JENSEN CAR723W Receiver with Wireless Android Auto & Apple Carplay User Guide
- May 15, 2024
- Jensen
Table of Contents
JENSEN CAR723W Receiver with Wireless Android Auto & Apple Carplay User Guide
Wiring Diagram – Inputs/Outputs
Note,
When replacing a fuse. make sure to use the correct type and amperage. Using
an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style
fuse located on the power connector.
Installation
Before You Start
- Disconnect negative battery terminal. Consult a qualified technician for instructions.
- Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Control Locations
Main Menu
In main menu, press the desired icon to enter the corresponding mode: AM/FM/Bluetooth Phone/ Bluetooth Audio/Apple CarPlay/Android Auto/USB/ Camera/EQ /AV In/Settings
Tuner Operation
USB Operation
From the main menu, touch the USB icon on the main screen.
Audio Operation
Select from the below 3 icons in the Settings menu to select between Balance, Fader and Time Alignment Settings, EQ Presets and 10-Band EQ Settings or Surround Settings.
Screen Operation
Press the Monitor icon in the Settings menu to access the Brightness, Contrast, Button Illumination Colors and Wallpaper Settings.
General Operation
Press the Function icon in the Settings menu to access the Time Zone, Date and Time and other radio Settings.
Wired & Wireless CarPlay Operation
Wired connection
- Connect an Apple CarPlay compatible device to this unit via USB.
- Press the Apple CarPlay icon.
The Apple CarPlay home screen appears.
Wireless connection
Before using Apple CarPlay wirelessly. tum on the Bluetooth/Wifi function on the Phone.
- Press icon on the main menu,
- Press ” ✓ “to confirm to use wireless CarPlay,
- Press “ “icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”:
- A pass key will be displayed on the screen,
- The same key appears on the iPhone. press “Pair” and then press “Allow· for the popups,
- Press “✓” on the screen to confirm to connect,
- Press “Use CarPlay” on the iPhone. The unit configures the connection then starts the application.
Wired & Wireless Android Auto™ Operation
Wired connection
- Connect an Android Auto™ compatible device to this unit via USB.
- Press the Android Auto icon.
The Android Auto home screen appears.
Wireless connection
Before using Android Auto wirelessly, turn on the Bluetooth/Wifi function on the Android device.
- Press icon on the main menu,
- Press “✓” to confirm to use wireless Android Auto:
- Press “ “icon to search phone device. The available devices appear on the list:
- Find the desired device on the screen and press “Pair “,
- A pass key will be displayed on the screen:
- The same key appears on the Android device. press “Pair” and then press “Allow” for the popups:
- Press “✓” on the screen to confirm to connect,
The unit configures the connection then starts the application.
Bluetooth Operation
Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream
audio. it must be authenticated.
This is also referred to as “pairing” a device.
Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are
currently connected. Complete the pairing sequence from your Bluetooth device.
Refer to the owner’s manual for your device for more details. The device name
is” CAR723W”. The unit can be in any mode of operation when pairing is
performed. On certain phones. pairing may need to be done more than once.
Connect
The head unit will automatically connect to the last connected device when the
connect feature is set to Auto connect On.
If the connect feature is set to Auto Connect Off. the head unit will not
automatically connect to any device.
Bluetooth Phone
From the main menu. touch the Bluetooth on the screen.
Bluetooth icon will appear anytime a Bluetooth device is connected.
Dialing a Number
Press to display keypad and dial a number.
Making and Ending a Call
Press to connect a call. and press to end a call.
Transferring Audio
Press D to transfer audio between the head unit and mobile phone.
Streaming Audio
Press ► to play or pause the music.
Press |◄ to skip to the previous track.
Press ►| to advance to the next track.
Rear Camera
*Limited Three Year Warranty**
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state. Jensen warrants this product to the original
purchaser to be free from defects in material and workmanship for a period of
three years from the date of the original purchase. Jensen agrees, at our
option, during the warranty period, to repair any defect in material or
workmanship or to furnish an equal new, renewed, or comparable product
(whichever is deemed necessary) in exchange without charges, subject to
verification of the defect or malfunction and proof of the date of purchase.
Subsequent replacement products are warranted for the balance of the original
war rant period.
What is covered? This warranty covers all defects in the material and
workmanship in this product.
The following are not covered: software, installation/removal costs, damage
resulting from accident, misuse, abuse, neglect, product modification,
improper installation, incorrect line voltage, unauthorized repair, or failure
to follow instructions supplied with the product, or damage occurring during
return shipment of the product. Specific license conditions and copyright
notices for the software can be found via
www.jensenmobile.com.
Warranty Coverage
- Limited 3-year warranty. (Proof of purchase requi red)
Jensen recommends professional installation of any electronics in your vehicle to ensure the best
performance.
What to do?
- Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
- If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
- Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
- For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
• Cal l us toll-free at (BBB) 921 ,4088
(Monday-Friday, 9:00 am, to 5:00 pm, EST)
• Email us at [email protected]
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received. including interference that may cause undesired operation.
Warning , Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note , This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However. there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
www.jensenmobile.com
© 2023 Namsung America Inc. All rights reserved.
NSC0723,V01