kogan KAANCTW9BKA NC9 Active Noise Cancellation True Wireless Earphones User Guide

: June 6, 2024
: Kogan

Table of Contents

SAFETY & WARNINGS
COMPONENTS
OVERVIEW
OPERATION
Basic function
Charging
SPECIFICATIONS
NOTES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

USER GUIDE

kogan KAANCTW9BKA NC9 Active Noise Cancellation True Wireless Earphones
--

NC9 ACTIVE NOISE CANCELLATION TRUE WIRELESS EARPHONES
KAANCTW9BKA

SAFETY & WARNINGS

User Safety Instructions

To avoid any possible hearing damage, keep the volume at a moderate level.
Avoid listening to music at loud volume levels for prolonged periods, as this may cause permanent hearing damage or hearing loss.
Please be aware of the surroundings and do not use the earphones while driving, cycling, running, or jogging or when doing any activity which requires your attention and ability to hear.

Product Safety Warning

For best results and long battery life, please disconnect the USB cable after charging is complete.
Please use an AC adaptor with max output voltage and current of 5V/1A. If the output voltage and current of the charger exceed the recommended power, it may cause severe damage to the product and void the product warranty.
Use the original charging cable for charging the charging case.
Charge the earphones and the charging case at least once every 6 months, for the good life cycle of the product.
Don’t jam the ports of the earbuds, such as charger port, LED port and microphone (etc)
· Store in a cool and dry place, Keep away from hot and humid conditions.
The battery is designed for the last lifecycle of the product. It should only be removed by a recycling facility. An attempt to remove or replace the batteries will damage the product and void the warranty.

COMPONENTS

kogan KAANCTW9BKA NC9 Active Noise Cancellation True Wireless Earphones --
COMPONENTS

OVERVIEW

kogan KAANCTW9BKA NC9 Active Noise Cancellation True Wireless Earphones --
OVERVIEW

Multi-function button (MFB)
LED Indicator
Microphone
Charging Case LED Indicator
Charging Case USB port

OPERATION

Wearing method

Gently insert the earphones into the earthen adjust the appropriate comfort.
Try different-sized ear caps for a comfortable fit and good sound performance. Choose the ear caps that seal your ear canal properly for good sound performance. You may need different-sized ear caps for left and right.

Basic function

Power on/off

To power on the earphones simply remove the earphones from the charging case, earphones will automatically turn ON if they are charged.
To power off the earphones put the earphones back in the charging case. To power off without the chase, hold the MFB for 5 seconds.
If earphones are power off outside the case, touch and hold the MFB button for 3 seconds on both sides to turn them on.
Turn on both earbuds, one earbud indicator starts flashing alternately with white and orange and the right earbud indicator is turn off. The product is ready for use.

Bluetooth connection

Turn on the Bluetooth function on your device and search for “Kogan NC9 Earphones” in the Bluetooth menu. Select “Kogan NC9 Earphones” and you will hear a prompt tone when pairing is successful.
Pairing mode can last 180 seconds. If you do not begin connection in that time, you need to restart the device and repeat the steps to reattempt.
Once the connection is successful, you can start using the earphones.
To disconnect, simply put the earphones back in the charging case and the earphones will automatically disconnect from any paired devices.
To reconnect the earphones with the same device, simply remove the earphones from the charging case and the earphones will automatically connect to your device. (Make sure that the Bluetooth is turned on the device). To stops the earphones to auto-connect to any device, delete the earphones from the Bluetooth menu of that device.
To enjoy calls, music and audio output from your device to the earphones, make sure that the media connection for both calls and media files is activated in the Bluetooth menu.
Note: The earphones will lose the connection when deviate the working range of Bluetooth. The earphones will reconnect automatically if you come back to the range in 3 minutes.

Answering incoming calls

Short press left or right MFB to answer incoming calls.

End the call

Short press the left or right MFB to end the current call.

Decline incoming calls

Touch and hold the left or right MFB for 2 seconds to reject a call.

One key for voice assistant

Triple tap the left or right MFB to activate voice assistant.

Music playing

Play/Pause: tap the left or right MFB once;
Double press the left MFB to switch to the previous song
Double press the right MFB to switch to the next song

Active Noise Cancellation function (ANC function)

Touch and hold the left or right MFB for 2 seconds each time, the function will switch as follows with voice prompts.
When the prompt “ANC on” can be heard, the ANC function is switched on and the monitor function (listening to ambient noise) is switched off.
When the prompt “ambient” is heard, the ANC function is switched off and the monitor function is switched on.
When the “ANC off” prompt is heard, the ANC function and the monitor function are switched off.

Mono mode (Single earbud use)

Note: Single channel mode only needs to remove one of the earbuds from the charging case. If two earbuds are removed from the case before connection, the earbud will be used in bilateral channel mode by default.
Take out an earbud from the charging case, the earbud will automatically turn on and reconnect to previously connected devices.
To switch from one earbud to the other when playing music, remove the second earbud from the charging case. The two earbuds will connect automatically. Put the first earbud (the one you no longer wish to use) into the charging case and the switching process completes.

Restore factory settings

If the earbuds cannot pair or disconnect frequently, please restore the factory settings.
Turn on both earbuds and tap the left and right MFB four (4) times. When one earbud indicator starts flashing alternately with white and orange and the other earbud indicator is turned off, the reset is completed.

Charging

Case:

Charge the case using the Type-C cable connected to a computer or wall charger. The indicator at the front of the charging case flashes white when charging and turns white when fully charged. The charging time is approximately 1.5 hours.

Earphones:

Put the earbuds back into the charging case for charging. While charging, the indicators turn orange. Once full charged, the orange lights turn off.

SPECIFICATIONS

Bluetooth Version	V5.0
Charging Case Dimensions	63mm x 45mm x 30mm
Earbud Dimensions	21 x 21mm x 30mm x 2
Net Weight	4.8g x2 (Earbuds)

4.5 hours (ANC and Bluetooth)

Talk Time| 6 hours
Charging Case Charge Time| 1.5 hours

NOTES

——————————————————————————

Need more information?
We hope that this user guide has given you the assistance needed for a simple setup. For the most up-to-date guide for your product, as well as any additional assistance you may require,
head online to help.kogan.com
kogan KAANCTW9BKA NC9 Active Noise Cancellation True Wireless Earphones --
....LOGO