iRobot m601220 Ultimate Robot Mop Instruction Manual
- June 9, 2024
- iRobot
Table of Contents
iRobot m601220 Ultimate Robot Mop
About your Braava jet® m6 Robot Mop
Top View
Accessing the Tank
Bottom View
Home Base Charging Station
GETTING STARTED
-
Get ready
To start, you’ll need your robot, charging station, drip tray, and power cord. -
Position the charging station and plug in
Choose an area near an outlet with good Wi-Fi coverage.
Plug the power cord into the charging station, and then into the wall. -
Attach the drip tray
Place the drip tray onto the front of the charging station. -
Wake up your robot
Slide your robot onto the charging station contacts to activate the battery. The light ring will light up and after a few minutes, and a sound will let you know it’s awake. -
Connect and update
Connect your robot to the iRobot HOME App to allow remote control, cleaning customization, and to keep robot software up to date. -
Attach a cleaning pad
Slide a wet mopping or dry sweeping pad onto the underside of the robot.
Detach an existing cleaning pad by pressing the button on the front of the robot.
Cleaning pad types Wet Mopping Pads Single Use Wet Mopping Pad Washable
Wet Mopping Pad (Microfiber)
Dry Sweeping Pads Single Use Dry Sweeping Pad Washable Dry Sweeping Pad (Microfiber)
Fill the tank Remove the tank from the robot. Add Braava jet® Hard Floor Cleaning Solution (if using). Then fill to top with water.
Cleaning Solution
When wet mopping, you may add Braava jet® Hard Floor Cleaning Solution to the
tank before adding water. This product is a concentrate that is suitable for
all well-sealed hard floors.
Important: Braava jet® Hard Floor Cleaning Solution is the only solution
that can be safely used in your robot mop. Please do not use other cleaning
solutions.
Using Your Braava jet® m6 Robot Mop
Cleaning
Use your robot frequently to maintain well-conditioned floors.
-
Your robot will automatically explore and clean your home, moving in a methodical manner across the floor, with some overlap from one pass to the next to ensure that every spot on the floor is cleaned three times. If you are looking for a quicker clean or a deeper clean than this default setting, or if you want to adjust the amount of water sprayed, you can change your cleaning preferences from the iRobot HOME App.
-
Your robot will return to the charging station at the end of a cleaning job, whenever it needs to recharge, or when the tank needs to be refilled.
Note: If the “CLEAN” text is pulsing while charging, your robot is in the middle of a cleaning job and will automatically resume where it left off once recharged. -
To send the robot back to its charging station, tap (home). A blue light ring pattern will indicate that the robot is seeking the charging station. This feature will only work if your robot started the job from the charging station.
-
When the robot senses its tank needs to be filled, the light ring indicator will illuminate in a red sweeping motion toward the lid latch.
-
Clean smaller designated areas (3.3 ft2 /1 m2) by placing your robot at the bottom center of the space you’d like to focus on. Tap (spot clean) to start cleaning.
Tips for Optimizing Performance
- Your robot works best when used with the iRobot HOME App.
- For optimal mopping performance, we recommend that you vacuum first to pick up large dirt and debris before running Braava jet®.
- Your robot will only run with Braava jet® m Series pads, which are made specifically for Braava jet® m Series robots.
- Use a new pad for each cleaning job, and do not pre-wet the pads prior to use.
- Keep your charging station plugged in and the area around it clear of clutter.
- You can use a Dual Mode Virtual Wall® Barrier to help keep your robot in places you want to be cleaned, and out of the ones you don’t. (Sold separately)
- Within the iRobot HOME App, you can adjust cleaning preferences to modify cleaning power, speed, and coverage.
Charging
-
Slide your robot onto the charging station contacts to activate the battery.
Note: Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job. -
The light ring indicator will show the current charging status. This will turn off after 1 minute to save power, but can be shown again if you press CLEAN. This can also been seen in the iRobot HOME App.
-
Your robot uses a small amount of power whenever it is on the charging station. You can put the robot in a further-reduced power state when not in use. For instructions and more details on this Reduced Power Standby Mode, refer to the iRobot HOME App.
-
For long-term storage, turn off your robot by removing it from the charging station and holding down (home) for 10 seconds. Store your robot in a cool, dry place.
Lithium Ion Battery
For best results, only use the iRobot Lithium Ion Battery that comes with your Braava jet® m6.
WARNING: Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations. If you need to ship this product (with the battery included) for service, travel or any other reason, you MUST follow these shipping instructions.
- Battery MUST be turned off before shipping.
- Turn off the battery by removing the robot from the charging station and holding down (home) for 10 seconds. All indicators will turn off.
- Package the product in its original packaging.
- Ship via ground transportation only (no air shipping).
- If you need further assistance, contact our Customer Care team.
Troubleshooting
- Your robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press CLEAN for details. Further support and instructional videos are available in the iRobot HOME App.
- After 90 minutes of inactivity off the charging station, your robot will automatically end its cleaning job.
Care and Maintenance
-
Cleaning the Sensors and Pad Reader
Clean sensors on the bottom of your robot with a damp cloth.
Important: Do not spray cleaning solution or water onto the sensors or sensor openings. -
Cleaning the Wheels
Pull off any visible debris or hair that gathers around the wheels. -
Cleaning the Body of the Robot
Wipe clean with a damp cloth.
Cleaning the Tank
If you notice an odor from the tank
- Remove the tank from your robot mop.
- Fill the tank with warm water. Do not use boiling water.
- Close cap and lightly shake the tank.
- Rinse the tank and repeat as necessary.
Cleaning the Drip Tray
- Remove the robot from the charging station.
- Separate the drip tray by lifting it up from the charging station.
- Clean the drip tray with a damp cloth or with warm water in sink.
- Dry thoroughly before reattaching the drip tray to the charging station.
- Put your robot mop back onto the charging station.
Caring for Washable Cleaning Pads
Note: You can clean your washable pads two ways: either by hand washing, or in a washing machine.
Hand Washing
Thoroughly wash the pad with warm water.
Machine Washing
Wash using the warm cycle, then air dry. Do not put in dryer. Do not wash with delicate.
iRobot Customer Care
USA & Canada
If you have questions or comments about your Braava jet® robot mop, please
contact iRobot before contacting a retailer.
You can start by visiting www.irobot.com for support tips, frequently asked
questions and information about accessories. This information can also be
found in the iRobot HOME App. If you need further assistance, call our
Customer Care team at 877-855-8593.
iRobot Customer Care Hours
- Monday to Friday, 9AM – 9PM Eastern Time
- Saturday and Sunday 9AM – 6PM Eastern Time
Outside USA & Canada
Visit www.global.irobot.com to:
- Learn more about iRobot in your country.
- Get hints and tips to improve your Braava jet® robot mop’s performance.
- Get answers to questions.
- Contact your local support center.
Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
- Changes or modifications not expressly approved by iRobot Corporation could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules as well as ICES-003 Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-nications. However, there is no guarantee that interference to radio communication will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than the necessary for successful communication.
- FCC Radiation Exposure Statement: This product complies with FCC §2.1093(b) for portable RF exposure limits, set forth for an uncontrolled environment and is safe for the intended operation as described in this manual.
- ISED Radiation Exposure Statement: This product complies with the Canadian Standard RSS-102 for portable RF exposure limits, set forth for an uncontrolled environment and is safe for the intended operation as described in this manual.
©2019 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730 USA. All rights
reserved. iRobot, Braava jet, and Virtual Wall are registered trademarks of
iRobot Corporation, in the United States and other countries. App Store is a
trademark of Apple, Inc., registered in the U.S. and other countries. Google
Play is a trademark of Google, Inc. Wi-Fi and the Wi-Fi logo are registered
trademarks of Wi-Fi Alliance.
For battery recycling go to call2recycle.org; or call
1-800-822-8837
FAQs
How effective is robot mop?****
In all honesty, no. A robot mop will never be able to clean as effectively as you and your old upright vacuum, just like a robot vacuum will never be able to. A robot vacuum/mop combination will make your life easier and reduce how frequently you need to mop manually, but it won’t completely replace hard work.
Can I use vinegar and water in iRobot mop?****
As vinegar can harm the robot’s internal mechanisms, it is not permitted to use it as a cleaning agent in any Braava product.
Can robot vacuum mop at the same time?****
To use the SpinWave as both a vacuum and a mop, you’ll need to switch out the tanks (the robot comes with a dry tank for vacuuming and a wet tank for mopping). You cannot simultaneously perform both as you can with some more expensive ones (though it does pick up some solid debris while mopping).
Can you put cleaning solution in robot mop?****
We advise against using a disinfectant cleaner in a robot mop based on experience. It would be best to only add water to your robot mop if the cleaning solution wasn’t already included.
Do cleaning robots use a lot of electricity?****
Robotic vacuum cleaners consume less electricity per hour than manual vacuums, which is why they are referred to as “energy-saving” equipment.
Can I put soap in robot mop?****
Your robot mop shouldn’t have any extra parts added, either. If your robot mop comes with a cleaning solution, you can follow the instructions that came with your device to combine it with water inside the tank. Any deviation from these guidelines could result in internal robot mop component damage.
What liquid goes in iRobot mop?****
Inside our Braava jet® Robot Mop Models, it is advised to use water and the Braava jet® Hard Floor Cleaning Solution. Two (2) Capfuls of cleaning solution mixed with water for the Braava Jet® 240.
How often do you use a robot mop?****
The most advised timetable will prevent you from prematurely wearing out your smart mop and is weekly or biweekly. The majority of robot mops can be anticipated to survive between four and six years with regular maintenance, however they will ultimately need to be repaired and replaced.
Can I use my robot vacuum everyday?****
The majority of owners think that vacuuming the floors with their robot vacuums four times per week is enough to keep the floors free of dust. However, you should use your robot vacuum more frequently if you have kids or pets. You should vacuum every day if you have seasonal allergies.
Does the robot mop avoid carpet?****
It rarely gets stuck and can detect and automatically avoid carpets.
How do you clean robot mop pads?****
Air drying and hand cleaning are advised. When washing clothes in a machine, use the warm cycle and let them air dry.
Can I put soap in robot vacuum?****
It is not advised that you fill the vacuum tank with anything other than water. The tank was created by the maker of Dreame robot vacuums to hold a neutral solution, like water. The tank will corrode internally as a result of the acidic antibacterial cleaners, eventually developing holes that will let water leak into the mortar.
Can you use water in iRobot mop?****
It is not advised to use anything other than water to fill the vacuum tank. The tank was designed by the company that makes Dreame robot vacuums to store an impartial substance, such as water. The acidic antibacterial cleaners will cause the tank to corrode internally, eventually developing holes that will allow water to flow into the mortar.
Can you put bleach in iRobot mop?****
Water, Bona floor cleaning, and Clorox Ready Mop are permitted for use with the Braava, according to iRobot. Bona is what I use, and it works great. It is not advisable to use anything soapy, waxy, or harsh (such as bleach or ammonia).
Can you put any cleaner in iRobot?****
No, iRobot does not advise using any other cleaning solution other the one they give. You have two options for the cleaning agent: water and iRobot’s.
Can I use vinegar in my robot mop?****
Because the vinegar gradually eats away at the adhesive holding the wheel tread to the wheels, iRobot does not advise it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>