DEFINITIVE TECHNOLOGY Studio 3D Mini 4.1 Home Theater Sound Bar User Guide

Studio 3D Mini
4.1 Home Theater Sound Bar and Wireless Subwoofer System
Setup Guide

What’s in the Box

Setup

1. Place the soundbar
   For the best listening experience, position the soundbar centered under your TV. You may choose to place it either on your furniture, or wall-mount the soundbar below the TV. OPTIONAL: The Studio 3D Mini can be wall-mounted. Please refer to the wall mount template in the product carton.

2. Connect the soundbar to an AC outlet
   During startup, you will see a single LED on your soundbar blinking slowly. When the light appears as a solid amber, you can move
   on to the next step.

3. Place the subwoofer
   For the best performance, place on the same wall as the TV, no more than 30 ft (10 m) from the soundbar.
   Performance Tip: placing the subwoofer in a corner can make the bass seem even more pronounced.

4. Connect the subwoofer to an AC outlet and switch power to ON
   On the back of the subwoofer, the SYNC LED will be solid green to indicate that it is paired with the sound bar.

5. Download the HEOS App
   Download the HEOS App on your iOS or Android Device.

6. Open the HEOS App
   Once the download is complete, open the HEOS App on your iOS or Android Device.

7. Tap Settings Icon

8. Tap “Add Device” in the Settings Screen
   Follow instructions in App to complete the setup and configuration of Studio 3D Mini.

Owner’s Manual
For more information, visit https://www.definitivetechnology.com/.
Refer to the Online Manual for other functions information and operation procedure details.
manuals.definitivetechnology.com/Studio3Dmini/NA/EN/

https://qrs.ly/uzbuem2

Remote Control

Sound Bar Controls

Front of Studio 3D Mini

Power – Turns the Studio 3D Mini on/off
Source – Switches soundbar inputs
Bluetooth – Initiates Bluetooth pairing
– Master Volume Down – Decreases the master volume
+ Master Volume Up – Increases the master volume

Back of Studio 3D Mini

Sound Bar Indicators and Status Lights

Source Indication
Below is a table showing the source indicators.

TV|
---|---
HDMI|
OPTICAL|
AUX|
BLUETOOTH|
HEOS|

Several source colors indicate the audio bitstream for non-streaming inputs.
PCM CONTENT
DOLBY SIGNAL
DTS SIGNAL
NOTE: “TV” Input is set as HDMI OUT (eARC / ARC) by default, but the input source is configurable by going to the “TV Input” setting in the “My Devices” menu within the HEOS App.

Volume Indication
Master Volume will be communicated with the five LEDs in the row of Visual Indicators LEDs.
The volume of 1% will be indicated by the leftmost LED as dimly lit, and 100% will be indicated with all 5 Visual Indicator LEDs fully illuminated.

Visual indicator LEDs will illuminate purple when the NIGHT MODE is active.

Mute will be indicated by the Status light.
Volume mute when Status LED is Blue and slowly blinking.

Subwoofer Back Panel & Visual LED Indicators

Back Panel of Subwoofer

Streaming Music from Your Device

STREAMING MUSIC FROM YOUR MOBILE DEVICE USING BLUETOOTH

1.  Activate the Bluetooth setting on your mobile device.
2.  Press and hold the Bluetooth Button ( ) located on the remote control or on the top panel of the soundbar until the status light on the front flashes green.
3.  Select “Studio 3D Mini” from the list of available Bluetooth speakers from your mobile device.
4.  Play music using any app on your device and the sound will now play from the speaker.

STREAMING MUSIC FROM YOUR DEVICE USING APPLE AIRPLAY

1.  Play music from your favorite app.
2.  “Swipe up” to open the iOS Control Center.
3.  Tap the AirPlay icon from the “Now Playing” panel.
4.  Choose “Studio 3D Mini” from the device list in AirPlay.
5.  Enjoy your music.

NOTE: Using Apple AirPlay requires your soundbar to be connected to Wi- Fi. To connect your soundbar to your local network, follow instructions in the HEOS App to complete the setup and configuration of Studio 3D Mini. (See on page 3.)

Basic Troubleshooting

MY SOUNDBAR WON’T CONNECT TO MY NETWORK
– Make sure your mobile device is connected to your wireless network before setting up your soundbar.
– Alternatively, you can connect your soundbar to your network router using an Ethernet cable sold separately. Once connected via Ethernet, the HEOS App should recognize the soundbar and you can manually move it to your wireless network using “Settings” – “My Devices” – “(Device Name)” – “Advanced” – “NETWORK SETTINGS”.

I DON’T HEAR THE TV SOUND COMING FROM THE SOUNDBAR
– Check the cable connection between the soundbar and your TV and other devices. Ensure cables are fully connected and connected to the right ports.
– Ensure that TV Speakers are “Off” in your TV settings menu
– If you are using HDMI eARC/ARC as your connection between your soundbar and your TV, ensure that the “ARC” setting is “On” in your TV settings
NOTE: “TV Speakers” settings may be labeled as Receiver, or External speakers depending on your make of TV.
NOTE: Not all TVs have these settings.
– Verify that CEC functions are enabled in your TV settings.
– Check that the connections between your soundbar and your TV are synced with the settings in the
HEOS app. To find out the TV input settings, open the HEOS App and navigate to Music View > Settings > My Devices > TV Input
– To update the connection go to Music View > Settings > My Devices > TV Input

Select the Input type that currently connects your soundbar and your TV.

NO SOUND COMING OUT FROM THE SUBWOOFER

– Ensure that your subwoofer is connected to power and switched ON.
– Check the SYNC LED at the back of the subwoofer. Make sure that it is solid green. If it is not green, refer to the online manual for detailed instructions on how to manually reset the connection between the soundbar and subwoofer.

RESETTING YOUR SOUNDBAR

– Resetting your soundbar will clear out the wireless network settings, EQ, and name, but retain its current software.
– You will have to use “Settings” – “Add Device” to reconnect the soundbar to your home network before it can be used.
– To reset your soundbar, press and hold both the CONNECT button (located on the back panel of the soundbar) and Bluetooth ( ) button (located on the top panel of the soundbar) for 5 seconds until the status LED on the front of the soundbar begins to flash amber.

Owner’s Manual
For more information, visit https://www.definitivetechnology.com/.
Refer to the Online Manual for other functions information and operation procedure details.
manuals.definitivetechnology.com/Studio3Dmini/NA/EN/

https://qrs.ly/uzbuem2

For Further Assistance:

Phone Number
800-228-7148 (North America)
+1 410-363-7148
Email
definitive@custhelp.com
Mail
Definitive Technology
15541 Fermi Court Carlsbad,
CA 92008 U.S.A

Warranty
This soundbar is covered by a limited warranty.
Details can be found on the Definitive Technology website:
https://www.definitivetechnology.com/warranty-information
Follow us on

Twitter
Instagram

Facebook

www.definitivetechnology.com
Printed in Vietnam 5411 11892 00AT
© 2020 Sound United. All Rights Reserved.

References

• Studio 3D Mini
• Definitive Technology™ - High Tech Speakers & Audio Systems
• Definitive Technology™ - High Tech Speakers & Audio Systems
• Audio Support | Warranty Information | Definitive Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>