Forum Lighting ZN-37938-WHT Fixed PIR Wall Light Instruction Manual
- June 7, 2024
- Forum Lighting
Table of Contents
Forum Lighting ZN-37938-WHT Fixed PIR Wall Light
Please take time to read this leaflet carefully and retain it for future reference.
Specifications
| Requirement | 7W Max. GU10 LED Reflector Bulb |
|---|---|
| Note | Bulb Not Included |
Installation Steps
- Power Off : Ensure the power supply is switched off at the mains circuit.
- Mounting : Attach the mounting bracket to the wall surface with supplied screws and wall plugs.
- Wiring : Connect the live (L), neutral (N), and earth wires to the corresponding terminals on the mounting bracket.
- Bulb Installation : Fit the GU10 LED Reflector Bulb into the fixture.
- Fixture Attachment : Secure the light fixture to the mounting bracket.
- Adjustment : Adjust the direction of the light fixture as desired.
Settings Adjustment
- Time Setting : Adjust the time dial to set the duration the light will stay on after detecting motion.
- Lux Setting : Adjust the lux dial to set the ambient light level at which the light will activate.
- Sensing Range : The motion sensor has a maximum range of 1.2 to 3 meters in height and a detection radius of 0 to 8 meters.
Operation
- Power On : Turn the power supply back on at the mains circuit to begin operation.
- Motion Detection : The light will turn on when motion is detected within the sensing range if the ambient light is below the set lux level.
FAQ
What type of bulb do I need for this fixture?
A 7W Max. GU10 LED Reflector Bulb is required, which is not included with the fixture.
How do I adjust the time the light stays on after motion is detected?
Use the time dial on the fixture to adjust the duration.
How can I set the light to only activate in low-light conditions?
Adjust the lux dial to match the desired ambient light level threshold.
What is the motion sensor's range?
The motion sensor can detect movement up to 8 meters away and between 1.2 to 3 meters in height.
REQUIRES 7W MAX. GU10 LED REFLECTOR BULB BULB NOT INCLUDED
POWER
ON/OFF
Installation Instructions
Please take time to read this leaflet carefully and retain it for future reference.