ACURITE 13030 Alarm Clock with Intelli-Time Instruction Manual
- June 7, 2024
- Acurite
Table of Contents
DESIGNED TO WORK FOR YOU
Alarm Clock
with Intelli-Time®
#13030
Instruction Manual
Package Contents:
(1) Alarm Clock
(1) Instruction Manual
Thank You for purchasing this ACURITE® product. This alarm clock features
Intelli-Time® technology, which instantly sets the clock once the clock is
plugged in. Please read this manual in its entirety to fully enjoy the
benefits and features of this product. Please keep this manual for future
reference.
NOTE: A clear film is applied to the display at the factory that must be
removed prior to using this product. Locate the clear tab and simply peel to
remove.
OVERVIEW OF FEATURES
About Intelli-Time®
Your new alarm clock is equipped with Intelli-Time technology which is pre-
programmed with the correct time and date. Intellitime instructs the clock to
self-set itself once batteries are installed. The Intelli-Time feature
requires an internal memory battery to operate correctly. This battery is
located in the Intelli-Time memory battery compartment on the bottom of the
clock and is pre-installed at the factory. We suggest the replacement of the
backup battery every 5 years. We recommend the replacement of the backup
battery in 1-2 years if the unit is not powered on for a long period of time.
Do not replace the memory battery unless the clock is plugged in and the
display is operating at the correct time.
SETUP
Plug the AC power cord into a 110v AC power outlet.
CAUTION: To prevent electric shock, do not use this plug with an
extension cord, receptacle, or any other outlet unless the blades can be fully
inserted to prevent blade exposure.
WARNING: To prevent fire or shock hazards, do not expose the alarm clock
to rain or moisture.
Basic Clock Setup
After plugging in the clock, the clock will be set to the proper time for the
default time zone. Next, you will need to select your time zone for the clock
to display your correct time. The time zone selection switch is located on the
bottom of the alarm clock.
Another preference that may need to be set depending on your location is
Daylight Saving Time (DST). Certain areas do not observe DST, and you may need
to disable the DST setting (OFF). The DST selection switch is located on the
bottom of the alarm clock.
Optional Custom Time Setting
If you wish to set the clock slightly ahead or slightly behind, or if the
Intelli-Time internal memory battery is allowed to go dead, you may set the
time and date simply by following the custom setup procedure below:
- Press AND HOLD the “clock set” button for 3 seconds, the HOUR will blink.
- Press the “ ” or “ ” buttons to adjust the HOUR. Note the PM indicator.
- Press the “clock set” button again to confirm your selection and move on to setting the MINUTES.
- Press the “ ” or “ ” buttons to adjust the MINUTES.
- Press the “setup” button again to confirm your time setting and move on to setting the calendar.
- Set the Day, Month and Date, in the same manner, the time was set.
- Press the “clock set” button to exit custom time setting mode.
OPERATION
Alarm Clock Setting
To set the alarm time, press AND HOLD the “set alarm” button for 3 seconds to
enter into alarm time set mode. The hour will flash.
- Press the “ ” or “ ” buttons to adjust the hour, note the PM indicator.
- Press the “set alarm” button to confirm hour selection and move on.
- Press the “ ” or “ ” buttons to adjust the minutes.
- Press the “set alarm” button to confirm and exit alarm time set mode.
Alarm Clock ON or OFF
TO TURN alarmed ON: slide the “Alarm on/off” switch to the right “ON”
position.
ALARM ON INDICATION: the display will indicate “alarm on”
TO TURN ALARM OFF: slide the “Alarm on/off” switch to the left “OFF” position.
Alarm Clock SNOOZE function
When the alarm is sounding, you may activate the 8-minute SNOOZE function by
firmly pressing down on the backlight/snooze area at the top of the alarm
clock. The SNOOZE function may be activated up to 10 times.
Dimmer LO/HI
You may select dimmer LO or HI by sliding the “Dimmer” switch to the desired
setting to optimize the display brightness for the location.
Volume LO/HI
You may select alarm volume level LO or HI by sliding the “Dimmer” switch to
the desired to set to optimize the alarm volume for the location.
http://www.chaneyinstrument.com/product_reg.htm
Please DO NOT return the product to the retail store.
For technical assistance and product return information, please call
Customer Care: 877-221-1252 Mon. – Fri.
8:00 A.M. to 4:45 P.M. (CST)
www.chaneyinstrument.com
LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of
good material and workmanship and to be free of defects if properly installed
and operated for a period of one year from the date of purchase. REMEDY FOR
BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO THE REPAIR OR REPLACEMENT OF
DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to
breach the warranty contained herein within ONE YEAR from the date of sale
will, upon examination by Chaney, and at its sole option, be repaired or
replaced by Chaney. In all cases, transportation costs and charges for
returned goods shall be paid for by the purchaser. Chaney hereby disclaims all
responsibility for such transportation costs and charges.
This warranty will not be breached, and Chaney will give no credit for
products it manufactures which shall have received normal wear and tear, been
damaged, tampered with, abused, improperly installed, damaged in shipping, or
repaired or altered by others than authorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY ACCEPTANCE OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM, OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM, OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
Chaney Customer Care
877-221-1252
Mon-Fri 8:00 a.m. to 4:45 p.m. CST
www.chaneyinstrument.com
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may NOT cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, There is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE : The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
If at any time in the future you need to dispose of this product please note
that: Waste electrical products should not be disposed of together with
household waste. Please recycle where facilities exist. Check with your local
Authority or retailer for recycling advice
Patent numbers: 5,978,738; 6,076,044; 6,597,990
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>