ANKER A2034 Power 3-Port 65W Elite Wall Charger User Manual

USER MANUAL
Power !!! 3-Port 65W Elite Wall Charger

Attention

Read all the instructions before using the product.

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during the use of the appliance must not exceed 25°C.
• Naked flame sources, such as candles, must not be placed on the product.
• The disconnection from line voltage is made by an AC plug.
• In case of broken plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

Using Your Product

For the fastest and safest charge, use an Anker® cable, your device’s original cable, or another certified cable (such as  MFi).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/ TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

This device complies with Industry Canada license­ICES-003. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Statement
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2034 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/ EC. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche- Strasse 3-5, 80807 Munich, Germany

Indoor use only

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Specifications

Average active
efficiency| 85.67%
Efficiency at low
load (10%)| 82.07%
No-load power
consumption| 0.12W

Using One Port:

45W USB-C Output:
5.0V 3.0A 15.0W /
9.0V 3.0A 27.0W /
15.0V 3.0A 45.0W /
20.0V 2.25A 45.0W Max
PPS: 3.3V – 21.0V 2.15A
Max (45.0W Max)
20W USB-C Output:
5.0V 3.0A 15.0W /
9.0V 2.22A 20.0W Max
USB-A Output:
5.0V 2.4A 12.0W Max

Using Two Ports:

45W USB C Port + 20W USB-C Port:
45W USB-C Output:
5.0V 3.0A 15.0W /
9.0V 3.0A 27.0W /
15.0V 3.0A 45.0W /
20.0V 2.25A 45.0W Max
PPS: 3.3V – 21.0V 2.15A Max (45.0W Max)

20W USB-C Output:
5.0V 3.0A 15.0W /
9.0V 2.22A 20.0W Max

45W USB-C Port + USB-A Port:
45W USB-C Output:
5.0V 3.0A 15.0W /
9.0V 3.0A 27.0W /
15.0V 3.0A 45.0W /
20.0V 2.25A 45.0W Max
PPS: 3.3V – 21.0V 2.15A Max
(45.0W Max)

USB-A Output:
5.0V 2.4A 12.0W Max
20W USB-C Port + USB-A Port:
20W USB-C Output:
5.0V 3.0A 15.0W
USB-A Output: 5.0V 2.4A 12.0W Max

Using Three Ports:

45W USB-C Output:
5.0V 3.0A 15.0W /
9.0V 3.0A 27.0W /
15.0V 2.0A 30.0W
PPS: 3.3-21.0V 1.4A 30.0W Max
20W USB-C Output: 5.0V 3.0A 15.0W
USB-A Output: 5.0V 2.4A 12.0W Max

Lifetime technical support

**18-month limited warranty ***

support@anker.com
support.mea@anker.com
(For the Middle East and Africa Only)

(US) +1 (800) 988 7973 Mon – Fri 9:00am – 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon – Fri 6:00 – 11:00 (GMT)

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties  given in this Limited Warranty.

For FAQs and more information, please visit:
anker.com/support

@Anker
@Anker Japan
@Anker Deutschland

@AnkerOfficial
@Anker_JP

@anker_official
@anker_jp

Model Number: A2034
51005002351 V02

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>