ANKER Charging Dock for Quest 2 User Manual
- October 30, 2023
- Anker
Table of Contents
ANKER Charging Dock for Quest 2
Product Information
The Charging Dock for Quest 2 is a device designed for charging the Quest 2 headset and controllers. The dock comes with a headset display stand, a head strap support stand, a Type-C cable, and AA rechargeable batteries. The charging dock has a digital display that shows the charging status of the controllers and a LED ambient light in the headset display holder that turns off after 2 seconds to save energy and increase the life of the dock.
Installation Steps
- Connect the charging dock to the headset display stand with the Type-C cable.
- Insert the headset display stand into the fixing rod of the charging dock.
- Insert the headset head strap support stand into the fixing rod of the charging dock.
- Remove the original battery cover of the controller and replace it with Ni-MH AA Rechargeable Batteries. Ensure that the metal contacts on the battery (in gray) face upwards for charging.
- Install the included battery cover of the controller with magnetic induction. There is an R or an L on the back of the battery cover.
- Adjust the controller leather knuckle straps to fit your hand size.
- Fix the battery cover with the fixed clasp to charge stably and prevent the batteries from falling off.
- Put the headset and controllers on the corresponding charging dock positions, then turn on the power.
Product Usage
Once you have completed the installation steps, you can use the Charging Dock for Quest 2 to charge your headset and controllers.To charge, put the headset and controllers on the corresponding charging dock positions and turn on the power. The digital display will show the charging status of the handle (red means charging, green means charging is complete), and the LED indicator ambient light in the headset display holder stylish will have a 2-second dream color lighting when the headset is just being charged.
Some Notes About Charging:
- About Controllers Charging: The Quest may display the controller batteries at % or lower even when they are fully charged. This is normal as the charging dock keeps the controllers slightly below % to prevent overcharge and increase battery life and charging stability.
- About Headset Charging: When the headset charging indicator shows a steady green light but the headset display shows about % of the power, and the headset’s own indicator shows that it is still charging, this is normal. The charging dock will continue to charge the Quest headset with a very small charging current (steady green light) to maximize battery life and health.
- A bout LED Ambient Light: The LED indicator ambient light in the headset display holder stylish will turn off after 2 seconds to save energy and increase the life of the dock.
PRODUCTS INCLUDED
SOME NOTES ABOUT CHARGING
-
About Controllers Charging
Usually, the batteries are fully charged, but the Quest may still display it at % or lower. Don’t worry, this is completely normal. To prevent overcharge and increase both battery life and charging stability, your charging dock will keep the Quest controllers slightly below %, so the battery display may show that the batteries are not fully charged. -
About Headset Charging
When the headset charging indicator shows a steady green light, but the headset display shows about % of the power, and the headset’s own indicator shows that it is still charging. This is normal and nothing to worry about. When the headset is charged at about %, your charging dock will continue to charge the Quest headset with a very small charging current (steady green light), and the headset can be charged to % in about . hours, to maximize battery life and health. -
About Led Ambient Light
The led indicator ambient light in the headset display holder stylish will have a -second dream color lighting when the headset is just being charged. In order not to disturb sleep, save energy and increase the charging dock life, the led indicator ambient light will be turned off after seconds, and the charging dock will continue to work normally.
INSTALLATION STEPS
-
Connect the charging dock to the headset display stand with Type-C cable.
-
Insert the headset display stand into the fixing rod of the charging dock.
-
Insert the headset head strap support stand into the fixing rod of the charging dock.
-
Remove the original battery cover of the controller, and replace it with Ni-MH AA Rechargeable Batteries.
(Note: There are metal contacts on the battery (in gray) that have to face upwards for charging. If it still can’t be charged, please tell us and we will make sure to give you a satisfactory solution in time.)
-
Have ensured the metal contacts on the battery (in gray) face upwards, and install the included battery cover of the controller (There is an “R” or an “L” on the back of the battery cover) with magnetic induction.
-
Fix the battery cover with the fixed clasp to charge stably and prevent the batteries from falling off.
-
Adjust the controller leather knuckle straps to fit your hand size.
-
Put the headset and controllers on the corresponding charging dock positions, then turn on the power. The digital display will show the charging status of the handle (red means charging, green means charging is complete), and the led indicator ambient light in the headset display holder stylish will have a -second dream color lighting when the headset is just being charged.
QUESTIONS & ANSWERS
- Why are my controller batteries not charging? Please make sure the batteries are positioned correctly in the controllers. There are metal contacts on the battery (in gray) that have to face upwards for charging.
- How many times can I charge the batteries? The battery can be recharged COMPLETE charge/discharge cycles ( % – %, % – % ).
- Why do the controllers feel warm when charging? Unlike Li-ion batteries, it is normal for NiMH rechargeable batteries to heat up while charging. There is no need to worry about this temperature increase, as the built-in temperature protection prevents overheating.
- What should I do if temperature protection is triggered? Built-in temperature protection automatically stops charging when the battery temperature rises above the trigger point. When charging stops, remove the controllers from the charging cradle and let them cool for – minutes.
- Does it charge for the elite strap with battery? Yes, It is compatible with the elite strap with battery.
Continuously providing high-quality product is always our mission.
If you have any issues about the Quest Charging Dock, you can contact with us
through amazon messages directly, and we will provide satisfactory service for
you.