nuwave B01M9FGKAB 32109 9-Inch Ceramic Non-Stick Fry Pan User Guide

Quick Start Guide

What you get

9-Inch Ceramic Non-Stick
**Fry Pan*
Part #: 32109
(Optional with certain models)
PIC Flex
Part #: 30532**

Getting Started

Temperatures and times can be adjusted on all functions before and during the cooking process.

Start cooking. 375°F (191°C) for 1 hour are the defaults.
Press Start to begin cooking.
Note: Press Pause/Clear during cooking to pause the PIC. Press Start to resume. Press Pause/Clear twice to clear.
Changing Fahrenheit to Celsius.
Press Prog. Press – once to display Fahrenheit. Press – again to display Celsius. Press Pause/Clear to finish.
Adjust the cooking temperature.
Increase or decrease the temperature manually by selecting one of the six temperature settings or by pressing + or – to adjust the temperature by 10-degree increments (6° then 5°C and then alternates all the way up).
Note: Refer to the owner’s manual for details.
Changing cooking time while cooking.
Cook for a specific time, or longer than 1 hour. Press lime, then press + or – to adjust the time.
Note: The flashing digit is the number being altered.
Stage/Program cooking.
Program the PIC Flex to cook at different temperatures for different amounts of time. Ex: High for 5 min. then Low for 3 min.
Press Prog to set the stages. Press High, Time and then press + five times for 5 min. at High. Press Low, lime, and then press + three times for 3 min. at Low. Press Start to begin cooking.
Note: You can add additional stages by repeating the steps above with your desired temperature and time before pressing Start.
Delay cooking.
You can program the PIC to delay cooking. Ex: Delay cooking for 6 min., then cook on High for 3 min.
Press Prog to set the delay. Press Time then press + six times to delay for 6 min. Press Prog then press High. Press Time and then
press + three times to cook for 3 min. Press Start to begin cooking.
Note: Refer to owner’s manual for details.
Watts controls the power consumption of your PIC. The default wattage on the PIC is 1300W.
If you use the PIC in a location with limited wattage you can adjust the PIC’s wattage. Press Watts until you reach the appropriate wattage.
Note: When cooking at lower wattages cooking times may increase slightly.

PIC Specs

Cooking Area
The heating surface is located inside the thicker silver ring. The minimum diameter of acceptable cookware is 3 inches (76mm). Always place cookware in the center of the heating circle. You may use pans measuring up to the total width of the PIC Flex, which measures 10 inches (254mm). However, in these situations, heat will transfer more lowly to the outer edges. Not recommended for pans larger than 10 inches (254mm). There are no open flames or hot coils and the NuWave Precision Induction Cooktop Flex remains cool to the touch where not magnetically activated. The appliance can accommodate up to a 50-pound (22kg) weight load.

600W
5.0 Amps| 900W
7.5 Amps| 1300W
10.8 Amps
Sear| 600W| 900W| 1300W
High
(425F∼490F)
(218C∼254C)| 600W| 900W| 1200W
Med/High
(375F∼420F)
(191C∼216C)| 600W| 900W| 1000W
Med
(275F∼370F)
(135C∼188C)| 600W| 800W| 800W
Med/Low
(175F∼270F)
(79C∼132C)| 600W| 600W| 600W
Low
(100E∼170F)
(38C∼77C)| 600W| 600W| 600W

*Based on line voltages registering 120V.
PIC On The Go
For those cooking on the road or open water, the operation of the NuWave PIC Flex requires up to 10.83 amps when used on an RV or boat. The cooktop uses up to 1300W of energy depending on the temperature and wattage setting. The appliance may be plugged into any standard electrical outlet, but cannot operate on batteries.

Note: Temperatures and times may need minor adjustments to best suit your desired results.
Prepackaged Foods: Follow the directions on the package and reduce temps and times by 15%. Check periodically.

Beet/Lamb| Temp| Fresh – Minutes| Frozen – Minutes| Internal Temp.
---|---|---|---|---
Patties 1 inch (25mm) thick| 370°F/188t| 00:10| 00:18 – 00:20|  (Thermometer) 160°F/71°C
Steaks 1 inch (25mm) thick’| 400°F/204°C| 00:02 – 00:03 00:03 – 00:04 00:04 – 00:05 00:05 – 00:06 00:06 – 00:07| 00:08 – 00:10 00:10 – 00:12 00:12 – 00:14 00:14 – 00:16 00:16. 00:18| Rare: 125°F – 134°F
Med. Rare: 135°F – 144°F
Medium: 145°F/63°C – 149°F
Med. Well: 150°F – 159°F
Well: 160°F/71°C
Beef Stew| 325°F/163°C| 03:00 – 04:00 hours| 04:00 – 05:00 hours| Well: 1E0°F/71°C and higher
‘Let rest 10 minutes before serving.
Poultry
Chicken Breasts, Legs, Thighs, Bone-In| Temp 380°F/193°C| Fresh – Minutes
0020 – 00:40| Frozen – Minutes
00:45 – 00:55| Internal Temp. (Thermometer)
165°F/74°C
Boneless/Skinless Chicken Breasts. 2 (6-8 oz) (107-227g)| 380°F/193°C| 0009 – 00:11| 00:14 – 00:16| 165°F/74°C
Turkey Breast (cutlet)| 360°F/182°C| 0005 – 00:08| 00:10 -00:15| 165°F/74°C
Duck Breast 6 to 10 oz (170-283g)| 360°F/182°C| 00:10 – 00:14| 00:15 – 00:18| 165°F/74°C
Chicken Sausage Pork
Bacon| 360°F/182°C Temp
400°F/204°C| 00:10 – 00:15 Fresh – Minutes
00:08 – 00:10| 00:15 – 0020
Frozen – Minutes Extra-crispy.’| 165°F/74°C
Internal Temp. (Thermometer)
For extra crispy cook an additional 2-3 minutes
Sausage Links (1-oz links) (28g)| 375°F/191°C meadow| 00:12 – 00:16| 00:14 – 00:16| 160°F/71°C
Sausage Patties (2 oz) (57g)| 175°F/79°C| 00:12 – 00:14| 00:15 – 00:16| 160°F/71°C
Italian Sausage, Bratwurst, etc.| 375°F/191°C| 00:09 – 00:13| 00:17 – 00:21| 160°F/71°C
Chops, 2-3, (6-oz pork chops) (170g)| 375°F/191°C| 00:10 – 00:12| 00:18 – 0021| 145°F/63°C
Tenderloins (1142 Ibs) (6809 – 907g)| 350°F/177°C| 00:18 – 0020| 00:28 – 00:30| 145°F/63°C
Hot Dogs (boiled In water) Seafood| 350°F/177°C Temp
400°F/204°C| 00:05
Fresh – Minutes
00:05 -00:07| 00:05
Frozen – Minutes
00:10 – 00:12| 140°F/60°C
Internal Temp. (Thermometer) 145°F/63°C
Fish: Fillets, Si inch (13mm) thick
Fish: Steaks and Fillets, 1 inch thick| 400°F204°C| 00:10 – 00:12| 00:14 – 00:18| 145°F/63°C
Shrimp (6-12 large, boiled)| 400°F/204°C| 00:03 – 0005| 00:14 – 00:17| Cooking time may vary with size.
Scallops, Sea (6-12, large)| 400°F/204°C| 00:04 – 0005| 00:10 – 00:14| Scallops and/or lobster turn opaque when cooking is complete.
Scallops, Bay (6-12, large)
Vegetables
Corn on the Cob (2-4 pc., boiled in water)| 400°F/204°C Temp
350°F/177°C| 00:06 – 0008 Fresh – Minutes
00:05 – 0006| 00:08 – 00:10 Frozen – Minutes|
Alternative, season to taste,
Potatoes: Pancakes Cut in li lengthwise French Fries| 350°F/177°C| 00:05 – 00:06
00:05 – 00:08
00:03 – 00:06| 8 oz each
Broccoli (6-12 oz, boiled in water) (170-340g)| 350°F/177°C| 00:04 – 00:05| Varies in thickness.
Squash (I4-inch /6mm slices)| 350°F/177°C| 00:02 – 00:04| Cut in half, remove seeds and membrane, place in a shallow dish, brush with oil.
Eggplant, Y2-inch (13mm) slices (1 pm, sliced)| 350°F/177°C| 00:04 – 00:06|

Compatible Cookware
Three simple ways to check if your existing pots and pans or future cookware purchases are compatible with the NuWave PIC Flex:

1. A magnet is typically a great indicator. If it sticks to the bottom of a piece of cookware this typically means the pot or pan is induction-ready. However, be cautioned that there are instances when a cooking vessel’s magnetic properties may not be strong enough for the pot to work efficiently with the PIC Flex.
2. Place a small amount of water in a pot or pan. If induction compatible, water will begin to boil.
3.  An induction-ready symbol may be printed on the bottom of the cookware.

E1 Error
An E1 reading typically means that your PIC Flex does not detect cookware on its surface. This can occur for one of two reasons:

1. The induction coils contained within the PIC Flex will only work when they are in direct contact with a piece of cookware. To maintain your appliance’s effectiveness, always ensure that it rests on a flat surface and that contact is consistent with your cookware.
2. An E1 message may also occur if your chosen cookware is not induction-ready.
   When an E1 error occurs the PIC will beep every 2 seconds until it detects a pot. If the PIC has not detected a pot after 1 minute, it will shut off automatically. In order to resume cooking, place induction-ready cookware on the PIC’s surface then press Start.

Troubleshoot Guide

E7 Error & Cooking Fan
An E7 error is displayed when the PIC becomes overheated. This is typically caused by obstruction of the PIC’s underside Cooling Fan. Always ensure that the PIC Flex is placed on a flat, level surface with the cooling fan unobstructed. Typical interferences include tablecloths, wooden cutting boards, placemats, etc.
PIC & Pacemakers
Scientific tests have proven inconclusive as to whether the electrical field will disrupt the function of a pacemaker. Please consult your doctor or medical professional for guidance before use.

©2020 NuWave LLC • All Rights Reserved. • Customer Service: 1-877-689-2838 • help@nuwavenow.com
Item No: BQ30501-30532-• Rev. 11-OG • 11-23-20 • DV01 PC1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>