logitech G502 Lightspeed and Pro Wireless Gaming Mice User Guide
- June 6, 2024
- Logitech
Table of Contents
Wireless Charging System
SETUP GUIDE
SETUP INSTRUCTIONS
- Turn off mouse
- Plugin charging base
- Replace weight module with POWERCORE charging module
- Turn mouse on
FAQ/TROUBLESHOOTING
G logo on POWERPLAY control box does not illuminate
– Ensure the USB cable is firmly connected directly to PC and POWERPLAY
control box, or to a powered USB hub
G logo on POWERPLAY control box continuously flashes blue while plugged
into PC
– LED flashing blue indicates the mouse is not paired to the integrated
LIGHTSPEED wireless receiver in POWERPLAY control box Turn mouse off, wait
three seconds, and turn it back on Mouse and integrated LIGHTSPEED wireless
receiver should pair automatically
– If the mouse has been previously paired to another POWERPLAY charging base,
ensure that the mouse’s included nano receiver is not plugged in then turn the
mouse off, wait three seconds, and turn it back on Mouse and integrated
LIGHTSPEED the wireless receiver should pair automatically
Mouse does not charge or power on, white LED on the POWERPLAY control box
does not turn on
– Ensure POWERCORE module is properly inserted incompatible wireless gaming
mouse (G703 or G903 wireless gaming mouse)
– magnets should connect firmly and G logo should be oriented as shown
– If POWERPLAY is placed on a metal table, charging performance may be
degraded or prevented entirely Do not use on a metal table
– Ensure there are no foreign objects (e g keyboards or mobile phones) on the
charging base Charging performance may be degraded or prevented entirely
– Ensure POWERCORE module is positioned inside charging area (see diagram
below) when not in use
Field size and shape is approximate
– Ensure only one POWERCORE module is located on the charging base – POWERPLAY
charging base produces only enough power to charge one device at a time
– Ensure mouse battery is not removed POWERPLAY charging base cannot power a
mouse with no battery Removing the battery from a G703 or G903 wireless gaming
mouse voids its warranty
– If the mouse battery is at 0%, it may take up to 5 minutes for adequate
charge to be built up for use For faster charging, or to charge to 100%, plug
included USB cable into the mouse
– POWERPLAY charging base is validated for use only with included cloth or
hard mouse pad, or their retail replacement equivalent Thicker pads or pads
made of different materials (such as metal) can cause charging performance to
be degraded or prevented entirely
Battery does not charge to 100%
– This is by design and is intended to minimize power emission and optimize
battery cycles Mouse battery level will be maintained between 85% and 95%
while powered by the POWERPLAY charging base
White LED goes dim or turns off
– The white LED indicates three states: no connection between POWERPLAY and
POWERCORE (LED off), a connection between POWERPLAY and POWERCORE, but
charging is not active (LED dim white), and a connection between POWERPLAY and
POWERCORE with charging active (LED bright white)
Can I use a different USB cable than the supplied one?
– No POWERPLAY is designed to be used with the included USB cable only
Can I physically modify the POWERPLAY charging base?
– No Do not cut, fold, roll, bend, or otherwise modify the POWERPLAY charging
base Doing so will void the warranty and may damage the charging coil
QUESTIONS
http://support.logitech.com/product/POWERPLAY
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>