BOSCH T07 Cabin Filters Installation Guide

Installation Guidelines for Cabin Filters
Part Number: T07
0986 AF7 009

T07 Cabin Filters

This manual describes how to replace the cabin filter. Before installing, please be sure to read this book to ensure safe and correct installation.
Estimated Installation Time: 5-10 minutes
In some cases, tools are required and replacement work adds additional time.
Recommended replacement time
1 year or 10,000km
However, it is recommended to check and replace your cabin filter as soon as possible when driving in heavily soiled areas.
The contents of this installation guide are accurate as of May 2022

Precautions for installation and use

• Be sure to park your vehicle in a safe place with the engine and air conditioner turned off before commencing the replacement process.
• When replacing your cabin filter, please refer to the instruction manual of the vehicle, maintenance manual, etc.
• This guide is just an example and may differ from the actual vehicle.
• Please refrain from unreasonable work. It may result in damaging the vehicle or personal injury.
• If you are not confident in the work please consult your local workshop.
• Check the direction of the arrow so that you do not mistake the front and back of the filter when installing.
• This product displays AIR FLOW (wind direction) with an arrow, but other companies may display “TOP UP” on their filters.

T07 Cabin Filter Installation Guide

Type 1
Removing the glove box

1. Please switch the inside/outside air changeover switch to circulate inside air before starting to unlock the damper.

1. Open the glove box in the direction of the arrows
2. Remove the claws, then glove box.

Removing the old cabin filter

1. Raise the filter cover and pull it towards yourself.
2. Push the lock (2 places) and pull the filter tray towards yourself.

Installing your Bosch cabin filter

1. Insert the Bosch cabin filter with the “AIR FLOW” arrow pointing down
2. Restore the removed vehicle parts to their original positions

Type 2

1. Open the glove box, press from both sides to remove the pins (2 places)
2. Remove the glove box

*Step 2 Enlarged view of Damper**

1. For vehicles with a damper, pull the damper from the claws before removing the glove box

Removing the old cabin filter

1. Pinch the hook on the left side of the filter cover
2. Remove the filter cover

Installing your Bosch cabin filter

1. Move the old filter in numerical order in the figure and to remove it.
2. Install the Bosch cabin filter in reverse order of the removal
3. Restore the removed vehicle parts to their original positions

Attention

• This work procedure is an example and may vary across different vehicles.
• Bosch’s cabin filter indicates airflow with an arrow on the product. Please note that the arrow may indicate “TOP” on other genuine or IAM products.
• Please read the “Precautions for installation and use” on the installation guide cover before commencing.
• NOTE: used cabin filters cannot be cleaned and reused.

Robert Bosch (Australia) Pty. Ltd.
1555 Centre Road
Clayton VIC 3168
For Further information please contact Bosch on:
Email: CustomerService.AA@au.bosch.com
Australia: 1300 307 040 www.boschaftermarket.com.au
New Zealand 0800 452 896 www.boschaftermarket.co.nz

References

• Invented for life | Bosch Global
• Home | Bosch Mobility Aftermarket in Australia and New Zealand
• Home | Bosch Mobility Aftermarket in Australia and New Zealand

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>