ULINE S-18439 Corstat In-Plant Handler 17 x 10 x 4″ Instructions
- June 7, 2024
- ULINE
Table of Contents
ULINE S-18439 Corstat In-Plant Handler 17 x 10 x 4″ Instructions
BOX ASSEMBLY
- Place unassembled box on a flat surface with flaps facing up. **(See Figure 1)
Figure 1
**
- Unfold all flaps **. (See Figure 2)
**
-
On one side, fold side flaps (D) outward. (See Figure 3)
-
On the shorter side of the box, fold in all four side flaps (E) over slots (F). (See Figure 4)
-
Fold side panel (C) over side flaps (E). Make sure side flaps (D) are folded outward and against side panel (A). (See Figure 5)
-
Lock the side panel tabs (C) into slots (F). (See Figure 6)
-
Repeat steps 3-6 for the other side.
-
Fold side flap (A) over side flaps (D), locking the side flap tab (A) into slots (G). (See Figure 6)
-
Repeat step 8 for the other side.
-
Box is assembled. (See Figure 7)
BOX LID ASSEMBLY
- Fold lid sides (H) along the crease. **(See Figures 8-9)
**
-
On one side of the box lid, fold in lid sides (I) over slots (K). (See Figure 10)
-
On the same side of the box lid, fold box top lid (J) over tabs (I), locking the top tab lids into slots (K) on the top panel. (See Figures 11-12)
-
Repeat steps 1-3 for the other side.
-
Lid assembled. (See Figure 13)
BOX DIVIDER ASSEMBLY
SHORT DIVIDER
- Fold short divider along the crease line. **(See Figures 14-15)
**
LONG DIVIDER
- Fold long divider along the crease line. **(See Figures 16-17)
**
INSERTING DIVIDERS
-
. Insert long divider into the box as needed, ridges facing upward. (See Figure 18)
-
Insert short divider into the box as needed, ridges facing downward and align with the ridge from the long divider . (See Figure 19)
Contact Us
Phone: 1-800-295-5510
Web: uline.com
References
- Uline.ca - Shipping Boxes, Shipping Supplies, Packaging Materials, Packing Supplies
- Uline.mx - Cajas para Envíos, Materiales de Empaque, Materiales de Empaque, Suministros para Empaque
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>