ULINE H-5525 Island Installation Guide
- June 7, 2024
- ULINE
Table of Contents
H-5525
ISLAND
1-800-295-5510
uline.com
TOOLS NEEDED
PARTS LIST
ASSEMBLY
1. Attach side frames to connecting bars using two screws per bar and the
enclosed Allen wrench. ( See Figure 1 )
NOTE: Be sure two connecting bars with holes are on top of each side frame
with holes facing out, in order to secure the top board.
2. Insert the four connecting clips into the hollow part of each table leg. (See Figure 2)
3. Set each shelf on the frame bars and the top board on top. Align holes
inside frames with the holes in the bottom of each shelf and top board. Attach
side frames to shelves and top board using four frame screws per shelf/top and
the enclosed Allen wrench. (See Figure 3)
4. Attach the
connecting clips from Step 2 to the top board by drilling three clip screws in
each corner. (See Figure 4)
5. Secure the
two connecting bars to the top board by drilling six top screws on each side.
(See Figure 5)
1-Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>