ricoo FS0116-v2009 Monitor Desk Instruction Manual

Table of Contents

Read the entire instruction manual and warning labels carefully before starting the installation process.
Make sure you have all the necessary parts and tools before starting the assembly process.
This product is designed to be installed by a professional or someone with experience in construction.
Ensure that you and any assistants or authorized personnel have read and understood the instruction manual and warning labels before beginning the installation process.
Do not exceed the maximum load weight of 10kg (22 lbs) as it may result in property damage or serious injury.
Follow the assembly instructions provided in the manual to install the mounting bracket.
When the installation is complete, ensure that the product is securely attached to its designated location.

Note: Contact support@ricoo.de or visit www.ricoo.eu for further assistance or inquiries.

Warning: Do not exceed the listed load weight. Property damage or serious injury may occur.

Scope of delivery

ricoo-FS0116-v2009-Monitor-Desk-FIG-1

The numbering on the plastic bag may differ/missing completely.

Dear customer,

we are pleased that you have decided on a product of the brand “RICOO”.
Sometimes, despite our efforts to provide you with a high-quality product, it may happen that an accessory is missing or a part is damaged during transport. Please do not return the item in such a case, simply request replacement for the missing or damaged part at our customer hotline. Contact details from our customer hotline are listed below.
When contacting us, please mention the article data (listed on top), article color as well as the required spare part numbers (including the required quantity of items), as indicated in the “Scope of delivery” section of this manual.
Please keep ready your order number/order ID for our customer hotline. We will process your request immediately!

ricoo-FS0116-v2009-Monitor-Desk-FIG-2 ricoo-
FS0116-v2009-Monitor-Desk-FIG-2

NOTE: Read the entire instruction manual before you start installation and assembly.

Please note: Images in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
This product may only be assembled/installed by the technical staff.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt, request help from an expert.
Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.

E.N.Z. Engineering GmbH Salzmatten 6 79341 Kenzingen (Germany)