ACURITE 00291E Red Digital Timer Instructions
- June 7, 2024
- Acurite
Table of Contents
Counts up or down
Magnetic Back
Instructions for use:
- The timer is “always on”.
- In sleep mode, the LCD will display 00:00. This will not drain the battery.
- MINUTES: Press the “MINUTES” button until the desired number is reached. Hold the “MINUTES” button down to activate “rapid advance”.
- SECONDS: Press the “SECONDS” button until the desired number is reached. Hold the “SECONDS” button down to activate “rapid advance”.
- START/STOP: Pressing the “START/STOP” button without entering a time causes the timer to start counting up. Pressing the “START/STOP” button after entering a time will cause the timer to start counting down from the time entered.
- CLEAR: Press the “CLEAR” button to clear the time displayed.
When the timer is set but NOT running: Press the “START/STOP” button to
begin counting down from the time entered. When the timer is running:
Press the “START/STOP” button to stop the countdown.
General Timer Description: This is a countdown timer (this means that
when the timer reaches 00:00 it will sound an alarm). The alarm will sound for
1 minute at 75 dB.
**Product Facts
**
| Battery: | 1 AAA (not included) |
|---|
Measurement Range
| Time: | 99 minutes, 59 seconds |
|---|
WARNING:
DO NOT place the unit on a hot surface or grill.
DO NOT submerge in water.
Limited 1-Year Warranty
Register your product on AcuRite.com
MADE IN CHINA
Customer Support:
877-221-1252
www.AcuRite.com
AcuRite is a registered trademark of Chaney Instrument Co.
965 Wells St. • Lake Geneva, WI 53147
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>