ANKER A1654 MagGo Power Bank User Guide
- May 15, 2024
- Anker
Table of Contents
ANKER A1654 MagGo Power Bank
Specifications
- Product Number: A1654 51005004234 V01
- Capacity: 10,000mAh
- Manufacturer: Anker Innovations Limited
Important Safety Instructions
- Use only the recommended power supply to avoid fire or personal injury risks.
- Do not disassemble the product; seek professional service for repairs.
- Avoid exposing the power bank to rain or snow.
- Switch off the power bank when not in use to prevent any accidents.
- Do not use damaged or modified power banks to avoid unpredictable behavior and potential risks.
- Avoid opening, crushing, or incinerating the power bank.
FCC Statement
This device complies with Part 15 of the FCC Rules and should not cause
harmful interference.
European Community Compliance:
This product meets the radio interference requirements of the European
Community.
Disposal Instructions
Do not treat this product as household waste; dispose of it at designated
electrical and electronic equipment recycling points.
Contact Information for Responsible Parties:
- Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3, 80807 Munich, Germany
- Anker Technology (UK) Ltd, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
User Guide and Support
- For tutorial videos, FAQs, manuals, and more information, visit Anker Support Website.
- You can also scan the QR code provided in the manual for quick access to resources.
Social Media
Stay connected with Anker on social media: @anker_official, @anker_jp,
@AnkerDeutschland, @AnkerJapan, @AnkerOfficial, @Anker_JP
Quick Start Guide:
Refer to the user manual for detailed instructions on using the Anker MagGo
Power Bank (10K).
FAQ
-
Q: How long does it take to fully charge the power bank?
A: The charging time varies depending on the power source used. It usually takes around X hours to fully charge the power bank. -
Q: Can I charge multiple devices simultaneously with this power bank?
A: Yes, you can charge multiple devices simultaneously as long as the total output does not exceed the power bank’s capacity.
For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com
Or scan the QR code below:
Anker MagGo Power Bank (10K)
QUICK START GUIDE
- This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases.
- Do not use an adapter with an output of 5V/1A (5W) or less.
- High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
Important Safety Instructions
When using this product, basic precautions should always be followed:
-
Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
-
Operating temperature should be between 0°C to 35°C / 32°F to 95°F.
-
Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
-
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
-
To reduce the risk of injury, close supervision is necessary when the product is used near children.
-
Do not expose power bank to rain or snow.
-
Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
-
Do not expose a power pack to fire or excessive temperature.
Exposure to fire or temperature above 100°C may cause explosion. -
Switch off the power bank when not in use.
-
CAUTION: Risk of Fire and Burns. Do Not Open, Crush or Incinerate. Follow Manufacturer’s Instructions.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment on and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an
uncontrolled environment. This equipment can be used in portable exposure
condition.
The following importer is the responsible party (for FCC matters only).
- Company Name : Fantasia Trading LLC
- Address : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone : +1 800 988 7973
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Statement
IC RF exposure statement:
This equipment complies with IC Radiation exposure limits set forth for an
uncontrolled environment. This equipment can be used in portable exposure
condition.
Manufacturer: Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,Kowloon, Hong Kong
Declaration of Conformity
This product complies with the radio interference requirements of the European
Community.
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://www.anker.com.
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
The following importers are the responsible parties (contract for EU and UK matters) Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
- frequency band(s) in which the radio equipment operates;
- maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates.
Radiated H-Field | -12.92 dBuA/m@10m |
---|---|
TX/RX frequency range | 111-360KHz |
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>