Dongguan Maijia Intelligent Technology US-SS01 Smart Switch User Manual
- June 5, 2024
- Dongguan Maijia Intelligent Technology
Table of Contents
Dongguan Maija Intelligent Technology
US-SS01 Smart Switch
User Manual
Download Smart Life App
Confirm that you have downloaded the right Smart Life App (The same Logo as
the right side). If not, download it from the links
iPhone: https://itunes.apple.com/us/app/smart-life-smart-
living/id1115101477?mt=8
Android:
https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=en_US
Set the Switch to Easy Pairing Mode
After wiring, you will see a red indicator on the switch. If not, press the
tiny restart button.
Press and hold the power button for 5-8s until the red indicator blinks
quickly.
If the above pairing method failed several times, please go to the AP mode mentioned incoming pages
Step 1: Set the switch to AP mode
- Press and hold the power button for 5-8s until the indicator blinks quickly.
- Press and hold the power button for 5-8s until the indicator blinks slowly.
Step 2: Pair the switch on SmartLife App (AP mode)
Then, Connect the Hotspot from the Switch — > Back to App for pairing.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.