ANKER A2526HF1 Wireless Charging Dock User Guide
- June 6, 2024
- Anker
Table of Contents
ANKER A2526HF1 Wireless Charging Dock User Guide
- Your device can be used with an e-reader case. Make sure the case is not folded back when placing it onto the stand.
- Using a case more than 5 mm thick is not recommended as it may affect the wireless charging function.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom before installing or operating the product.
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- The maximum ambient temperature during use of this product must not exceed 40°C.
- Open flame sources, such as candles, must not be placed on this product.
- Only use a dry cloth or brush to clean this product.
WARNING: Only use attachments/accessories specified or provided by the manufacturer.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. Product Name: Anker Wireless Charging Dock for Kindle Paperwhite (Signature Edition) Model: Y1822 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference. RSS-Gen
Issue 5 March 2019 This device contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. RF
exposure statement:
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type Y1822 is in
compliance with Directives 2014/53/EU & 2011/65/EU & 2014/35/EU & 2014/30/EU &
2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity
is available at the following internet address: https://www.anker.com/
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type Y1822 is in
compliance with Radio Equipment Regulations 2017 & The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility Regulations 2016 & The Eco-design for Energy
Related Products Regulations 2010. The full text of the GB declaration of
conformity is available at the following internet address:
https://www.anker.com
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device is in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- The device complies with RF specifications when the device used at 20cm from your body.
Specifications
Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters)
Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Amazon, Kindle, and all related marks are trademarks of Amazon.com, Inc. or its affiliates Product Number: Y1822 Product Name: Anker Wireless Charging Dock for Kindle Paperwhite (Signature Edition)
Indoor use only
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Customer Service
**18-Month Limited Warranty***
Lifetime Technical Support
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00;
Sat-Sun 6:00-14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
(Middle East & Africa) +971 42463266 Sun-Thu 9:00 – 17:30
(UAE) +971 8000320817 Sun-Thu 9:00 – 17:30
(KSA) +966 8008500030 Sun-Thu 8:00 – 16:30
(Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30
(Egypt) +20 8000000826 Sun-Thu 7:00 – 15:30
(AU) +61 3 8331 4800 Mon-Fri 8:30 – 17:00 (AEST)
(TR) +90 0850 460 14 14 Mon-Fri 9:00 – 18:00
(RU) +8 (800) 511-86-23 Mon-Fri 9:00 – 18:00 (MSK)
( 中国) +86 400 0550 036 周一至周五 9:00 – 17:30
( 日本) 03 4455 7823 月 – 金 9:00 – 17:00
( 한국)+82 02-1670-7098 월 – 금 10:00 – 17: 00
For FAQs and more information, please visit: anker.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>