JENSEN Digital Media Receiver MPR2110 User Guide

MPR2110
QUICK START GUIDE
Digital Media Receiver

Installation

Before You Start

• Consult a qualified technician for instructions. Jensen always recommends professional installation.
• Disconnect negative battery terminal.
• Insert the removal keys. and remove the mounting sleeve from the head unit.

Installation Process

1. Carefully remove the existing head unit. (if applicable)
2. Connect wiring harness. Consult a qualified technician if you are unsure.
3. Mount the head unit using the mounting sleeve.
4. Connect wiring harness and antenna. Test the head unit for correct operation.
5. Slide the radio into the mounting sleeve to secure the radio.
6. Snap silicon caps into place.

Wiring Connections

The chart below the connection for each wire in the wiring harness.

Tip: When a suitable ground wire is not present in the vehicle wiring harness, connect the black ground wire to the vehicle chassis.
Fuse: When replacing the fuse, make sure the new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio.

Mounting the Head Unit: Typical DIN mounting
Step 1: Insert the mounting sleeve into the installation kit or dashboard.
Step 2: Bend multiple mounting tabs around the mounting sleeve until the mounting sleeve is secure.

Step 3: Connect all wiring harnesses and slide the head unit into the mounting sleeve until it clicks into place.

Step 4: Use the removal keys to remove the unit.

General Operation

Power On/Off| Press the (.5 button to turn the unit on. Press (.5 again to turn the unit off.
---|---
Changing Modes| Press MODE to select between Radio. USB. Bluetooth. AUX.
Modes of operation are shown in the display.
Volume| Adjust the volume using the volume knob.
Mute| Press Of to silence the audio. Press again to resume listening at the previously selected volume.
Auxiliary Inputs| Insert a 3.5mm cable in the unit’s front AUX port.
Reset| Press the RESET button to reset the unit back to the factory settings if an abnormal operation occurs. The reset button is located on the front panel.
Setting the Clock| With the unit on. long press DISP to display clock time. Press and hold DISP until the hours or minutes begin to flash. then release. Rotate the volume knob to adjust the time.
Long press DISP to finish the clock setting.
Display| Press DISP to toggle display between various displayed information.
Audio / Menu| Press the volume knob momentarily to select between the audio functions. Press and hold the volume knob for more than two seconds to select between the menu functions. Rotate the volume knob left/right to adjust or activate the desired function/audio.

AM/FM Tuner Operation

Then press TUNE or TUNE momentarily to move radio frequency down or up one step at a time.
Press and hold TUNE or TUNE . to advance quickly.
Band| Press BAND to select between FM1. FM2. FM3. AM1 and AM2 bands. Up to six presets can be programmed for each band, enabling up to 18 FM stations and 12 AM stations to be stored in memory.
Storing Presets| Up to 18 FM and 12 AM stations can be stored. To store a station. select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display.
Recalling Presets| Preset stations can be recalled any time by pressing the corresponding preset button.
Auto store| Press and hold MENU for more than 2 seconds, then press DISP to store 18 FM stations and 12 AM stations automatically.
Preset Scan| Touch PS to recall each preset station that has been stored in memory for each band.
(Available with the Jensen Smart Remote App only)

USB Operation

Playing MP3 Files| To play MP3 files, insert a USB device containing MP3 files.
---|---
Track Select| Press TUNE to skip to the beginning of the next song. Press TUNE to skip to the beginning of the previous song.
Fast Forward and
Reverse| Press and hold TUNE or TUNE to fast forward or reverse a track.
Pause| Press to temporarily stop playback. Press again to resume playback.
Folder Access| The folder can be found by pressing Folder Up or Folder Down. About 1 second after the folder name is displayed. the first file under the selected folder will be displayed and playback.
Repeat| Press RPT to toggle between RPT ALL and RPT ONE.
•RPT ALL – Plays all tracks on the USB device.
•RPT ONE – Continuously repeats selected track.
Random| Press RDM to play tracks in random order, press again to cancel the RDM function.
Intro| Press INT to plays the first 10 seconds of each track, press again to cancel the INT function.

Bluetooth® Operation

Preparation| Before using a Bluetooth device. it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process.
---|---
Pairing a New Device| The head unit broadcasts the pairing sign: when no devices are connected. Complete sequence from your Bluetooth device. Ref owner’s manual for your device for more details.
The device name is “Jensen Media Player”
Note : The head unit can be in any mode of when pairing is performed.
Streaming Audio Troubleshooting| The head unit supports A2DP wireless stream from a Bluetooth mobile device directly to yot The following functions can be used to contra
• Press to skip to the next available audio track.
• Press to skip to the previous audio track.
• Press to toggle between play and pa playback.

APP Operation

The Jensen Smart App is the ultimate wireless remote control for your receiver. You can download the Jensen Smart app from Apple App Store or Google Play Store and install it on your smartphone or tablet.
Please scan the following QR code to download the Jensen J-Link P2 APP to your smartphone.

Voice Activation Operation

Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button . and the receiver will switch into Bluetooth mode. This will activate Sirio or Google Assistant*” on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.

Limited One-Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Namsung America Inc. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Namsung America Inc. agrees. at our option. during the warranty period. to repair any defect in material or workmanship or to furnish an equal new. renewed or comparable product (whichever is deemed necessary) in exchange without charges. subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs. damage resulting from an accident. misuse. abuse. neglect. product modification. improper installation. incorrect line voltage. unauthorized repair or failure to follow instructions supplied with the product. or damage occurring during the return shipment of the product.
What to do? 1. Before you call for service. check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period. you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name. a return UPS shipping address (P.O. Box not acceptable). and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us toll-free at 1-888-921-6088 or by email at cs@dualay.com. Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties. expressed or implied. including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation. liability. right. claim or remedy in contract or tort. whether or not arising from the company’s negligence. actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect. incidental or consequential damages.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• this device may not cause harmful interference, and
• this device must accept any interference received. including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio technician for help.

Customer Service Toll-Free : 1-888-921-4088
www.jensenmobile.com
©2019 Namsung America Inc.

The Bluetooth” word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Siri and Apple have registered trademarks owned by Apple Inc.
Google Assistant and Android are trademarks owned by Google
Other trademarks and trade names are those of their respective owners.
NSC1019-V01

To download the complete Owner’s Manual for your radio, please visit www.dualay.com/support/manuals.php.

References

• Car Stereo - Jensen Mobile

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>