Pablo 356110000176 UMA Sound Lantern Owner’s Manual

Pablo 356110000176 UMA Sound Lantern

UMA INDICATOR OVERVIEW

INDICATOR LIGHT FUNCTIONS:

CHARGING UMA

UMA USES AN INTERNAL RECHARGEABLE LITHIUM POLYMER BATTERY THAT WILL LAST THE LIFETIME OF THE DEVICE. FULLY CHARGE UMA’S BATTERY PRIOR TO FIRST USE. TO CHARGE THE BATTERY, CONNECT UMA TO THE INCLUDED POWER SUPPLY AND KEEP IT CONNECTED TO THE POWER SOURCE UNTIL POWER INDICATOR LIGHT TURNS GREEN. IT MAY TAKE UP TO 2.5 HOURS TO FULLY CHARGE UMA.

UMA LIGHT FUNCTION

PRESS POWER SWITCH BRIEFLY TO TURN UMA ON. POWER INDICATOR LIGHT WILL ILLUMINATE. TURN LIGHT CONTROL RING CLOCKWISE PAST “CLICK” TO TURN ON LIGHT. ROTATE LIGHT CONTROL RING TO ACTIVATE FULL RANGE DIM CONTROL.

CONTROLS

• ROTATE CLOCKWISE TO INCREASE LIGHT
•  ROTATE COUNTER CLOCKWISE TO DECREASE LIGHT
• PHYSICAL ‘CLICK’ REGISTRATION INDICATES LIGHT IS OFF

NOTE:

• UMA WILL TURN OFF AUTOMATICALLY AFTER 15 MINUTES OF INACTIVITY.
• (INACTIVITY = LIGHT IS OFF & NO SOUND IS PLAYING)

UMA VOLUME FUNCTION
VOLUME IS CONTROLLED THROUGH A TOUCH CAPACITIVE PAD ON THE TOP OF UMA. USING YOUR FINGER, SLIDE CLOCKWISE TO TURN VOLUME UP, SLIDE ANTI CLOCKWISE TO TURN VOLUME DOWN.

CONTROLS

• TOUCH INTERFACE
• REQUIRES 360 DEGREES OF TOUCH ROTATION TO TRAVEL FROM 0%-100% VOLUME
• SLIDE FINGER CLOCKWISE TO INCREASE VOLUME
• SLIDE FINGER COUNTER CLOCKWISE TO DECREASE VOLUME
• VOLUME IS CONTROLLED BY DIRECTION AND DISTANCE OF SLIDE REGARDLESS OF POSITION

NOTE:

• UMA WILL TURN OFF AUTOMATICALLY AFTER 15 MINUTES OF INACTIVITY.
• (INACTIVITY = LIGHT IS OFF & NO SOUND IS PLAYING)

CONNECTING UMA TO A BLUETOOTH® WIRELESS TECHNOLOGY ENABLED DEVICE
PAIRING:
WHEN CONNECTING A BLUETOOTH DEVICE TO UMA FOR THE FIRST TIME, THE DEVICE MUST BE REGISTERED TO UMA. THIS IS CALLED PAIRING. ONCE PAIRING IS COMPLETED, UMA WILL REMEMBER YOUR  DEVICE AND CONNECT AUTOMATICALLY. UMA CAN REMEMBER UP TO8 DEVICES. TO PAIR YOUR DEVICE WITH UMA, FOLLOW THESE STEPS:

1. PRESS POWER SWITCH BRIEFLY TO TURN UMA ON. POWER INDICATOR LIGHT WILL ILLUMINATE.
2. PRESS AND HOLD THE BLUETOOTH PAIRING BUTTON ON UMA FOR ONE SECOND TO PUT UMA INTO PAIRING MODE, INDICATED BY A BREATHING BLUE LIGHT. UMA WILL REMAIN IN PAIRING MODE UNTIL A CONNECTION IS MADE, OR FOR UP TO ONE MINUTE.
3. TURN ON THE BLUETOOTH FUNCTION ON YOUR DEVICE.
4. IN THE BLUETOOTH SETTINGS OF THE DEVICE, SELECT “UMA SOUND LANTERN FROM THE LIST OF AVAILABLE CONNECTIONS
5. BLUETOOTH INDICATOR LIGHT ON UMA WILL CHANGE TO SOLID BLUE WHEN THE CONNECTION IS SUCCESSFUL. AFTER 10 SECONDS OF CONNECTION, INDICATOR LIGHT WILL TURN OFF.
6. PLAY MUSIC ON YOUR DEVICE. ENSURE VOLUME ON YOUR DEVICE IS NOT SET TO MUTE.
7. AFTER YOUR DEVICE HAS PAIRED WITH UMA, IT WILL CONNECT AUTOMATICALLY. IF IT DOES NOT CONNECT AUTOMATICALLY, REPEAT THE PAIRING PROCESS TO REGISTER YOUR DEVICE.

IF YOU HAVE DIFFICULTY CONNECTING TO UMA, PLEASE REFER TO THE TROUBLESHOOTING GUIDE IN THIS INSTRUCTION MANUAL.

CONNECTING UMA TO A DEVICE VIA AUXILIARY CABLE
UMA CAN PLAY MUSIC FROM AN AUDIO DEVICE BY CONNECTING AN AUX-IN CABLE. TO CONNECT YOUR DEVICE TO UMA WITH AUXILLIARY
CABLE, FOLLOW THESE STEPS:

1. PRESS POWER SWITCH BRIEFLY TO TURN UMA ON. POWER INDICATOR LIGHT WILL ILLUMINATE.
2. PLUG AUXILLIARY CABLE INTO UMA AUDIO-IN PORT. BLUETOOTH WIRELESS TECHNOLOGY WILL BE DISABLED AND ALL WIRELESS CONNECTIONS WILL BE DISCONNECTED.
3. PLUG THE OTHER END OF THE AUXILIARY CABLE INTO THE AUDIO-OUT (HEADPHONE) PORT ON YOUR DEVICE.
4. PLAY MUSIC ON YOUR DEVICE. ENSURE VOLUME ON YOUR DEVICE IS NOT MUTED.
   • NOTE. ALIYILLIARY CARIS IS NON_DIRECTION A

SURFACE MOUNT OPTION

• UMA CAN BE BOLTED TO A SURFACE USING A STANDARD M6 X 1MM MACHINE SCREW (NOT PROVIDED).
• SCREW LENGTH IS DETERMINED BY ADDING THE TABLE THICKNESS TO THE 10MM INSERT LENGTH.

TRANSPORTING UMA

• UMA IS INTENDED TO BE TRANSPORTED IN THE INCLUDED CLOTH BAG FOR CONVENIENT AND PROTECTED TRAVEL. UMA CAN BE OPERATED WHILE IN THE TRAVEL BAG, AND IS RECOMMENDED IN DAMP CONDITIONS.

CARE INSTRUCTIONS

• WIPE UMA CLEAN WITH A SOFT DAMP CLOTH. AVOID
• AMMONIA- BASED CLEANERS. PROTECT UMA WITH THE
• PROVIDED CARRY BAG WHEN TRANSPORTING. DO NOT
• SUBMERGE OR EXPOSE TO RAINFALL OR SPLASHING WATER.

BLUETOOTH® WIRELESS TECHNOLOGY CONNECTION TROUBLESHOOTING GUIDE
IF YOU HAVE DIFFICULTY CONNECTING YOUR DEVICE TO UMA, FOLLOW THIS GUIDE

UMA CANNOT MAKE A BLUETOOTH

CONNECTION

| UMA IS TURNED OFF| PRESS POWER SWITCH BRIEFLY TO TURN UMA ON. POWER INDICATOR LIGHT WILL ILLUMINATE
BLUETOOTH FUNCTION IS TURNED OFF| PRESS THE BLUETOOTH BUTTON TO ENABLE BLUETOOTH FUNCTION
UMA HAS NOT YET BEEN PAIRED WITH THE BLUETOOTH DEVICE| PERFORM PAIRING PROCESS
UMA IS TOO FAR FROM THE

BLUETOOTH DEVICE

| MOVE THE AUDIO SOURCE CLOSER. MAXIMUM DISTANCE FROM DEVICE IS 30M UNOBSTRUCTED
AN AUX-IN CABLE IS CONNECTED| DISCONNECT AUX-IN CABLE
ANOTHER BLUETOOTH DEVICE IS CONNECTED| DISCONNECT OR POWER OFF THE OTHER BLUETOOTH DEVICE
THE PAIRING INFORMATION HAS BEEN DELETED. UMA CAN REMEMBER UP TO 8 DEVICE PAIRINGS. IF A 9TH DEVICE IS PAIRED, UMA WILL FORGET THE

FIRST DEVICE

| PERFORM PAIRING PROCESS AGAIN
UMA IS NOT REGISTERED ON THE DEVICE’S BLUETOOTH CONNECTION

LIST

| PERFORM PAIRING PROCESS AGAIN
THERE IS A DEVICE (MICROWAVE, WIRELESS LAN, ETC.) THAT OUTPUTS SIGNALS IN THE 2.4 GHz FREQUENCY BAND NEARBY| MOVE UMA AWAY FROM ANY DEVICE THAT EMITS RF SIGNALS OR INTERFERENCE

LIGHT AND AUDIO FUNCTION TROUBLESHOOTING GUIDE
IF YOU HAVE DIFFICULTY PROPERLY OPERATING UMA FOLLOW THIS GUIDE

DEVICE IS 10M
THERE IS A DEVICE (MICROWAVE, WIRE- LESS LAN, ETC.) THAT OUTPUTS  SIGNALS IN THE 2.4 GHz FREQUENCY BAND NEARBY| MOVE UMA AWAY FROM ANY DEVICE THAT EMITS RF SIGNALS OR INTERFERENCE
THE VOLUME ON EITHER THE AUDIO SOURCE OR UMA IS TOO LOW| ADJUST THE VOLUME ON BOTH UMA AND THE AUDIO SOURCE
POOR CONNECTION BETWEEN UMA AND THE SOURCE DEVICE| RESTART BOTH THE AUDIO SOURCE AND UMA
BLUETOOTH PAIRING FAILED| RE-PAIR YOUR DEVICE WITH UMA
SOURCE DEVICE IS PAIRED TO A DIFFERENT BLUETOOTH DEVICE| DISCONNECT OR POWER OFF THE OTHER

BLUETOOTH DEVICE

3.5MM AUXILLIARY AUDIO CONNECTION IS DISTORTED OR DROPPING OUT| 3.5MM AUXILLIARY CABLE IS NOT FULLY CONNECTED TO EITHER UMA OR THE SOURCE DEVICE| CHECK THAT THE 3.5MM AUXILLIARY CABLE IS SECURELY CONNECTED TO BOTH UMA AND THE SOURCE DEVICE
SOURCE DEVICE ISN’T WORKING PROPERLY| TRY A DIFFERENT SOUCE DEVICE TO ENSURE THE ISSUE ISN’T THE SOURCE DEVICE
3.5MM AUXILLIARY CABLE IS FAULTY OR DAMAGED| TRY A DIFFERENT 3.5MM AUXILLIARY CABLE
STREAMED AUDIO

CONTENT IS DISTORTED OR DROPPING OUT

| INTERNET CONNECTIVITY ISSUES| FOLLOW YOUR ROUTER/ISP INSTRUCTIONS

TO ENSURE YOUR INTERNET CONNECTION IS FUNTIONING PROPERLY

UMA POWER IS ON, LANTERN DOES NOT ILLUMINATE| DIMMER CONTROL RING IS TURNED OFF| ENSURE DIMMER CONTROL RING IS TURNED CLOCKWISE PAST THE ‘CLICK’ TO ILLUMINATE
AUTO SHUT-OFF IS NOT WORKING| LIGHT IS STILL ON OR SOUND IS STILL PLAYING| MUST TURN OFF LIGHT AND SOUND SOURCE FOR AUTO SHUT-OFF TO FUNCTION

MORE INFO
FOR MORE INFORMATION AND PRODUCT DETAILS VISIT WWW.PABLODESIGNS.COM.

SPECIFICATIONS

• LIGHT OUTPUT: 180 LUMENS MAX
• BATTERY RUNTIME: 5 TO 8 HOURS DEPENDING ON USE
• CHARGE TIME: UP TO 2.5 HOURS
• POWER ADAPTER INPUT: 100-240V ~ 50/60Hz 1.3A MAX
• POWER CONSUMPTION: 6.5W (LIGHT) 12W MAX (SPEAKERS)
• SPEAKER WATTAGE: 12W MAX 1.5W TYPICAL
• BLUETOOTH VERSION: 5.0
• BLUETOOTH RANGE: 10M
• DIMENSIONS: 11″ x 6″ x 6″ (28cm x 15.4cm x 15.4cm)
• WEIGHT: 2.85lbs (1.3kgs)
  • U.S. PATENT D773,704
  • MADE IN CHINA

WARRANTY

• FOR WARRANTY AND ADDITIONAL TROUBLESHOOTING INFORMATION VISIT
• WWW.PABLODESIGNS.COM/PRODUCT/UMA.
• FOLLOW US
• FOLLOW US ON FACEBOOK AND INSTAGRAM
• WWW.FACEBOOK.COM/PABLODESIGNSSF.
• @PABLODESIGNSSF

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>