ANKER PowerCore Metro Essential 20000 PD Power Bank User Manual
- June 6, 2024
- Anker
Table of Contents
USER MANUAL
PowerCore Metro Essential 20000 PD
Power Bank
For FAQs and more information, please visit:
anker.com/support
Product Number:
A1287
External Battery / Portable Charger
51005002462 V01
| @Anker
@Anker Japan
@Anker Deutschland
---|---
| @AnkerOfficialnker
@Anker_JP
| @anker_official
@anker_ip
Charging Your Phone or Tablet
Charging Your Bluetooth Earphones or Smart Watches
- Enter “trickle-charging” mode: Press the power button twice or press and hold for 2 seconds. The LED indicator will turn green.
- Charge your devices recommended for smartwatches or Bluetooth earphones.
- Exit “trickle-charging” mode: Press the power button once again.
Recharging Your PowerCore
Recharge your PowerCore via a PD charger ( not included).
Specifications
| Capacity | 20,000 mAh /72 Wh |
|---|---|
| USB-C Input | 5V= 3A, 9V = 2A, 15V = 1.2A |
| USB-C Output | 5V = 3A, 9V = 2.22A |
| USB-A Output | 5-6V= 3A/ 6-9V= 2A / 9-12V =1.5A |
| Total Output | |
| Size | 158 x 74.2 x 19.25 mm / 6.2 x 2.9 x 0.8 in |
| Weight | 345.5 g /12.2 oz |
Important Safety Instructions
When using this product, basic precautions should always be
followed, including the following:
- Store product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 32°F to 95°F / 0℃ to 35℃.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should change and discharge once every three months.
- When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents
- Misuse, dropping or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware discharged batteries may cause fire or smoke, tape the terminals to insulate them.
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment.
CAUTION: Risk of explosion if the battery is replaced by an incorrect
type.
WARNING: The batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire, or the like. The extremely
low air pressure may result in an explosion or the leakage of flammable liquid
or gas.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the
product type A1287 is in compliance with Directive2014/30/EU & 2001/95/EC &
2011/65/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
https://www.anker.com
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help. The
following importer is the responsible party. Company Name: Fantasia Trading
LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973
This device complies with the Industry Canada license ‐ ICES003. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Customer Service
18-Month Limited Warranty
Lifetime Technical Support
support@anker.com
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)
+971 42463266 ( Middle East & Africa) Sun-Thu 9:00 – 17:30 (GMT+4)
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>