JENSEN CDR462 Bluetooth DVD Multimedia Receiver Owner’s Manual

JENSEN CDR462 Bluetooth DVD Multimedia Receiver

Product Information

Specifications

• Model: CDR462
• Type: DVD Mechless Multimedia Receiver
• Display: 6.2″ Touch-Screen
• Connectivity: Bluetooth
• Compatibility: Vehicles with 12VDC negative ground

Product Usage Instructions

Installation
It is recommended to have the JENSEN CDR462 installed by a professional installer or authorized dealer. Ensure installation is done in a vehicle with 12VDC negative ground only to prevent damage or injury.

Preparation
Ensure the unit, trim plate, and wiring are set up correctly according to the provided Wiring Diagram – Inputs/Outputs. Use the correct type and amperage fuse when replacing. Rear camera input can be utilized with a rearview camera.

Operation

• Control Locations: The device features various control locations including a microphone, microSD card slot, eject button, reset button, voice activation button, power/volume/mute button, tune/track buttons, USB port, and auxiliary input.
• General Operation: The unit can be powered on/off, volume adjusted, muted, and modes switched between Auxiliary Input, USB Input, and microSD Card. Reset the unit using the reset button if needed.
• Settings Menu: Access the Setup menu from the Main Menu screen to adjust settings related to General, Clock, Audio, Bluetooth, Display, and About. Use the touch screen for navigation and adjustment within each category.
• Touch Screen Controls: Utilize touch screen controls for functions like dimming the display, voice activation,= adjusting audio settings such as EQ, Treble/Bass, or Balance/Fader.

FAQ (Frequently Asked Questions)

• Q: Can video playback operate while the vehicle is moving?
  A: No, video playback is disabled while the vehicle is in motion to prevent driver distraction. It only operates when the vehicle is in Park with the parking brake engaged.

• Q: What should I do if the unit is not functioning properly?
  A: If the unit is inoperable or experiencing abnormal operation, press the reset button using the tip of a pen to reset the main processor to default settings.

CDR462

DVD Multimedia Receiver with Bluetooth featuring a 6.2″ Touch-Screen Display

INSTALLATION & OWNER’S MANUAL

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Copyright and Trademark
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. microSD Logo is a registered trademark of SD-3C, LLC.
Siri and Apple are registered trademarks owned by Apple, Inc.
Google Assistant and Android are trademarks owned by Google LLC.
Other trademarks and trade names are those of their respective owners.

PREPARATION

Safety Notice
Video / movie playback will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video / movie functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most jurisdictions for the driver to view video while the vehicle is in motion.

Note : Only DVD Receiver

It is highly recommended that your JENSEN CDR462 is installed by a professional installer or an authorized dealer.
This product is only for use in vehicles with 12VDC negative ground only.
To prevent damage or injury:

• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the correct rating. Using a fuse with the wrong rating may cause the unit to malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• If you experience problems during installation, consult your nearest JENSEN dealer.
• If the unit malfunctions, reset the unit as described. If the problem still persists, consult your nearest JENSEN dealer or call tech assistance @ 1-888-921-4088.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after the unit is in use for a while.
• When extending the ignition, battery or ground wiring, make sure to use automotive-grade wir-ing with an a minimum AWG 16 or more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

INSTALLATION

Preparation

Please read and understand entire manual before installation. Consult a qualified technician for detailed instructions or installation assistance.

Before You Start

• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

• Unpack unit from its protective packaging.
• Connect vehicle wiring harness and antenna to this receiver’s harness. See wiring instructions. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation dash kit and/or wiring harness adapter (sold separately).
• Reconnect battery negative terminal.
• Test for correct operation and secure back into dashboard.
• Snap trim ring into place if needed.

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

Wiring Diagram – Inputs/Outputs

Note
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 10 amp ATC mini style fuse located on the power connector.

Wiring Notes
Rear camera input
A rear view camera (not included) can be used with the Camera input.

OPERATION

Control Locations

1. Microphone
2. microSD Card Slot
3. Eject
4. Reset
5. Voice Activation Button
6. Tune/Track Up
7. Power/Volume/Mute
8. Tune/Track Down
9. USB Port
10. Auxiliary Input

General Operation

Audio Settings

1. Volume
2. EQ Settings
3. EQ On/Off
4. Loudness On/Off
5. EQ Reset
6. Return to Source
7. EQ Presets / Custom
8. Balance / Fader

Balance/Fader Settings:

1. Volume
2. Fader Reset
3. Subwoofer On/Off
4. Return to Source
5. Return to EQ Controls

AM/FM Tuner Operation

AM/FM Tuner Operation

USB/microSD Card Operation

Media Compatibility – USB/microSD Card

MPEG

Format

| MPEG 1| 9
MPEG 2| 9
MPEG 2.5| 9

Sampling Frequency

| MPEG 1| 32/44.1/48kHz
MPEG 2| 12/16/22.05/24kHz
MPEG 2.5| 8/11.025/12kHz

Bitrate

| MPEG 1| 32 ~ 320kbps
MPEG 2| 8 ~ 160kbps
MPEG 2.5| 8 ~ 160kbps

Other Information

| Directory Depth| Unlimited
File Name Length| 32 bytes
Total File Number| 2000 files
Total Folder Number| 200 folders
File Number via Folder| 2000 files

MP3 ID3 TAG

| ver.1.x| 9
ver.2.x| 9
Title, Artist, Album| 9

Notes
Due to ongoing technological advancement, some USB flash drives and/or microSD cards may be incompatible with this unit.

Media Compatibility – CD/DVD

File System

| ISO9660| Level 1, Level 2| 9
Level 3| X
ISO9660

Extension

| JOLIET| Playback| 9
Filename| 32 bytes

Other Extensions

| ROMEO| Playback| X
Filename| X
Apple ISO| X
File

Extension

| .mp3/.MP3/.Mp3/.mP3| 9
.rmp/.m4a| X

MPEG

Format

| MPEG 1| 9
MPEG 2| 9
MPEG 2.5| 9

Sampling Frequency

| MPEG 1| 32/44.1/48kHz
MPEG 2| 12/16/22.05/24kHz
MPEG 2.5| 8/11.025/12kHz

Bitrate

| MPEG 1| 32 ~ 320kbps
MPEG 2| 8 ~ 160kbps
MPEG 2.5| 8 ~ 160kbps

Other Information

| Directory Depth| Unlimited
File Name Length| 32 bytes
Total File Number| 2000 files
Total Folder Number| 200 folders
File Number via Folder| 2000 files

MP3 ID3 TAG

| ver.1.x| 9
ver.2.x| 9
Title, Artist, Album| 9

Media Compatibility

Media Compatibility
The following types of files are not compatible:

• MP3 PRO format, MP3 playlists
• RMP format
• WAV format
• WMV format
• AAC, protected AAC, M4A format, M4V format.

Playback Order
MP3 playback sequence begins in the root folder of the USB flash drive or microSD card. Any empty folders or folders that do not include MP3/FLAC files are skipped.

Compatible Recording Formats
ISO9660 standards:

• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and “_” (underscore). Some characters may not be displayed correctly, depending on the character type.

Notes

• Some files may not play or be displayed correctly, depending on sampling rates and bit rates.
• For best results, use the following settings when ripping MP3 files: 128kbps or higher constant bit rate 44.1kHz or higher sampling frequency

DVD Operation

Bluetooth Operation

SWC Input Operation

The built-in SWC Interface is compatible with PAC steering wheel control modules. The PAC SWI-RC is recommended. A third-party adapter must be used in order for the XDVD600 to be compatible with any steering wheel controls. The following controls are available for most vehicles.

Note: Not all OE steering wheel functions may be supported by the XDVD600.

PAC SWI-RC Installation Hints

1. Set “Radio Select Switch”. Set the SWI-RC to position 7 – “Pioneer/Other/Sony”.
2. To program, use the Pioneer/Sony/Other radio function mapping order for CDR171 units.
3. When programming the SWI-RC, if a function is not supported (or not desired), then the function MUST be skipped as per the PAC SWI-RC instructions.

Func- tion Order| Function Mapping| SWI-RC (3.3VDC Reference)
---|---|---
Center Pin (Ring) Voltage

(Function Select)

| Tip Pin Voltage
1| Volume +| H 5.0v| 2.07
2| Volume –| H 5.0v| 2.32
3| Mute| H 5.0v| 1.01
4| Preset +| L 0.0V| 1.54
5| Preset –| L 0.0V| 1.81
6| Source| H 5.0v| 0.60
7| Seek + / Track +| H 5.0v| 1.54
8| Seek – / Track –| H 5.0v| 1.81
9| Band| H 5.0v| 2.73
10| BT Talk| L 0.0V| 0.60

Voice Assistant
Your receiver is designed with an easy access voice activation button to use Siri® or the Google Assistant™ via your car’s Bluetooth. Interact with your smartphone assis-tant while you drive with only the push of a button!
Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.

Rear Camera Operation – (Optional)

Connect an optional rear camera to the Camera Input (Black RCA connector). Refer to the wiring diagram for details.
Manual selection – Touch CAMERA icon from the Main Menu or from any operational mode (when enabled) to select camera mode. Touch the top left area on the screen to exit camera mode.

Note: The manual mode is for dedicated cameras that are ALWAYS on while driving, it is not meant for cameras that are connected to the vehicle’s reverse light.
The unit will automatically select camera mode when connected to the reverse lamp circuitry.

Front 3.5mm Aux Input
Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary input from the Main Menu to listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the device).

Limited One Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Namsung America Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
Namsung America Inc agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.

Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized JENSEN dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com.

Warranty Coverage
Limited 1-year warranty when purchased from an authorized Jensen dealer.

What to do?

1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
   • Call us toll-free at 888-921-4088
   • E-mail us at cs@jensenmobile.com

Exclusion of Certain Damages : This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether
or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.

Specifications

• Disc
  • Frequency response: 20Hz-20kHz
  • Channel separation @ 1kHz: >80dB
  • D/A converter: 24 Bit
• FM Tuner
  • Tuning range: 87.5MHz-107.9MHz
  • Usable sensitivity: 10dBf
  • 50dB quieting sensitivity: 20dBf
  • Stereo separation @ 1kHz: 38dB
  • Frequency response: 30Hz-13kHz
• AM Tuner
  • Tuning range: 530kHz-1710kHz
  • Usable sensitivity: 24uV
  • Frequency response: 30Hz-2.3kHz
• Front USB
  • Compatibility: High Speed USB 2.0
  • USB Class: Mass storage class
• microSD
  • Compatibility: microSD memory card & microSDHC memory card
• Monitor
  • Panel size: 6.2” diagonal measurement
  • View angle (up/down/left/right): 50/70/70/70
  • Resolution: 800 (H) x 480 (V)
  • Brightness (cd/m2): 250
  • Contrast ratio: 500:1
  • Pixels: 1,152,000
• General
  • Speaker output impedance: 4 ohms
  • Line output voltage: 2 volt RMS
  • Line output impedance: 200 ohms
  • Chassis dimensions: 6.2” x 6.2” x 4” (W x D x H)
  • Design and specifications subject to change without notice.

CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output : 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N
Signal to Noise Ratio : 80dBA (reference: 1 watt into 4 ohms)

Troubleshooting

General

Problem| Cause| Action
**Unit will not turn on (no power)| Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage| ** Check connections for proper voltage (11~16VDC)
Black wire not connected| Check connection to ground
Fuse blown| Replace fuse(s)
Unit has power (but no sound)| Speaker wires not connected| Check connections at speakers
One or more speaker wires touching each other or touching chassis ground| Insulate all bare speaker wires from each other and chassis ground

Unit blows fuse(s)

| Yellow or red wire touching chassis ground| Check for pinched wire
Speaker wires touching chassis ground| Check for pinched wire
Incorrect fuse rating| Use fuses with correct rating

Customer Support
1-888-921-4088
(Monday-Friday, 9AM-5PM EST) Visit https://www.jensenmobile.com

For Your Records
Please keep your original sales receipt and be prepared to provide this receipt in the event you require service, as your original receipt is considered the best proof of purchase and indicates the date you purchased your JENSEN product.

• Dealer Name
• Dealer Phone
• Purchase Date

Customer Support
1-888-921-4088
(Monday-Friday, 9AM-5PM EST) Visit https://www.jensenmobile.com

Designed and Engineered in USA

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of NAMSUNG AMERICA INC.

Namsung America Inc.
©2021 Namsung America Inc. All rights reserved.

References

• Car Stereo - Jensen Mobile
• Car Stereo - Jensen Mobile

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>