SW-MOTECH KFS.01.979.10000/S Fender Kit Silver Honda Instruction Manual
- June 3, 2024
- SW-MOTECH
Table of Contents
ANBAUANLEITUNG
mounting instructions
KFS.01.979.10000/S
contains
KFS.01.979.80000/B
Mounting kit for fender
Thank you for choosing this premium product from SW-MOTECH.
Please carefully read and understand all instructions, safety messages and
warnings in this mounting instructions prior to installation and use of this
product to avoid injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our web shop for additional information, such
as application charts and PDF mounting instructions. Any other documents that
may be required (e.g. ABE certifications), are also available for download at
our web shop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
This safety alert symbol is used throughout these mounting instructions to
warn of the possibility of death, bodily injury or other warnings. The words
DANGER, WARNING and CAUTION are used with this safety alert symbol to convey
important safety messages and information related to the installation and use
of this product. These words along with the safety alert symbol mean:
DANGER: Indicates a hazardous situation that, if not avoided, will result in
death or serious injury!
WARNING: Indicates a hazardous situation that, if not avoided, could result in
death or serious injury!
CAUTION: Indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury!
NOTICE: important information, but not death or injury related (property
damage only)!
WARNING: The installation and/or maintenance of this product requires
advanced mechanical skills, the proper tools, and a thorough understanding of
tool use and torque specifications.
For your own safety, SW-MOTECH recommends having installation and/or
maintenance carried out by a qualified and certified motorcycle mechanic.
WARNING: Should you choose to self-install this product, carefully and
completely read all intallation and safety instructions before installation
and use, and follow all the directions and safety precautions given in the
mounting instructions to avoid serious injury or death. Also pay attention to
all relevant information in the vehicle manual during intallation and use.
IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED
CLARIFICATION OF ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT
CONTACTING SW-MOTECH FOR ASSISTANCE.
PREPARATION: Read the mounting instructions carefully and make sure that all
items of the parts list are included.
CAUTION: Make sure that your vehicle is parked safely and cannot fall
over. Turn off the engine and remove the ignition key. Let the engine/exhaust
cool off if necessary. Disconnect the vehicle battery when working on the
electrical system. Use appropriate tools and wear always safety glasses and
hand protection. Have another person help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturer specifications or
replaced by parts and hardware delivered by SW-MOTECH.
WARNING: Secure all threads, unless otherwise specified, with medium-
strong strength liquid thread locker. Torque specifications undefined by SW-
MOTECH must be obtained from the vehicle manufacturer or by a certified
motorcycle workshop!
FUNCTION CHECK: After installation also make sure that no moving parts
are obstructed, and function of the vehicle is not hindered in any way. Cables
and hoses must not rub and/or be pinched.
WARNING: Before starting to ride, perform a comprehensive check of all
functions. After the first 50 km and then at regular intervals, check the
tightening torque of all connections and the proper fit of the product.
Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST
READ AND SAVE THESE MOUNTING INSTRUCTIONS
Step| No.| Item No. / Descriptions| Part| Quantity|
N m
---|---|---|---|---|---
3| (1)| KFS.01.979.001R| Mounting Bracket; right| 1 ii|
| (2)| M6 x 25; ISO 7380| Lensehead Screw; black| 1 /1| 9
(3)| 014/06,2/011| Spacer; black| 1 n|
(4)| M6; DIN 6927| Lock Nut with Flange; black| 1 /2|
(5)| KFS.01.979.003| Reflector Bracket, right| 1 ti|
(61| M6 x 16; ISO 7380| Lensehead Screw; black| 2 /4| 9
| | | |
4| (7)| KFS.01.979.001L| Mounting Bracket; left| 1 ti|
| (8)| M6 x 20; ISO 7380| Lensehead Screw; black| 1 ti| 9
(9)| M6; DIN 6927| Lock Nut with Flange; black| 1 /2|
(10)| KFS.01.979.002| Reflector Bracket; left| 1 /1|
(11)| M6 x 16; ISO 7380| Lensehead Screw; black| 2 /4| 9
| | | |
5| (12)| M5 x 8; ISO 7380| Lensehead Screw; silver / black| 4 /a| 5,5
Note: a All measurements in millimeters. b The second number indicates
the total quantity of the part in the delivery.
c No torque specifications: Use the torque defined by vehicle
manufacturer!
The standard torque in this table can be used as long as it is within the
vehicle manufacturer’s specifications.
MOUNTING
WARNING: Always wear eye and hand protection!
WARNING: Always use appropriate tools!
Loosen the nuts on both sides of the vehicle to remove the brake hoses. Also
loosen the hose plug from the reflector bracket.
Remove the screws from the shown mounting points.
Remove the reflectors on both sides from their mounting brackets.
NOTICE: Protect the insides of the fork with tape when removing the
fender.
Loosen the screws on both sides of the vehicle and remove the fender from the vehicle.
Attach the reflectors (Orig) with the original nuts [Orig.] to the reflector
brackets (5) and (10), as shown in the detail drawing.
Tighten the nuts (Orig.) with the manufacturers specified torque.
Attach the mounting bracket (1) and the reflector bracket (5) on the right
side to the vehicle.
WARNING: Use liquid thread locker for the two lower screws!
Do not fully tighten the screws yet.
Attach the mounting bracket (7) and the reflector bracket (10) on the left side to the vehicle.
WARNING: Use liquid thread locker for the screws (11)!
Do not fully tighten the screws yet. Insert the hose plug, that was removed in
step [1] into the opening of the reflector bracket (10).
NOTICE: Choose the screws [12] according to the color of your fender
{sold seperately].
Attach the fender [*) on both sides of the vehicle to the mounting brackets.
Position the hoses over the fender.
WARNING: Use liquid thread locker!
Align the fender to the tire. Once all parts are aligned without excess
tension, tighten the screws as specified.
PRODUCT SPECIFIC INFORMATION
NOTICE: Observe the country-specific regulations concerning vehicle registration/operation as wellas TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
SW-MOTECH GmbH & Co. KG
Ernteweg 7-10 35282 Rauschenberg Germany
Tel. /phone + 49 (0)6425 / 8168 – 050
Fax / fax + 49 (0)6425 / 8168 – 10
info@sw-motech.com
www.sw-motech.com
Copyright by
SW-MOTECH GmbH & Co. KG
Errors and omissions excepted. Technical and design modifications are subject
to change.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>