P43047741 Cat Cave Dome anko Instruction Manual
- June 7, 2024
- Anko
Table of Contents
P43047741 Cat Cave Dome anko
Contents
Instructions
Step 1. Screw the connecting rods ( B x 8 pcs ) into the boards ( No.1 &
No.2 ) separately. Then install the acrylic cover ( No.5 ) in middle of the
board ( No.1 ) with screws (C x 4pcs ) by following the pre drill holes.
Please refer to the image below.
Step 2. Insert the boards ( No.3 x 2 pcs ) to the connecting rods and
insert & lock with nuts ( A x 4pcs ) . Please note to rotate nuts A by
90°after inserting into holes to make sure it is locked.
Step 3.
Insert boards ( No.4 x 4 pcs ) into the grooves on the bottom of board ( No.2
).
Step 4.
Put on the top board ( No . 1 ). Please make sure the grooves and holes are in
right position, insert and then lock with nuts ( A x 4pcs ) from the side
holes.
Please note to rotate nuts A 90° after inserting into holes to make sure it is
locked.
WARNING:
Pet toy – Not intended for children.
It is the responsibility of the pet owner if this toy is suitable for their
pet’s style of play. No pet toy is indestructible and can be damaged during
play. For your pet’s safety, inspect regularly and remove if damaged. Always
supervise your pet during play.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>