SPORSTECH DFT100 Workout Treadmill Machine User Manual

SPORSTECH DFT100 Workout Treadmill Machine

Dear customer,
We are pleased you chose a device from the SPORTSTECH product range. SPORTSTECH sports equipment offers you high quality and new technology.

In order to fully use the potential of your device and be able to enjoy it for many years, please read this manual ca-refully before starting up and beginning of training, and use the device according to the instructions. The operational safety and function of the device can only be guaranteed if the safety instructions in this user manual are observed. We shall not assume any liability for damages resulting from improper use or incorrect operation.

• Make sure that ALL persons using the device have read and understood this user manual. Keep this manual close to the device.
• Adhere to ALL Safety Advices in this manual.
• NEVER overexert yourself or others when using the device.

Our video tutorials for you!
Assembly, use, disassembly.

1. Scan the QR code
2. Watch videos
3. Start fast and safely

Link to the videos:
https://service.innovamaxx.de/dft100_video

We are also on social media!
Get the latest product information, training content and much more on our: Instagram-page Facebook-page

https://www.instagram.com/sportstech.de https://www.facebook.com/sportstech.de

IMPORTANT SAFETY INSTRUCTIONS

It is essential to fully observe this safety information when using this product. Read all instructions thoroughly before using the product.

DANGER: To reduce the risk of electric shock, unplug the product after use, during assembly or disassembly, and for maintenance or cleaning purposes. Ignoring this notice could result in physical harm or damage to the product.

WARNING: To reduce further sources of danger, please carefully observe the following information:

• Do not leave the device unattended as long as it is connected to the mains. First press the power circuit breaker on the back before pulling out the power cord.
• Stop the device before you touch the power switch, pull the power plug or fold the device up.
• The device may only be used for the stated purpose. Improper use is not permitted.
• Never use the device if the power plug is damaged, the device is not working properly or has been exposed to moisture. In this case, contact your dealer.
• Do not carry out any changes or maintenance steps on the device that are not described in these instructions. This can damage the device.
• Make sure that the room in which the device is located is adequately ventilated and that the motor compartment of the device has sufficient circulating air.
• Do not use the device outdoors.
• Do not use the power plug to pull and move the device.
• Elderly or physically disadvantaged people should only use the device under supervision if intervention by a supervisor is necessary.
• To avoid damaging the device, do not use sprays or aerosol products near the device.
• Keep the device dry and away from moisture and humidity.
• The motor cover can heat up during use. Place the device on a heat-resistant surface.
• Keep the power plug and the power cord away from hot surfaces.
• Set up the device on a firm, level surface with a sufficient safety radius (see „Setting up the device“). Make sure that there are no objects in the immediate vicinity of the device while it is in use, as these may be the cause of injury.
• Only one person may stand on the treadmill while it is being used.
• Wear comfortable and appropriate clothing during use. Do not use the device wearing just socks or barefoot. Always wear suitable sportswear. Do not wear clothing or objects that are loose or that could get caught in the device. Keep clothes or towels away from the device‘s running belt.
• Always wear suitable sports shoes with high slip resistance. The use of shoes with heels, leather soles or running shoes with spikes is prohibited. Make sure that the shoes are free of dirt and that the laces do not touch the running belt.
• Use the side handrail for support during training.
• The device may only be used with a voltage of 220-240 V 50 Hz in earthed sockets. No connector leads may be used.
• Do not wear jewelry while exercising. Keep your hands away from the running belt and other moving parts during use to avoid injury.
• CAUTION: Always make sure that your arms and legs as well as (small) children, pets or other objects do not get under the running belt at the rear end of the device during operation to avoid possible serious injuries or damage to the device.
• Never get off the device while the running belt is moving. Switch off the device beforehand and hold on to the side handrail when descending.
• Do not place the device on a carpet that is higher than the running surface or the folding mechanism.
• WARNING: Consult a doctor before exercising. This note must be observed by the elderly or people with limited health. Read all the safety instructions in this manual carefully before using the device.
• The use of the device under the influence of alcohol, drugs or narcotics is strictly prohibited.
• This device must not be used by persons (including children under the age of 14) who have physical or mental limitations or who do not have sufficient experience to use it.
• Not to be used for medical purposes.
• CAUTION – RISK OF INJURY – To avoid injury, do not start the device until you are on the running belt. First let the running belt run at low speed and hold onto the side handrail for safety. Always make sure you have a secure footing and only adjust your speed gradually when you feel safe.
• Do not choose a speed that is physically or muscularly overwhelming for you.
• Do not stand still with the running belt switched on and do not run sideways or backwards.
• Never jump forward.
• Always put the safety clip on your clothing so that you can stop the device in an emergency.
• Before switching on, check that the running belt is adequately lubricated and tensioned.
• The running belt must run in the middle. Make sure that all visible screws are tightened.
• If the power plug is damaged, it must be replaced by qualified personnel.
• Never switch on the device when it is folded.
• Always walk towards the console, never backwards on the device.
• The device is intended exclusively for private home use and not for commercial purposes.
• Place and use the device on a dry, level and non-slip surface with sufficient clearance on all sides (see „Setting up the device“).
• Do not place the device on a surface if it would block ventilation openings.
• To protect the floor or carpet from damage or discoloration, you should place a special floor protection mat under the device.
• The maximum user weight is 100kg.
• Children under 14 years of age must not use the device under any circumstances.
• Keep children under the age of 14 and animals away from the device.
• Pets and children under the age of 14 must keep a safety distance of 3 meters from the device. Do not leave them unattended near the device.
• Children under the age of 14 should never play in the vicinity of the device or with the device itself.
• Cleaning and maintenance of the device must not be carried out by children under 14 years of age.

WARNING: Consult a doctor before exercising. They can better assess whether you are physically able to use the device or healthy enough to use it. This instruction must be observed by the elderly or people with reduced health. Read all the safety instructions in this manual carefully before using the device.

CONFIGURATION LIST

TECHNICAL PARAMETERS

EXPLODED DRAWING/SPARE PARTS LIST

At the following link you will find the exploded drawing and the spare parts list https://service.innovamaxx.de/dft100_spareparts

SETTING UP THE DEVICE

Set up the device on a level surface and pay attention to the surrounding clear space:

1. There must be at least 2 meters of free space at the rear of the device.
2. There must be at least 1 meter of free space on both sides of the device.
3. There must be at least 30cm of free space at the front of the device to allow the device to be folded up and the power cord to be routed safely.

Do not place the device in front of fume cupboards or ventilation systems. Do not use the device in a garage, covered courtyard, near water, or outdoors.

DANGER: While you program the device and engage in any other preparations, never stand on the running belt. Always use the side treads instead.
Never operate the device at high speed and never try to jump onto the running belt after-wards. Always increase speed gradually.

STEPS OF ASSEMBLY

Firmly tighten all component parts and pre-assembled parts! STEP 1
Push the left (03) and right (04) grip-bars up in the direction of the arrow until both have reached the fixing position.

STEP 2
Lift the grip- bar (07) in the direction of the arrow and attach the bar to the left (03) and right (04) bar using the screws (55) and washers (56) provided.

STEP 3
Use the screws and washers provided to attach the bottle holder (31) to the left and the remote control bra-cket (32) on the right side of the grip-bar (07) and tigh-ten the screws (44) well. Then insert the remote control (41) into the holder and insert the magnetic end of the Security key (69) in the designated location (33).

FOLDING INSTRUCTION

Before transport or folding, the device must be disconnected from the power and cables must be removed from the device! STANDING UPRIGHT/ TRANSPORTING
To stand the treadmill upright, grasp the rear end of the treadmill and lift it up so that you can transport the device on the front rollers. Hold the treadmill firmly with
one hand and grasp the support frame with the other.
Pull it up slightly so that it disengages and tension on the suspension arises.
Now fold the support frame down until it snaps back into place. Make sure that the support frame is fully engaged before you use the treadmill Ready to go!

LOWERING
To lower the treadmill, hold the top of the machine firmly with one hand and grasp the support frame with the other. Press the support frame down so that it disengages and tension is created on the suspension. Now pull it up until it is fully engaged again and has reached the original position before you lower the treadmill again.

STORAGE

Store the device in a clean and dry environment indoors. Never store the device outdoors. Make sure that the circuit breaker is switched off after use and the power plug is removed. VERTICAL STORAGE
After folding, place the machine near the wall to avoid falling down. Keep out of reach of children.

HORIZONTAL STORAGE
After folding, you can store the machine under a table or any other available space.

MAINTENANCE AND CARE

General maintenance and care will help to maintain the life and performance of your treadmill. Keep the unit clean by dusting the components on a regular basis. Clean both sides of the running belt to prevent dust from accumulating underneath the belt. Keep your running shoes clean to avoid the running board and belt getting dirty. Clean the surface of the running belt with a clean damp cloth.

It is recommended that the machine is powered off for 10 minutes after 2 hours of continuous use and completely powered off whilst not in use.
A loose running belt can result to the runner sliding off while running. If the running belt is too tight it will decrease the motors performance and also create more friction between the roller and running belts.

CENTERING THE RUNNING BELT:
Place the treadmill on a level surface and set it to a maximum of 3.5 km/h to check if the rotating treadmill is slipping. Make the necessary settings on the adjusting screws for treadmill alignment (at the rear end of the device).

When the running belt moves to the right:

1. Turn the right adjusting screw ½ turn clockwise.
2. Then turn the left adjusting screw ½ turn counterclockwise.
3. Now check whether the running belt is properly centered. If not, repeat this step.

When the running belt moves to the left:

1. Turn the left adjusting screw ½ turn clockwise.
2. Then turn the right adjusting screw ½ turn counterclockwise.
3. Now check whether the running belt is properly centered. If not, repeat this step.

LUBRICATE THE TREADMILL

IMPORTANT: To carry out the following work steps, make sure that the treadmill has been successfully disconnected from the circuit and is switched off. Failure to observe this may result in considerable risk of injury!

• You must lubricate your treadmill before using it for the first time!
• Use the supplied silicone oil in the correct dosage.
• The lubrication of the running bell is an important factor, the friction that occurs affects the life and functions of the treadmill. It is recommended to regularly check and maintain the treadmill.
• To do this, be sure to follow the instructions listed in this manual.

PERIODIC LUBRICATION CHECK

1. Carefully slide one hand between the running belt and tread deck.
   • If the hand is slightly damp and oily: the treadmill is sufficiently lubricated.
   • If the hand is dry and there are no residues of silicone oil: lubrication of the treadmill is necessary.
2. The moving parts should rotate freely and quietly.
   • Anomalies in moving parts affect the safety of the device.
   • Regularly check all screws on the device and secure / tighten them if necessary.

RECOMMENDATIONS

IMPORTANT ELECTRICAL INFORMATION

WARNING:
This treadmill needs the right power source to work properly. For your safety and the safety of others, please check that the power source is correct before connecting the device. Any power source that is stronger or we-aker than the prescribed value can cause significant damage to the device and / or the user.

GROUNDING METHODS:
This product must be grounded. Grounding provides the least resistance for electrical current and will reduce the risk of electrical hazards. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Ensure that the product is connected to an outlet which contains the same configuration as the plug. Do not use an adaptor for this product.
This product is only to be used with a correct circuit and a grounding plug that looks like the plug illustrated in figure A. Make sure that the product is connected to an outlet with the same configuration as the plug. Do not use an adaptor for this product.

DANGER:
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a certified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product. If it does not fit the outlet, have a proper outlet installed by an electrician.

WARNING:

1. NEVER use a ground fault circuit interrupter (GFCI) with this treadmill. Keep the power cord away from any moving parts of the treadmill including the elevation mechanism and the transport wheels.
2. NEVER operate the treadmill using a generator or UPS power supply.
3. NEVER remove any parts without disconnecting the AC power first.
4. NEVER expose the treadmill to rain or moisture. This treadmill is not designed for outdoor use, near pools or in any other high humidity environment.

FUNCTIONS

SAFETY LOCK FUNCTION:
Removing the Safety Key (No. 68) from the computer console while the treadmill is running will cause it to stop imme-diately. Once the treadmill reaches a full stop, the window display of the computer will show “- – -“ and the buzzer will beep 3 times. To start the treadmill again, insert the magnet end of the Safety Key (No. 68) into the computer console and press the START button.

POWER SAVE FUNCTION:
When the treadmill has been idle for 10 minutes, it will enter the power saving mode. While the treadmill is in this mode, the computer display will be turned off. Press any button to turn it back on.

POWER ON:
Flick the power switch to „I“ to turn on the treadmill.

POWER OFF:
Flick the power switch to „O“ to turn the treadmill off at anytime. This includes during exercise.

SAFETY NOTE:

1. We recommend that you maintain a slow speed at the beginning of a session and hold the handrails until you have become familiar with the treadmill.
2. Insert the magnet end of the Safety Key (No. 68) into the computer console and attach the opposite end (containing the safety clip on it) to your clothing before starting your workout. To end your workout, press the STOP button or remove the Safety Key (No.68) and the treadmill will stop immediately.

EXERCISE INSTRUCTIONS

GETTING STARTED

Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly.

Be aware of your body’s signals. Incorrect or excessive exercise can damage your health.

Stop exercising immediately if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, and shortness of breath, lightheadedness, dizziness, or feelings of nausea.

Get to know your treadmill. Before attempting to use the treadmill take some time to stand alongside and familiarize yourself with the controls.

1. Once you get on, you can stand with your feet on the side rails and stabilize yourself by holding onto the handrails.
2. Next, attach the clip end of the Safety Key to your clothes and insert the magnetic end of the key into the computer console.
3. Press the START button to start the machine.
4. The machine will start at the system default setting speed of 1.0 KPH. when you feel comfortable, you may slowly increase this speed.
5. When you are finished with your exercise, press the STOP button to stop the machine or you can remove the magnetic end of the Safety Key to stop the machine.

STRETCH EXERCISE

Before each workout you should stretch your muscles for at least 5-10 minutes to warm them up sufficiently. Repeat the following stretching exercises five times. Stretching before training helps improve flexibility and reduces the risk of injury.

1. HEAD ROLLS
   Rotate your head to the right for one count, feeling the stretch up the left side of your neck, then rotate your head back for one count, stretching your chin to the ceiling and letting your mouth open. Rotate your head to the left for one count, then drop your head to your chest for one count.

2. SHOULDER LIFTS
   Lift your right shoulder toward your ear for one count. Then lift your left shoulder up for one count as you lower your right shoulder.

3. SIDE STRETCHES
   Open your arms to the side and lift them until they are over your head. Reach your right arm as far toward the ceiling as you can for one count. Repeat this action with your left arm.

4. QUADRICEPS STRETCH
   With one hand against a wall for balance, reach behind you and pull your right foot up. Bring your heel as close to your buttocks as possible. Hold for 15 counts and repeat with left foot.

5. INNER THIGH STRETCH
   Sit with the soles of your feet together and your knees pointing outward. Pull your feet as close to your groin as possible. Gently push your knees toward the floor. Hold for 15 counts.

6. TOE TOUCHES
   Slowly bend forward from your waist, letting your back and shoulders relax as you stretch toward your toes. Reach as far as you can and hold for 15 counts.

7. HAMSTRING STRETCHES
   Extend your right leg. Rest the sole of your left foot against your right inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts. Relax and then repeat with left leg.

8. CALF / ACHILLES STRETCH
   Lean against a wall with your left leg in front of the right and your arms forward. Keep your right leg straight and the left foot on the floor; then bend the left leg and lean forward by mo-ving your hips toward the wall. Hold, then repeat on the other side for 15 counts.

FUNCTION OF THE CONSOLE

TURN ON THE DEVICE

1. To start the device, first establish a power connection.
2. Now press the power switch on the front end of the treadmill to „I“. If the device is switched on, the buzzer sounds four times.

ACTIVATE THE REMOTE CONTROL AND START THE TREADMILL
Attach the magnetic end of the Safety key on the grip-bar. The LED display switches to ope-rating mode.
Now press the START button on the remote control. The LED display shows a countdown of 5 seconds and the buzzer sounds.
After the countdown ends the treadmill starts to run with an initial speed of 1km/h.

FUNCTION KEYS:

1. SPEED BUTTONS +/-: As soon as the treadmill is running, press the +/- buttons to increase or decrease the speed in 0.1km/h increments. Pressing and holding one of these buttons for more than ½ second increases or decreases the speed continuously.
2. STOP: To stop the treadmill, press the STOP button. The device comes to a standstill and all data is reset to the basic setting. Alternatively, you can also pull out the safety key to bring the device to an abrupt stop.

LED-DISPLAY:
The integrated LED display shows – from left to right – the calories burned (CAL), the previous time and – alter-nating every 3 seconds – the distance traveled (DISC) and the current running speed (km/h).

The speed range of the treadmill is between 1-8 km/h, where 1 km/h is the starting speed and 8 km/h is the maxi-mum speed.

REMOTE CONTROL, APP AND BLUETOOTH:

• REMOTE CONTROL: You can control the device using the supplied remote control using the function keys mentioned above.
• APP: You can also control the device using the fit show app to start and stop the treadmill via your app or to regulate the speed.
• BLUETOOTH MUSIC FUNCTION: Start the treadmill and activate the Bluetooth function on your mobile de-vice. Search for your treadmill via Bluetooth and establish a connection to „RZ_Media“ or „FS-208CD4-A“. You can then play your music on the treadmill.

STANDBY MODE:
If the treadmill is in operation for 10 minutes without using it, the device automatically switches to standby mode and darkens the LED display. Press any key to turn the display back on and exit standby.

TROUBLESHOOTING

** Faulty communication between controller and electronic measuring unit after switching the device on.| Stop the device to access the error mode. The device can no longer be started. The buzzer sounds 9 times and the error code is displayed. Check the connection between the controller and the electronic measuring unit and make sure that all cables are properly connected. If the cabling is damaged, it must be replaced by specialist personnel.
E2| The controller cannot recognize the motor‘s voltage.

No speed sensor signal: Despite the voltage output from the controller to the DC motor, the speed feedback from the motor cannot be received for longer than 3 seconds.

|

1. Check that the motor wires are properly connected to the controller.

2. Stop the device to access the error mode. The buzzer sounds 9 times and the error code is displayed. If the system goes into standby mode after about 10 seconds, a restart can be carried out.
   Possible reasons: If the signal from the speed sensor is not received for longer than 3 seconds, check whether the sensor plug is properly inserted or is damaged; a damaged sensor plug must be replaced by specialist personnel.

3. Stop the device to access the error mode. The buzzer of the electronic counter sounds 9 times and the error code is displayed. If you can return to normal and go into standby after stopping, then a normal start can be carried out.
   Possible reasons: Check if the motor wires are properly connected. Check whether the controller emits an abnormal smell and have it replaced by specialist personnel if necessary.

E4| Tilt motor correction failure or malfunction| Turn the device off and on again. Check the operation of the tilt motor again.

If necessary, have the inverter replaced and check the function again. If necessary, have the tilt motor replaced and check the function again.

E5| Overcurrent protection: In the operating state, the controller continuously detects a motor DC current of more than the value of the nominal current + 6A for more than 3s.| Stop the device to access the error mode. The buzzer of the electronic counter sounds 9 times and the error code is displayed. If the system goes into standby mode after about 10s, a restart can be carried out.

Possible reasons: The system‘s self-protection is triggered in the event of excessive current flow, which is caused by the excessive load exceeding the nominal value or by a blockage of the treadmill, which prevents the motor from rotating.

E5| Overcurrent protection: In the operating state, the controller continuously detects a motor DC current of more than the value of the nominal current + 6A for more than 3s.| Turn off the device and restart it.

Also check whether there is an overcurrent or smell of fire when the engine is running. If necessary, have the motor replaced. Check whether the controller emits an abnormal smell; if so, have it replaced. Check whether the mains voltage is inconsistent or too low and use the correct mains voltage for a new test.

E6| Explosion protection: Unusual mains voltage or motor failure will damage the drive motor circuit.| Stop the device to access the error mode. The buzzer sounds 9 times and the error code is displayed. If the system goes into standby mode after about 10s, a restart can be carried out.

Possible reasons: Check whether the mains voltage is less than 50% of the normal value. Ensure the correct voltage and test the device again.

Check whether the controller emits a burning smell; if so, have the controller replaced. Also check that the motor wires are properly connected.

E7| Security key not in position| Place the security key in the correct position.

If necessary, have the security key replaced and reconnect it to the device.

IMPORTANT MATTER

WARNING

• Please consult your doctor and receive complete physical examination before using the product. Don’t carry out frequent and violent exercise without permission of doctor. Please stop using the product and consult your doctor if you feel unwell in use. The product shall be used correctly. Please read service manual in detail before exercise.
• Please keep children and pets away if the product is unattended or idle.
• Please wear suitable clothes including sneakers. Please don’t loosen your clothes in exercise to prevent them from being hooked by the machine.
• Ensure that all bolts and nuts are tightened when using the equipment.
• Regularly maintain the treadmill to keep it in good condition.

BEFORE USE
How to start exercise plan depends on your physical condition. If you have not exercised for years or you are seriously overweight, you must gradually increase exercise time, such as a few minutes every week.

At the beginning you may only exercise for a few minutes in target heart rate scope. Anyway, your aerobic fit-ness will be improved in about 6-8 weeks. Don’t lose heart if it takes more time. It is very important to exercise at your own pace. Some day you will be able to exercise continuously for 30min.

1. Please consult your doctor before exercise or training. Ask the doctor to inspect your training and diet plan and give suggestions on your exercise plan.
2. Set exercise goal after consulting with your doctor to ensure that the plan is practical, and start exercise plan at leisure.
3. You can add some aerobic exercises into exercise plan, such as walking, jogging, swimming, dancing or riding. Test pulse frequently. If you have no electronic heartbeat monitor, consult the doctor about how to correctly measure pulse with hand from wrist or neck. In addition, you must set target heart rate on the basis of age and physical condition.
4. Drink enough water in exercise. You must supplement water lost due to over exercise to prevent dehydration.
5. Don’t drink a great deal of ice water or beverage. The temperature of drinking water or beverage shall be room Temperature.
6. Target heart rate.

MEASURE PULSE
To determine whether your heartbeat is in target heart rate scope, first you must know how to measure heart rate. The simplest way is to measure pulse of carotid arteries between trachea and neck muscles on both sides of neck. Count number of beats of pulse in 10s and multiply the number of beats by 6 to obtain heartbeat per minute.

You can download the app using the QR codes shown here or search in your store. Minimum compatibility specifica-tions for mobile device; android 5.0 or higher with Bluetooth 4.0, iOS 8.0 or higher.

Notes on using the App:
You should only install apps from sources you trust. Sportstech Brands Holding GmbH cannot accept any liability for software provided by third parties.

Please remember to turn on the Bluetooth feature on your device.

The QR code at the beginning of the manual will guide you to various YouTube tutorials. There you can access more information about the App and the device.

DISPOSAL

Dear customers,
As an end user, you are legally obliged to collect waste electrical and electronic equipment and batteries as well as accumulators separately from municipal waste. We want to make this as easy as possible for you. Please note the information on this page and on the back.
Notes on EU directive 2012/19/EU (in Germany implemented in ElektroG (Law about electric and electronic devices); elsewhere implementation may differ)

We advise owners of electric and electronic equipment that waste electrical and electronic equipment must be collected separately from municipal waste in accordance with the applicable legal regulations. The symbol of a crossed-out garbage can, which is shown on waste electrical and electronic equipment, also indicates the obligation to collect this waste separately.

B. Notes on disposal and symbols for an electrical appliance based on EU Directive 2006/66/EU (in Germany in accordance with the Battery Act (BattG); elsewhere, implementation may differ)

Old batteries and accumulators must not be disposed of with household waste. As an end user, you are legally obliged to return used batteries. The symbol with the crossed-out garbage can means that you are not allowed to dispose of old batteries in the household waste.

Use the official collection points for this, such as the collection points of public waste disposal carriers. You can also return used batteries to retail outlets, provided they sell batteries. If the symbol Cd, Hg, or Pb is displayed under the symbol of the crossed-out garbage can, this is an indication that the battery contains either cadmium, mercury or lead. These are toxic heavy metals that not only pose significant risks to the environment but also to human health.

**** Packaging material can be conveyed back to the raw material cycle. Dispose of packaging material in accordance with legal provisions. Information can be retrieved from the return or collections systems of your community.

Information about included batteries

Information according to § 4 paragraph 4 Elektrogesetz

Information on the safe removal of the batteries or accumulators

• Open the battery cover on the back of the device. To do this, turn the battery cover slightly to the left, e.g. using a coin.
• Remove the battery/rechargeable battery from the device.
• The battery/rechargeable battery and, if applicable, the device can now be disposed of separately at the appropriate official collection point. Please also note the locally applicable regulations.

References

• appareil.de
• Fitnessgeräte für Zuhause online bestellen | SPORTSTECH
• Entsorgung | SPORTSTECH
• DFT100 05062020
• redirecting
• Instagram

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>