Instruction Manual
Pole-Mounting Install Instruction
What’s in the box?
2 X Stainless Steel Belts
2 X Stainless Lock Catch
What’s the specification?
Product size:
- 1201cm / 47.20.4” (for Stainless Steel Belts)
- 73cm / 2.81.2” (for Stainless Lock Catch)
- Material: Stainless Steel
- Bearing Weight: ≥100KGS
Pole-mounting Steps
- Push the Stainless Lock into the middle part of the cabinet back beam. (see attached red mark).
- Pass the Stainless Belt through the Stainless Steel Lock, pay attention to the directions of the Stainless Steel Belt.
- Thread the Stainless Steel Belt in to this hole.
- Tighten the Belt.
- Pull the clasp back and forth to tighten.
- After tightening, the wrench can be press down, and it can be knocked with the help of the external force.
- Cut the extra hoop to suitable size, and the installation completed.
If you have any install doubts of questions feel free to contact us via
SWPEC.BOX@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>