vtech Play & Chase Puppy User Guide

: June 7, 2024
: vtech

Table of Contents

INTRODUCTION
INCLUDED IN THE PACKAGE
GETTING STARTED
PRODUCT FEATURES
ACTIVITIES
MELODY LIST
SONG LYRICS
CARE & MAINTENANCE
TROUBLESHOOTING
CONSUMER SERVICES
Product Warranty/ Consumer Gu
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

vtech Play & Chase Puppy User Guide

INTRODUCTION

Thank you for purchasing the Play & Chase Puppy

Follow this cute puppy for three ways to play! Explore numbers and counting with sit-down play, then get up and dance with this interactive friend! Keep the giggles going with a game of follow the leader!

INCLUDED IN THE PACKAGE

Play & Chase Puppy
Parent’s Guide

WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety

NOTE
Please save this parent’s guide as it contains important information.

Removing the Packaging Locks

Rotate the packaging locks anticlockwise 90 degrees.
Pull out the packaging locks and discard.

NOTE
Please cut and discard the plastic strap that attaches the Play & Chase Puppy to the box. The strap is no

GETTING STARTED

Battery Removal and Installation

Make sure the unit is turned Off.
Find the two battery covers located on the bottom of the unit, use a screwdriver to loosen the screws and then open the battery covers.
Remove old batteries by pulling up on one end of each battery.
Install 4 new AA batteries following the diagram inside the battery boxes. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery covers and tighten the screws to secure.

WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

IMPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES:

Remove rechargeable batteries from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health

The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.

The solid bar indicates that the product was placed on the market after 13th August, 2005.

Help protect the environment by disposing of your product or batteries responsibly.

VTech® cares for the planet.

Care for the environment and give your toy a second life by disposing of it at a small electricals collection point so all its materials can be recycled.

In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with you local council for kerbside collections.

PRODUCT FEATURES

On/Off/Mode Switch
To turn the unit On, slide the On/Off/Mode Switch to the Learning mode or the Follow mode position. You will hear a song, playful phrases and sounds. To turn the unit Off, slide the On/Off/Mode Switch to the Off position.
Automatic Shut-Off
To preserve battery life, the Play & Chase Puppy will automatically shut off after approximately 50 seconds without input, or when the front and back sensors have been continuously activated for 10 minutes without other inputs. The unit can be turned on again by pressing any button, or by sliding the On/Off/Mode Switch.

NOTE
This product is in Try-Me mode in the packaging. After opening the package, please remove the demo tag from the bottom of the unit.
Then, turn the Play & Chase Puppy off and on again to proceed with normal play. If the unit powers down or if the light fades out during play, please install a new set of batteries.

ACTIVITIES

Light Up Buttons
Press the Light Up Buttons to learn numbers, counting, feelings and motions, as well as hearing singalong songs and music. The puppy will dance and move in response to the voice and sound responses if it is on the floor. The lights will flash with the sounds.
Hand Button
Give puppy a high five by pressing the Hand Button, as well as hearing playful phrases and music. The lights will flash with the sounds.
Front and Back Sensors
The puppy is equipped with special sensors on the front and back of the hoverboard. Approach the sensors to activate them and see the puppy ride away or rotate and respond with playful phrases, music and sounds. The lights will flash with the sounds

NOTE
The infrared light sensors in the hoverboard are sensitive to sunlight.
The sensors may not perform properly in brightly lit, sunny rooms or under direct sunlight.
Pick-Up Sensor
The puppy has a special sensor on the bottom of the hoverboard, so the puppy knows when it has been picked up. Each time you pick up the puppy, you will hear a cute phrase. The puppy’s heart button will flash with the sounds.

MELODY LIST

A-Tisket, A-Tasket
Bingo
The Entertainer
Glow Worm
Hey, Diddle Diddle
Skip to My Lou
One Man Went to Mow a Meadow
Hickory, Dickory, Dock
Aiken Drum
Bear Went Over the Mountain
Did You Ever See a Lassie?
Where Has My Little Dog Gone?
Old MacDonald
Humpty Dumpty
The Wheels on the Bus

SONG LYRICS

Song 1
Follow me. One, two, three.
I am moving really fast, can you catch me?
Song 2
Ride, ride, ride my board, Turning round and round.
I like to move, I like to groove, Every day and night.
Song 3
I hop on to my hoverboard and zoom around the ground.
I wiggle my body, I wag my ears and spin all around.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on hard surfaces and do not expose the unit to moisture or water

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit On. The unit should now be ready to use again.
If the unit still does not work, install a new set of batteries

If the problem persists, please contact our Consumer Services Department, and a service representative will be happy to help you.

CONSUMER SERVICES

Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.

UK Customers:
Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support
Australian Customers:
Phone: 1800 862 155
Website: support.vtech.com.au
NZ Customers:
Phone: 0800 400 785
Website: support.vtech.com.au

Product Warranty/ Consumer Gu

UK Customers:
Read our complete warranty policy online at vtech.co.uk/warranty.
Australian Customers:
VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED –
CONSUMER GUARANTEES
Under the Australian Consumer Law, a number of consumer guarantees
apply to goods and services supplied by VTech Electronics (Australia)
Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.

Visit our website for more information about our products, downloads, resources and more.
www.vtech.co.uk
www.vtech.com.au