JENSEN BUCAM100J Backup Camera LED High Definition User Guide
- June 3, 2024
- Jensen
Table of Contents
JENSEN BUCAM100J Backup Camera LED High Definition
WHAT’S INSIDE THE BOX
- Product Sheet
- BUCAM200 Camera w/ Adjustable Mount
- Power Cable w/ Fuse, Video Cable, 2 Mounting Screws and Foam Rubber Mounting Pad.
DIMENSIONS
MEASUREMENTS ARE IN MILLIMETERS (MM)
Note: Video cable has a built-in power wire (2 red wires on either end) for ease of installation. Only 1 cable has to be routed during installation.
Camera Specifications
- IMAGE SENSOR CMOS, PC7070
- POWER 12VDC, Negative Ground
- POWER CONSUMPTION <1 Watt
- EFFECTIVE PIXELS 640×480
- VIDEO FORMAT NTSC
- LUX <0.5
- WHITE BALANCE Auto
- VIEWING ANGLE 170 Degrees
- IP RATING IP67
- OPERATING TEMPERATURE -15F ~ 160F
- CAMERA BODY : Zinc Alloy
LIMITED ONE-YEAR WARRANTY
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
Dual Electronics Corp. warrants this product to the original purchaser to be
free from defects in material and workmanship for a period of 1(one) year from
the date of the original purchase.
Dual Electronics Corp. agrees, at our option, during the warranty period, to
repair any defect in material or workmanship or to furnish an equal new,
renewed or comparable product (whichever is deemed necessary) in exchange
without charges, subject to verification of the defect or malfunction and
proof of the date of purchase. Subsequent replacement products are warranted
for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Jensen / Dual or Axxera dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.
What to do?
- Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
- If you require service during the warranty period, you must carefully pack the product
- (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
- Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
- For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
- Call us toll-free at 1-866-382-5476
- E-mail us at cs@.dualav.com
EXCLUSION OF CERTAIN DAMAGES
This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume, for the company, any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.
FAQs
Can I use this camera din unit?****
Absolutely, just plug it in.
Is an additional screen necessary, or can I connect this device straight to my factory-installed screen?****
You will need an integration harness if you want to upgrade that vehicle’s OEM screen to include a backup camera.
Can the backup camera remain on continuously?****
Yes! The way the 12V power cord is attached will determine everything. Any 12V source on the vehicle can be connected to 12V for continuous operation, including running lights, licence plate illumination lamps, run lines straight to the battery, the ignition switch, or any other 12V source.
What is a backup camera with a universal mount?****
You have the option of mounting this universal backup camera on the front or the back. Anywhere on your automobile, like the bumper or close to the licence plate, the camera is easy to put.
What distinguishes a rear view camera from a backup camera?****
A backup camera turns on when you put your car in reverse. By activating them, rear-view cameras allow you to see what is behind your car at any time.
Exist several kinds of backup cameras?****
setups with only cameras. You can add these to your automobile if it already has a stock screen in the dash. Systems that integrate. These have cameras and mountable displays that you can install in your car. screens and cameras for each person. both cameras and mirror displays.
Does a backup camera use battery power?****
yes! It will drain the battery even though it will do so gradually and at a low level.
Can a backup camera be submerged?****
Backup Camera is completely waterproof thanks to its IP69K grade. Due to the camera’s highest IP rating, it will operate well in all conditions.
Where should a backup camera be mounted?****
A reverse camera works best near the centre of the vehicle. Whether it is mounted higher up facing down or lower down, it will have a better field of view. For instance, the rear bumper is ideal, but the area above the rear doors can also be used on other vehicles.
What position does a backup camera need to be in?****
The ideal temperature range is from 140 to 150 degrees. With all of these tools, the instructions are very helpful for locating objects in the backup camera and determining whether they are obstructing the view.
How much power is consumed by a backup camera?****
1-2 amps are required by a camera. A monitor uses 4-5 amps of power.
Are backup cameras powered?****
Both a wired source of power and a grounded power supply that is grounded to your chassis are required for your camera. Additionally, it must understand when to turn on and off.
How trustworthy are backup cameras?****
Despite the high image quality and size of the screens in the car, back-up cameras still provide a limited view of what is going on behind and around the vehicle. Actually, most cameras only provide an 80-degree field of view when positioned behind the automobile.
Do backup cameras guard against mishaps?****
Backup cameras can reduce collisions by 16%, according to the Insurance Information Institute’s examination of crash data from 22 states.
How is a backup camera wired to remain on?****
continuous power supply When linked to Ignition, the camera can be permanently powered on by a continuous power source. An other choice is to connect the camera or camera system to the car’s ignition. Intelligent Switching