Kogan 14-in-1 Air Fryer & Multi-cooker User Guide

Kogan 14-in-1 Air Fryer & Multi-cooker User Guide

OVERVIEW

Multi-cooker Function

• a Multi cooker function controls
• b Multi cooker indicator
• c Individual function indicators
• d Display
• e Temperature indicator
• f Time indicator

Steps for Usage

1. Connect power.
2. Press a function button to select it.
3. Toggle between temperature and time.
4. Adjust either temperature or time as selected.
5. Press to put the multi-function cooker in Keep Warm mode.
6. Press to set a delay before cooking starts (e.g. for Rice Steam Stew Slow cook).
7. Press to begin operation. Press during operation to pause/resume. Long press (3 seconds) to quit the program and return to standby mode.

When in standby mode, press and hold temperature/time for 5 seconds to switch between Celsius and Fahrenheit.

Air Fryer Function

• Air fryer function controls
• Air fryer indicator
• Individual function indicators
• Display
• Temperature indicator
• Time indicator

Steps for Usage

1. Connect power and place the cover on top
2. Press a function button to select it.
3. Toggle between temperature and time.
4. Adjust either temperature or time as selected.
5. Press to begin operation. Press during operation to pause/resume ­ here you can remove the lid to check or turn food before replacing the lid and resuming. Long press (3 seconds) to quit the program and return to standby mode.

When in standby mode, press and hold temperature/time for 5 seconds to switch between Celsius and Fahrenheit.

Air Fryer Assembly
Before using air fryer functions, fit the air cover on the pot inside the body and use the latch to close the appliance firmly as per the images below.

OPERATION

Multi-cook Function
In this cooking mode, only the bottom heating plate H2 (220-240V 1250W) is heated and the bottom NTC T2 is sensitive to the temperature of the bottom outside of the inner pot. The glass cover can be used for the multi cooker function. For the Sear/Sauté function, the glass cover is not required.

Rice:

1. Select the Rice function and the screen will display “——–“.
2. Press the Start/Stop button and the machine will beep and run the program. The display will show a countdown in the last 10 minutes of the program.
3. When the program is finished, the machine will beep and enter Keep Warm for 2 hours before beeping again and entering standby.

Steam:

1. Select the Steam function and the screen will display the default time: adjust as required.
2. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
3. When the program is finished, the machine will beep and enter Keep Warm for 2 hours before beeping again and entering standby.

Stew:

1. Select the Stew function and the screen will display the default time: adjust the time as required.
2. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
3. When the program is finished, the machine will beep and enter Keep Warm for 10 hours before beeping again and entering standby.

Yogurt:

1. Select the Yogurt function and the screen will display “HEAT”.
2. Press the Start/Stop button and the machine will begin sterilization, heating to 82°C.
3. When the temperature reaches 82°C, the screen will flash “HEAT” while beeping. At this time, the milk temperature is very high and the milk should be cooled before yogurt, probiotics or lactic acid bacteria are added.
4. Press the Start/Stop button and the screen will display the default time of 8:00, counting down as it enters the yogurt fermentation state.
5. When the program is finished, the machine will beep and enter standby.

To run the program for extra time, you can press the Yogurt twice and adjust the default time as required.

Sear/Sauté:

1. Select the Yogurt function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will beep and enter standby.

Slow cook:

1. Select the Slow Cook function and the screen will display the default time and start flashing: adjust as required.
2. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
3. When the program is finished, the machine will beep and enter Keep Warm for 10 hours before beeping again and entering standby.

Keep Warm:

1. Select the Slow Cook function and the screen will display the default time and start flashing: adjust as required.
2. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
3. When the program is finished, the machine will beep and enter standby.

Delay Start:

1. After setting the temperature and time of the selected function, press Delay Start and the screen will display a default pre-set time and start flashing. (The function indicator and “Delay Start” indicator will remain on).
2. Adjust the time as required and press Start/Stop: the machine will beep and count down to the set time. When the set time is reached, the machine will continue with the programmed function.

Air Fryer Function
During this cooking mode, the heating pipe H1 (220-240V 1300W) at the top and the heating plate H2 (220-240V 1250W) at the bottom are heated alternately. The motor at the top (220-240V 30W) works according to the requirements of each function. The top NTC T1 is responsible for sensing the air temperature at the top and the bottom NTC T2 is responsible for sensing the temperature at the bottom of the inner pot and the outside.

Broil:

1.  Select the Broil function and the screen will display the default time: adjust as required.
2. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
3. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.

Fries:

1. Select the Fries function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.

Bake:

1. Select the Bake function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.

Beef:

1. Select the Beef function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.

Roast:

1. Select the Roast function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.

Dehydrate:

1. Select the Dehydrate function and the screen will display the default temperature and start flashing: adjust as required.
2. Press Temp/Time to switch to Time: adjust as required.
3. Press the Start/Stop button and the machine will beep and begin to preheat. Once preheating is complete, it will beep again and show the time remaining.
4. When the program is finished, the machine will display “DONE” for 2 minutes before entering standby.

Multi-cooker Function

1. Remove all packaging material and place the machine on the flat table.
2. Ensure inner pot, accessories and glass lid are clean.

3. Cover the glass lid, then connect the cooker to power: the Multi Cooker indicator will illuminate when it is ready to use.

4. To select a function, press the relevant button (“Sear/Sauté” in the below example) Once the function has been selected, the LED will display the default temperature and the Temp indicator will turn on. Press + / – to adjust temperature and press the Temp/Time button to confirm: the Time indicator will turn on.

Press + / – to adjust time and press the Temp/Time button to confirm.

5. Press Start/Stop to begin. To delay start, press “Delay Start” after setting the time and temperature, then press + and – to set the desired delay and then press Start/Stop to begin. The countdown will be displayed on the screen and the function will begin after the countdown has finished.

6. For the Rice, Steam, Stew and Slow cook functions, the unit will automatically enter the “Keep Warm” state. To disable, press “Keep Warm” to toggle the setting off after selecting the function.

Note: The air fryer lid cannot be used while using the multi cooker function.

Air fryer function

Add the rack and any food to be fried, then shut the lid and lock in place with the latch as shown below:

1. Select one of the following functions: Broil, Fries, Bake, Beef, Roast and Dehydrator.

2. Set the time and temperature and press Start/Stop button: the unit will begin preheating with a countdown. To check the food while preheating:

• Press Start/Stop button to pause
• Undo the latch and open the lid
• Shut the lid and close the latch tightly, then press Start/Stop again to resume countdown

Program overview

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>