GINGKO G004ME Tumbler Selfie TWS Bluetooth Speaker User Manual
- June 7, 2024
- Gingko
Table of Contents
GINGKO G004ME Tumbler Selfie TWS Bluetooth Speaker
Thank you for your purchase of the Gingko Tumbler Selfie TWS/Bluetooth Speaker. Please follow this manual to achieve your best experience of this beautifully designed object for you. Please keep this user manual for future reference.
Accessories
Lanyard Strap & Charging Instruction
Product Charging Instruction
Open the charging slot cover by turning it clock wisely as below illustration
image. Then connect the USB charging cable to any USB plug adapter with an
output of 5V-1A to charge the product ( Type C cable included, USB plug
adapter not included;
Please Note: The product will make two constant beep sound every 5-10
seconds when the battery is low.
Lanyard Strap Installation (Optional)
The lanyard strap is included in the USB cable box. You can install it on the product by following the below illustration as an optional choice for an even more portable use.
Power On/ Off
Bluetooth Connection
When the speaker is turned on, you can find ” Tumbler Selfie Speaker ” in the Bluetooth searching list on your Bluetooth device and touch to connect it. When it’s paired, the white indication light will stay on instead of flashing.
If ‘Tumbler Selfie Speaker’ is not found on your device, turn off the power of
the speaker to reset Bluetooth, or turn off and turn back on the Bluetooth
function on your device, then research on your device again and find “Tumbler
Selfie Speaker” to pair it.
Selfie Mode & Music/Selfie Mode
Selfie Mode
When the speaker on the Selfie Mode (no music playing on your smartphone
throughout spotify, for example), a single quick touch will take the selfie
photo when the camera function on your device is turned on.
Music/Selfie Mode
When the speaker on the Music Mode, a single quick touch will pause or restart
the music playing. You can still take a selfie photo in the Music Mode, but
the operation varies depending on your smartphone system. For Android System:
in Music Mode, a single quick touch will take the selfie photo only when you
switched on your camera and will not pause or restart the music playing.
For IOS system: in Music Mode, quickly touching the touch control centre twice
will enter the Selfie Mode while your camera is turned on. After entering the
Selfie Mode, a single quick touch will take the selfie photo only and will not
pause or restart the music playing, same as the Android System. To exit the
Selfie Mode, quickly touch the touch control centre twice again.
( Please Note: a single touch will increase the music volume if the camera
function is not switched off and the Selfie Mode is not quit)
TWS pairing Mode
This product has TWS (true wireless stereo) technology built in so it allows you to enjoy the stereo quality sound when you have two Tumbler Selfie Speakers. Please follow the below instructions to get them paired.
- Turn on both speakers by touching the fabric top on the speakers for 3 seconds and make sure none of the speakers haven’t been paired with any Bluetooth device first.
- Quickly tap the touching control area twice on one or both speakers and they should get paired in 5-10 seconds with a beep sound.
- If the pairing is not successfully, turn off the both devices and try it again by following the above instructions. When paired, the main speaker indication light will flash and the other device light will stay on.
- The two devices will be automatically paired once they have been turned on If they have been paired before.
- A quick touch on the touch control area on either speaker will pause/restart the playing or take a selfie photo.
Warranty & Product Care
Warranty
This product is covered under one year manufacturer warranty starting from the date of purchase. Within the warranty period, any repair service or components replacement will be provided for free.
Warranty does not apply to the following circumstances:
- Product failure due to improper use, misuse, drops, abuse, alteration, faulty installation, power line surge or modification.
- Product failure due to acts of nature such as natural disaster, fire, or flood etc.
Product Care
- The product is made of natural wood, any natural wood grains is not a Product fault.
- Any drop of this product could cause damage to the device.
- This product is not water proof, so please do not use it under the water.
- Please note that the product will make a beep indication sound to indicate when the battery is low. Please charge it as soon as you could.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>