MOB MO6395 1080P HD Webcam and Ring Light User Manual
- June 3, 2024
- MOB
Table of Contents
MOB MO6395 1080P HD Webcam and Ring Light
Hereby, MOB, declares that item MO6395 is in Compliance with the essential requirements and other relevant conditions of Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: www.momanual.com.
Thank you for choosing our network camera series products!
Based on the non-drive scheme, plug and play, matches with the high-speed USB
interface, keeps the video picture smooth and clear.
Unpacking inspection:
When you receive the camera, please check the product packaging and appearance for obvious damage firstly, then open the product outer packing box, refer to the packing list, and check whether the accessories attached with the product are complete. After confirmation, the equipment can be installed and used.
Packing List
- 1x Camera (with USB cable)
- 1x User manual.
Camera Connection:
Plug one end of the USB cable of the camera into the USB interface of the
set-top box / smart TV / computer and wait for the system to run and install
automatically.
Note: the following figure is only for camera connection
- Smart TV connection methods:****
- IPTV TV set top box connection methods:****
Camara Plug in USB connection IPTV TV set-top box Smart TV
- Computer connection methods:****
Camara Plug in USB connection Computer main box Computer display
Product parameters and application
| Item | Parameters |
|---|---|
| Sensor type | CMOS Sensor |
USB applicable
interface port
| 3.0 2.0 port
Lighting requirements| Above 10Lux.Sec
Image static storage format| BMP/JPEG
Effective pixel| 640480/1280720/1920*1080
Voice microphone| Built-in
White balance / exposure Automatic control /
gain control
| Automatic
Support system| Support windows 10/ Windows 7 /Vista / XP (SP2 or above) /
Android System / Linux/ Support wechat,QQ, MSN, Yahoo and other instant Video
chat software, and support
Online video chat room
---|---
FAQ
| Question | Possible Reason | Resolvent |
|---|---|---|
| The camera cannot enter the normal recognition working state | 1. The USB |
cable is not connected properly.
2. The software is not working properly.
| 1. Unplug the USB cable again connect it with another USB port.
2. Restart the software.
3. restart set-
top box / smart tv / computer